1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Jun 24, 2020 at 6:46 PM
    #9661
    nimby

    nimby in the drink

    Joined:
    Mar 27, 2017
    Member:
    #3777
    Messages:
    4,451
    First Name:
    Jake
    California
    Vehicle:
    2018 SR5P
    That looks really nice!
     
    DrewMan and 7385 like this.
  2. Jun 24, 2020 at 7:43 PM
    #9662
    DrewMan

    DrewMan 2016 4RTP-KDSS

    Joined:
    Mar 19, 2017
    Member:
    #3731
    Messages:
    399
    Gender:
    Male
    Middle Tennessee
    Vehicle:
    2016 Magnetic Grey 4Runner Trail Premium
    Bilstein 5100 Series Shocks, Daystar 1.5" Rear Coil Spacer (Mid Left), Level 8 Tracker Pros 17x9, 275/70/R17 B.F. Goodrich TKO's, N-Fab Nerf Steps
    Can you share Manufacturers Website?
     
  3. Jun 24, 2020 at 7:44 PM
    #9663
    4Runner fun

    4Runner fun Just the beginning...

    Joined:
    Mar 18, 2019
    Member:
    #9220
    Messages:
    2,575
    Gender:
    Male
    First Name:
    Ryan
    Nebraska
    Vehicle:
    2019 Black T4R TRD Off Road Premium
    Wrangler Duratracs, center console organizer & trav all 1576 dog divider for the rear. Xpel wrap with ceramic coating. 20% tint on front windows. TRD intake. TRD oil cap Plus parts on shelf & a wish list.
    Do I actually see a skid that has recessed screws/bolts for fasteners? Every manufacturer has been wrong in my eyes using protruding fasteners. If you use it they will deform and be useless.
    Thanks for the info. Time to look again...
     
    White runner, nimby, A&P and 2 others like this.
  4. Jun 24, 2020 at 7:49 PM
    #9664
    4Runner fun

    4Runner fun Just the beginning...

    Joined:
    Mar 18, 2019
    Member:
    #9220
    Messages:
    2,575
    Gender:
    Male
    First Name:
    Ryan
    Nebraska
    Vehicle:
    2019 Black T4R TRD Off Road Premium
    Wrangler Duratracs, center console organizer & trav all 1576 dog divider for the rear. Xpel wrap with ceramic coating. 20% tint on front windows. TRD intake. TRD oil cap Plus parts on shelf & a wish list.
    2A4R, 7385 and DrewMan[QUOTED] like this.
  5. Jun 24, 2020 at 7:55 PM
    #9665
    4Runner fun

    4Runner fun Just the beginning...

    Joined:
    Mar 18, 2019
    Member:
    #9220
    Messages:
    2,575
    Gender:
    Male
    First Name:
    Ryan
    Nebraska
    Vehicle:
    2019 Black T4R TRD Off Road Premium
    Wrangler Duratracs, center console organizer & trav all 1576 dog divider for the rear. Xpel wrap with ceramic coating. 20% tint on front windows. TRD intake. TRD oil cap Plus parts on shelf & a wish list.
    $2k... ouch. However, I may be sold!
    You get what you pay for. I am pretty sure that main section covers everything but the A-arms. That is impressive. I wonder what the cost to coat is...
    Screenshot_20200624-215222_Chrome.jpg
    Screenshot_20200624-220039_Chrome.jpg
    * edit.
    Not bad...
     
