1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

17x9 -38 on Stock Pro

Discussion in '5th Gen 4Runners (2010-2024)' started by ILBEATU, Sep 30, 2019.

  1. Sep 30, 2019 at 4:02 PM
    #1
    ILBEATU

    ILBEATU [OP] New Member

    Joined:
    Sep 15, 2019
    Member:
    #11287
    Messages:
    14
    I have a set of 17x9 -38 SCS Ray 10s. I would like to put them on a stock 19 pro with the stock tires. Any idea if they will rub?
     
  2. Oct 3, 2019 at 8:04 PM
    #2
    Encardyle911

    Encardyle911 New Member

    Joined:
    Oct 3, 2019
    Member:
    #11537
    Messages:
    2
    Gender:
    Male
    First Name:
    Fahd
    Vehicle:
    5th gen 4runner
    Will rub big time With that negative offset your looking beyond BMC
     
  3. Dec 25, 2019 at 12:06 PM
    #3
    Louisiana Overland

    Louisiana Overland New Member

    Joined:
    Aug 7, 2018
    Member:
    #6645
    Messages:
    6
    Gender:
    Male
    Vehicle:
    2017 TRD ORP
    OME 3”, SPC UCA, BFG 285/70, Odessey 34R, Dometic CFX50, CVT RTT, SSO full length roof rack, JLAudio, Audison Bit 10, Focal
    Yep... body mount chop for sure. Plus a lot of trimming.

    I have same sized scs wheels. I run 285s on 3” lift with aftermarket upper control arms. I did body mount chop. Tossed the front mud flap and did some aggressive trimming on front bumper/fenders and wheel liner. You might get away with a -10 8.5” wheel.
     

Products Discussed in

To Top