    Last edited: Jun 24, 2020
    7385 likes this.
  6. Jun 24, 2020 at 8:00 PM
    #9666
    DJD33

    DJD33 New Member

    Joined:
    Mar 5, 2020
    Member:
    #13417
    Messages:
    46
    Gender:
    Male
    First Name:
    Dustin
    Indiana
    Vision wheels General grabber ATX tires Readylift 3/2, Baja Rack and lader
    looks good love the color of the runner
     
    mrmike7189 and Horizon[QUOTED] like this.
  7. Jun 24, 2020 at 8:07 PM
    #9667
    DrewMan

    DrewMan 2016 4RTP-KDSS

    Joined:
    Mar 19, 2017
    Member:
    #3731
    Messages:
    399
    Gender:
    Male
    Middle Tennessee
    Vehicle:
    2016 Magnetic Grey 4Runner Trail Premium
    Bilstein 5100 Series Shocks, Daystar 1.5" Rear Coil Spacer (Mid Left), Level 8 Tracker Pros 17x9, 275/70/R17 B.F. Goodrich TKO's, N-Fab Nerf Steps
  8. Jun 24, 2020 at 9:36 PM
    #9668
    SLoTH_XVX

    SLoTH_XVX New Member

    Joined:
    Jun 21, 2018
    Member:
    #6311
    Messages:
    231
    Gender:
    Male
    First Name:
    Kevin
    Vehicle:
    2015 4Runner SR5 Premium White
    6" Fabtec Suspension Lift 35x12.5 Fuel Gripper M/T Tires 18" Fuel - Vapor Wheels
    Very nice.

    Where did you get the stereo and speakers from? Would you mind sharing what you paid for them?

    How was the install? Take long?
     
    Backwoods[QUOTED] likes this.
  9. Jun 24, 2020 at 9:39 PM
    #9669
    SLoTH_XVX

    SLoTH_XVX New Member

    Joined:
    Jun 21, 2018
    Member:
    #6311
    Messages:
    231
    Gender:
    Male
    First Name:
    Kevin
    Vehicle:
    2015 4Runner SR5 Premium White
    6" Fabtec Suspension Lift 35x12.5 Fuel Gripper M/T Tires 18" Fuel - Vapor Wheels
    They look smoked...? Do you mind sharing what you paid for them and where you got them from? Any chance they are sequential too?
     
  10. Jun 25, 2020 at 6:38 AM
    #9670
    doc4216

    doc4216 New Member

    Joined:
    May 27, 2018
    Member:
    #6112
    Messages:
    368
    Gender:
    Female
    First Name:
    Shannon
    The Land of Cle
    Vehicle:
    2015 SR5 Premium
    Dasaíta HU, Bilstein 5100s, AT Tires, Coveted grill lights
    4 Sticks likes this.
  11. Jun 25, 2020 at 9:32 AM
    #9671
    Backwoods

    Backwoods New Member

    Joined:
    Aug 7, 2019
    Member:
    #10814
    Messages:
    436
    Gender:
    Male
    Vehicle:
    2019 silver SR5 4x4
    I will start with install first....

    Speakers in the doors and hatch are very easy. Took maybe about an hour for all 6. The idatalink maestro unit for the radio has to be programmed, and i had the radio and maestro unit installed by someone else. Took them roughly 2 hours. The subs and amp took me about 3 hours... But i wanted everything installed very clean looking and even removed the passenger seat completely to get it done. Pushing the power wire through the firewall wasnt fun. I ran it over to the passenger side then went though on that side since the amp was installed under passenger seat.

    Cost....

    If you just mean the headunit and mids/highs, i got all of that from crutchfield. The headunit with maestro idatalink and maestro wiring harness, dash kit, dual usb plug and everything cost around $900. $650 for the radio alone without maestro. Speakers would be around $250 more for all doors and rear hatch. I had a gift card, reward points, and a military discount, so im just giving you the prices you would pay without all of that.

    Subs and amp, Well.... I got those on a trade....
     
  12. Jun 25, 2020 at 4:46 PM
    #9672
    LORDxGORDO

    LORDxGORDO New Member

    Joined:
    Oct 13, 2019
    Member:
    #11648
    Messages:
    58
    Gender:
    Male
    First Name:
    Luis
    Vehicle:
    2016 SR5 midnight black tforce
    TRD Skid Plate Nfab tforce rockslides/sidesteps BDcustomz lower grille Aiden James drl led fog bezels Phillips led fog lights Xenondepot HID low beams Springtail Solutions pet barrier - modified Ellis precision shifter knob
    What light set up do you have on your upper grille?
     
  13. Jun 25, 2020 at 6:51 PM
    #9673
    ForRun

    ForRun 4Runner

    Joined:
    May 25, 2019
    Member:
    #10019
    Messages:
    3,045
    Gender:
    Male
    Vehicle:
    2020 orp
    Link below. Another brand out called USR has good reviews also
    https://www.ebay.com/itm/293498897815
     
    This site contains affiliate links for which the site may be compensated.
  14. Jun 25, 2020 at 7:02 PM
    #9674
    lostenergy

    lostenergy New Member

    Joined:
    Dec 19, 2018
    Member:
    #8127
    Messages:
    22
    Vehicle:
    2018 TRD Off Road Premium
    Bilstein 5100 shocks Dobinsons C59-314 front coils Total Chaos upper control arms Cornfed 1.5" spacer rear Icon Rebound rims Infinity speakers in all doors 12" JL sub Kustom 54 headlights Morimoto LED Fog Lights Bedliner Valences
    Did you have to destroy the stock speakers to mount the new ones or buy brackets? Or do the newer models not need adapters anymore? I put all new speakers in my ‘18 and it took way longer than an hour lol. Did you wire the dash tweeters into your coaxial 6x9’s?
    Here’s a link to the adapters I’m referring to since the aftermarket speakers do not line up with factory mounting locations.
     
  15. Jun 25, 2020 at 7:10 PM
    #9675
    travieb1

    travieb1 New Member

    Joined:
    Mar 25, 2019
    Member:
    #9296
    Messages:
    121
    Gender:
    Male
    First Name:
    Travis
    Seattle
    Vehicle:
    2018 Toyota SR5 premium with 3rd row seating
    2018 SR5 Premium with sunroof and 3rd row seating- tinted windows, debadged side emblems, blacked out rear emblems, AVS low profile Rain Deflectors, AVS Aeroskin 2, Toyota Cargo cover, AJT Design Fob, AJT billet Aluminum red TRD battery bracket, AJT climate control knobs, TRD Skid Plate with Red TRD Inlays, Custom Fuse/Relay Block fabbed from High-Density Polyurethane, Borla Exhaust, N-Fab Nerf Bars, Blue Sea battery meter with additional USB and cigarette lighter with full time power, OEM Audio Plus Reference 500Q System with dual Sub Woofer, Fulltime backup camera mod with AOB switch, Precision LED Full interior LED lighting kit, Xenon Depot HID kit, Diode Dynamics switchback Turn signal LEDs, Precision LED backup LEDs, Diode Dynamics taillight as blinker mod, AJT Customs DRL’s, Toyota “Canadian” 3rd row Cargo mat, Bilstein 5100’s, Toytec 3” lift, JBA Upper Control Arms, Nitto Ridge Grapplers 285/70/17, YodaTEQ Underhood Lighting Kit, TRD hood with flat black hood insert, TRD shift knob, TRD Oil cap, TRD Cold Air Intake, TRD SEMA wheels, Spidertrax spacers, Diode Dynamics SS3 fog-lights, Matte black painted TRD front end, TRD valances front and back painted matte black, Gobi Stealth rack, Gobi ladder, Rotopax with Red Fuel pack, Overland Equipped bolt on step, Kuat bike rack, White Raptor lights with Yoda LED’s switch, Pedal Commander, sequential side mirror blinker LED’s, Bunker Industries Recovery Boards with custom roof mounts, Tepui Awning with Gobi stealth mounts, CVT Mt Shasta Extended Summit Edition RTT, Southern Style Off-road Lo-Pro bumper with 20” Rigid light bar, Accessorides Remote Start.
    Wired my 20” Rigid light bar into the fuse/relay block with a custom harness... in related news, anyone need a Rigid wire harness? ;)0A3C9D23-490C-40D6-ACB6-48B4D4E792FF.jpg
     
    mrmike7189, 4 Sticks and kbp810 like this.
  16. Jun 26, 2020 at 12:18 AM
    #9676
    kbp810

    kbp810 rebmem wen

    Joined:
    Feb 24, 2019
    Member:
    #8935
    Messages:
    616
    Gender:
    Male
    You’ll still either need adapters, or cut up the stock speakers to make your own. Some places like crutchfield include adapters for free when you buy the speakers from them.
     
  17. Jun 26, 2020 at 4:05 AM
    #9677
    2A4R

    2A4R New Member

    Joined:
    Dec 17, 2019
    Member:
    #12363
    Messages:
    239
    Gender:
    Male
    Northern VA
    Vehicle:
    19 4R TRD PRO
    Looks great, love how it matches the raptor lights and the fog light thingys.

    Why/how did you make a custom wiring harness?? What's wrong with the supplied one?

    I just installed my 40" rigid E-series the other weekend and was having trouble wiring it to the air on board OEM matching switch. I got it wired to the basic switch supplied by Rigid, but I was going to take it to a truck shop to get it wired to the air on board switch
     
    travieb1[QUOTED] likes this.
  18. Jun 26, 2020 at 10:19 AM
    #9678
    travieb1

    travieb1 New Member

    Joined:
    Mar 25, 2019
    Member:
    #9296
    Messages:
    121
    Gender:
    Male
    First Name:
    Travis
    Seattle
    Vehicle:
    2018 Toyota SR5 premium with 3rd row seating
    2018 SR5 Premium with sunroof and 3rd row seating- tinted windows, debadged side emblems, blacked out rear emblems, AVS low profile Rain Deflectors, AVS Aeroskin 2, Toyota Cargo cover, AJT Design Fob, AJT billet Aluminum red TRD battery bracket, AJT climate control knobs, TRD Skid Plate with Red TRD Inlays, Custom Fuse/Relay Block fabbed from High-Density Polyurethane, Borla Exhaust, N-Fab Nerf Bars, Blue Sea battery meter with additional USB and cigarette lighter with full time power, OEM Audio Plus Reference 500Q System with dual Sub Woofer, Fulltime backup camera mod with AOB switch, Precision LED Full interior LED lighting kit, Xenon Depot HID kit, Diode Dynamics switchback Turn signal LEDs, Precision LED backup LEDs, Diode Dynamics taillight as blinker mod, AJT Customs DRL’s, Toyota “Canadian” 3rd row Cargo mat, Bilstein 5100’s, Toytec 3” lift, JBA Upper Control Arms, Nitto Ridge Grapplers 285/70/17, YodaTEQ Underhood Lighting Kit, TRD hood with flat black hood insert, TRD shift knob, TRD Oil cap, TRD Cold Air Intake, TRD SEMA wheels, Spidertrax spacers, Diode Dynamics SS3 fog-lights, Matte black painted TRD front end, TRD valances front and back painted matte black, Gobi Stealth rack, Gobi ladder, Rotopax with Red Fuel pack, Overland Equipped bolt on step, Kuat bike rack, White Raptor lights with Yoda LED’s switch, Pedal Commander, sequential side mirror blinker LED’s, Bunker Industries Recovery Boards with custom roof mounts, Tepui Awning with Gobi stealth mounts, CVT Mt Shasta Extended Summit Edition RTT, Southern Style Off-road Lo-Pro bumper with 20” Rigid light bar, Accessorides Remote Start.
    I made it custom because I wanted all the wires to be the exact length they needed to be (to make for a clean install) and also wanted to utilize the custom fuse/relay I already had. Otherwise I would had to slice open the provided harness to try and pull out the wires to appropriate length, and mount the relay somewhere. The way I did it, I have all my fuses and relays in one place. Also I kind of like the preciseness of it all and enjoy the process.

    I too installed an AOB switch to operate it. It’s really not that hard and I can help walk you through the steps to install if you would like me too. By now I’m super comfortable pulling the dash off. The clips Toyota uses are super friendly and it’s really easy to yank on it without fear after you’ve done it a few times. Also don’t let that previous sentence scare you, you only have to unscrew the kick panel and pull off the floorboard door trim piece in order to access the blank switch spots. Really the hardest part is running the trigger wire through the firewall grommet... You definitely need a wire puller and some lubricant to make the job easier.

    I can explain and take pics of where each wire goes if you want to take a crack it. Also if you get the crimp on terminals that have the heat shrink, all you need is a heat gun, small wire stripper, and crimp tool.

    Let me know if you want to take another crack at it and I’d be happy to help you along the way.

    Cheers!

    Edit: it sounds like you already ran the wire and know how to access the blank switches since you installed the Rigid one. It should be pretty easy to walk you through installing the AOB one.
     
    Last edited: Jun 26, 2020
    2A4R[QUOTED] likes this.
  19. Jun 26, 2020 at 12:10 PM
    #9679
    Backwoods

    Backwoods New Member

    Joined:
    Aug 7, 2019
    Member:
    #10814
    Messages:
    436
    Gender:
    Male
    Vehicle:
    2019 silver SR5 4x4

    I bought all my speakers from crutchfield, they include brackets and wire harnesses for free with speakers. They worked great. Lined right up no issues. Stock speakers are still usable... If I actually had a need for them LOL.

    I didn't do the dash tweets. Just the 6 speakers, 4 doors and 2 hatch.

    About an hour... I wasn't timing it and wasn't in a hurry, but I only drank 2 beers during the install... Had it taken an hour and a half I would've at least drank 3 :D
     
    lostenergy[QUOTED], nimby and 7385 like this.
  20. Jun 26, 2020 at 1:11 PM
    #9680
    lostenergy

    lostenergy New Member

    Joined:
    Dec 19, 2018
    Member:
    #8127
    Messages:
    22
    Vehicle:
    2018 TRD Off Road Premium
    Bilstein 5100 shocks Dobinsons C59-314 front coils Total Chaos upper control arms Cornfed 1.5" spacer rear Icon Rebound rims Infinity speakers in all doors 12" JL sub Kustom 54 headlights Morimoto LED Fog Lights Bedliner Valences
    D76671E8-23BF-4F60-86EA-53FC2E4F519A.jpg
    I would have been hammered if I was drinking during my install put a 4 channel under the driver seat and a Lc7i line out converter under passenger.
    Speakers are one of the most enjoyable mods.
     
    Backwoods[QUOTED] likes this.
  21. Jun 26, 2020 at 2:02 PM
    #9681
    2A4R

    2A4R New Member

    Joined:
    Dec 17, 2019
    Member:
    #12363
    Messages:
    239
    Gender:
    Male
    Northern VA
    Vehicle:
    19 4R TRD PRO
    I would definitely appreciate a walk through of the wiring and any expertise you have to offer! It will save me money on having the shop do it. (unfortunately I still intend on bringing my rig to the shop for them to wire my ARB dual compressor which seems like an even more complicated task)

    Would it be easier for you to creat a new thread for this? This way other people would be able to benefit from your knowledge as well?
     
  22. Jun 26, 2020 at 5:47 PM
    #9682
    flyinhoot

    flyinhoot When in doubt, Throttle out.

    Joined:
    Apr 15, 2020
    Member:
    #13871
    Messages:
    718
    Gender:
    Male
    First Name:
    Adam
    Nor Cal
    Vehicle:
    2020 TRD Pro 4Runner "Trudy"
    Monochrome everything. LED reverse lights.
    Threw in a iDrive throttle commander today. Certainly a cool gadget.
     
    7385 and 4 Sticks like this.
  23. Jun 26, 2020 at 6:24 PM
    #9683
    travieb1

    travieb1 New Member

    Joined:
    Mar 25, 2019
    Member:
    #9296
    Messages:
    121
    Gender:
    Male
    First Name:
    Travis
    Seattle
    Vehicle:
    2018 Toyota SR5 premium with 3rd row seating
    2018 SR5 Premium with sunroof and 3rd row seating- tinted windows, debadged side emblems, blacked out rear emblems, AVS low profile Rain Deflectors, AVS Aeroskin 2, Toyota Cargo cover, AJT Design Fob, AJT billet Aluminum red TRD battery bracket, AJT climate control knobs, TRD Skid Plate with Red TRD Inlays, Custom Fuse/Relay Block fabbed from High-Density Polyurethane, Borla Exhaust, N-Fab Nerf Bars, Blue Sea battery meter with additional USB and cigarette lighter with full time power, OEM Audio Plus Reference 500Q System with dual Sub Woofer, Fulltime backup camera mod with AOB switch, Precision LED Full interior LED lighting kit, Xenon Depot HID kit, Diode Dynamics switchback Turn signal LEDs, Precision LED backup LEDs, Diode Dynamics taillight as blinker mod, AJT Customs DRL’s, Toyota “Canadian” 3rd row Cargo mat, Bilstein 5100’s, Toytec 3” lift, JBA Upper Control Arms, Nitto Ridge Grapplers 285/70/17, YodaTEQ Underhood Lighting Kit, TRD hood with flat black hood insert, TRD shift knob, TRD Oil cap, TRD Cold Air Intake, TRD SEMA wheels, Spidertrax spacers, Diode Dynamics SS3 fog-lights, Matte black painted TRD front end, TRD valances front and back painted matte black, Gobi Stealth rack, Gobi ladder, Rotopax with Red Fuel pack, Overland Equipped bolt on step, Kuat bike rack, White Raptor lights with Yoda LED’s switch, Pedal Commander, sequential side mirror blinker LED’s, Bunker Industries Recovery Boards with custom roof mounts, Tepui Awning with Gobi stealth mounts, CVT Mt Shasta Extended Summit Edition RTT, Southern Style Off-road Lo-Pro bumper with 20” Rigid light bar, Accessorides Remote Start.
    D8B8234D-1BA9-4219-B524-56DF08D2B1CE.jpg 5369716D-3B02-44EB-9EBE-42CF9E18F259.jpg 4585F49D-1B88-400A-A34B-D13D74A472EB.jpg
    Good call. Yeah I’ll start one later this weekend... about to leave for a trip to the mountains. Just put my CVT Mt Shasta extended on, along with the Solar powered pressurized shower I made in order to test everything out!! Sooo if you can wait until Sunday evening or even Monday, I would be happy to!! Cheers!
     
    erfer1, Johnrg, Doglover2003 and 8 others like this.
  24. Jun 26, 2020 at 6:33 PM
    #9684
    travieb1

    travieb1 New Member

    Joined:
    Mar 25, 2019
    Member:
    #9296
    Messages:
    121
    Gender:
    Male
    First Name:
    Travis
    Seattle
    Vehicle:
    2018 Toyota SR5 premium with 3rd row seating
    2018 SR5 Premium with sunroof and 3rd row seating- tinted windows, debadged side emblems, blacked out rear emblems, AVS low profile Rain Deflectors, AVS Aeroskin 2, Toyota Cargo cover, AJT Design Fob, AJT billet Aluminum red TRD battery bracket, AJT climate control knobs, TRD Skid Plate with Red TRD Inlays, Custom Fuse/Relay Block fabbed from High-Density Polyurethane, Borla Exhaust, N-Fab Nerf Bars, Blue Sea battery meter with additional USB and cigarette lighter with full time power, OEM Audio Plus Reference 500Q System with dual Sub Woofer, Fulltime backup camera mod with AOB switch, Precision LED Full interior LED lighting kit, Xenon Depot HID kit, Diode Dynamics switchback Turn signal LEDs, Precision LED backup LEDs, Diode Dynamics taillight as blinker mod, AJT Customs DRL’s, Toyota “Canadian” 3rd row Cargo mat, Bilstein 5100’s, Toytec 3” lift, JBA Upper Control Arms, Nitto Ridge Grapplers 285/70/17, YodaTEQ Underhood Lighting Kit, TRD hood with flat black hood insert, TRD shift knob, TRD Oil cap, TRD Cold Air Intake, TRD SEMA wheels, Spidertrax spacers, Diode Dynamics SS3 fog-lights, Matte black painted TRD front end, TRD valances front and back painted matte black, Gobi Stealth rack, Gobi ladder, Rotopax with Red Fuel pack, Overland Equipped bolt on step, Kuat bike rack, White Raptor lights with Yoda LED’s switch, Pedal Commander, sequential side mirror blinker LED’s, Bunker Industries Recovery Boards with custom roof mounts, Tepui Awning with Gobi stealth mounts, CVT Mt Shasta Extended Summit Edition RTT, Southern Style Off-road Lo-Pro bumper with 20” Rigid light bar, Accessorides Remote Start.
    Also ARB air compressor sounds rad. Are you mounting it driver side next to the fuse box? I’m doing one eventually...
     
    2A4R[QUOTED] likes this.
  25. Jun 26, 2020 at 7:16 PM
    #9685
    2A4R

    2A4R New Member

    Joined:
    Dec 17, 2019
    Member:
    #12363
    Messages:
    239
    Gender:
    Male
    Northern VA
    Vehicle:
    19 4R TRD PRO
    Your rig looks great! And no worries man, no rush at all. You're doing us the favor!

    The compressor is actually mounted on the passenger side. With my mount, you can actually fit a 1gallon air tank under the compressor which I plan on adding in the future.

    Check out the link below to the other 4runner site for guy makes mounts. I bought mine from @8S6RUNNER Who got his though the below link. Mounts perfectly in my 2019 and is cheaper than any other mount I've found.
     
    8S6RUNNER and travieb1[QUOTED] like this.
  26. Jun 26, 2020 at 7:38 PM
    #9686
    travieb1

    travieb1 New Member

    Joined:
    Mar 25, 2019
    Member:
    #9296
    Messages:
    121
    Gender:
    Male
    First Name:
    Travis
    Seattle
    Vehicle:
    2018 Toyota SR5 premium with 3rd row seating
    2018 SR5 Premium with sunroof and 3rd row seating- tinted windows, debadged side emblems, blacked out rear emblems, AVS low profile Rain Deflectors, AVS Aeroskin 2, Toyota Cargo cover, AJT Design Fob, AJT billet Aluminum red TRD battery bracket, AJT climate control knobs, TRD Skid Plate with Red TRD Inlays, Custom Fuse/Relay Block fabbed from High-Density Polyurethane, Borla Exhaust, N-Fab Nerf Bars, Blue Sea battery meter with additional USB and cigarette lighter with full time power, OEM Audio Plus Reference 500Q System with dual Sub Woofer, Fulltime backup camera mod with AOB switch, Precision LED Full interior LED lighting kit, Xenon Depot HID kit, Diode Dynamics switchback Turn signal LEDs, Precision LED backup LEDs, Diode Dynamics taillight as blinker mod, AJT Customs DRL’s, Toyota “Canadian” 3rd row Cargo mat, Bilstein 5100’s, Toytec 3” lift, JBA Upper Control Arms, Nitto Ridge Grapplers 285/70/17, YodaTEQ Underhood Lighting Kit, TRD hood with flat black hood insert, TRD shift knob, TRD Oil cap, TRD Cold Air Intake, TRD SEMA wheels, Spidertrax spacers, Diode Dynamics SS3 fog-lights, Matte black painted TRD front end, TRD valances front and back painted matte black, Gobi Stealth rack, Gobi ladder, Rotopax with Red Fuel pack, Overland Equipped bolt on step, Kuat bike rack, White Raptor lights with Yoda LED’s switch, Pedal Commander, sequential side mirror blinker LED’s, Bunker Industries Recovery Boards with custom roof mounts, Tepui Awning with Gobi stealth mounts, CVT Mt Shasta Extended Summit Edition RTT, Southern Style Off-road Lo-Pro bumper with 20” Rigid light bar, Accessorides Remote Start.
    Sicckkkk bro.. I’m going to do that sometime.. thanks for the link. Next mod is dual battery setup... getting the Shockwerks tray So looks like that will be perfect for what I’m looking for as well. Going to put in a rear air locker eventually since I have the SR5.. wish I would have bought the Off-road, but I needed a ride right away since my Audi went kaput and needed to get one right away -didn’t do the right research.. but kind of glad I did, since It’s been so much fun working on it and upgrading and learning the ins and outs of it. I plan on having it for a long while and having many adventures with it!!
     
  27. Jun 26, 2020 at 8:02 PM
    #9687
    SLoTH_XVX

    SLoTH_XVX New Member

    Joined:
    Jun 21, 2018
    Member:
    #6311
    Messages:
    231
    Gender:
    Male
    First Name:
    Kevin
    Vehicle:
    2015 4Runner SR5 Premium White
    6" Fabtec Suspension Lift 35x12.5 Fuel Gripper M/T Tires 18" Fuel - Vapor Wheels
    This site contains affiliate links for which the site may be compensated.
  28. Jun 27, 2020 at 4:05 AM
    #9688
    2A4R

    2A4R New Member

    Joined:
    Dec 17, 2019
    Member:
    #12363
    Messages:
    239
    Gender:
    Male
    Northern VA
    Vehicle:
    19 4R TRD PRO
    Good! I'm glad it'll work out for you. The mount is really nice, you'd never know it didn't come from a factory. The instructions are hand written , but very easy to follow.
    And that really is the way to go, you saved so much money and now you can make your rig how YOU want it.
     
    travieb1[QUOTED] likes this.
  29. Jun 27, 2020 at 6:59 AM
    #9689
    A&P

    A&P Name: Kevin

    Joined:
    May 13, 2020
    Member:
    #14275
    Messages:
    115
    Gender:
    Male
    E.Pa
    Vehicle:
    2018 TRD OR Super White Some Mods Eibach Frt @0.85, Cooper Discoverer S/T MAXX 275/70/17
    LED Anytime Fog Lights, Interior & Backup, Raptor lights,H9 Lo-Beams Tinted Frt to match rest windows, CF steering wheel, 4 doors & above glove box panels, Eibach Frt @0.85, Cooper Discoverer S/T MAXX 275/70/17
    Got oil filter wrench, Aluminum Filter Bowl filter,filter from Amazon. Need to go to Wally world & get oil, 1st for me since new close to 20k. Probably next weekend I'll change oil. Off to Advance Auto to get new drain plug gasket I ordered last weekend.
     
    Last edited: Jun 27, 2020
    nimby likes this.
  30. Jun 27, 2020 at 8:51 AM
    #9690
    replica9000

    replica9000 New Member

    Joined:
    Sep 7, 2019
    Member:
    #11179
    Messages:
    524
    First Name:
    Jason
    New Vertiform City
    Vehicle:
    2019 TRD OR Premium
    Dobinsons 2.5" lift. Cooper AT3 XLT 295/70R17.
    What needs to be disconnected when removing the seats? Airbags and seatbelt sensors?
     

Products Discussed in

To Top