1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

1985 Toyota 4 Runner "Roof Tent"

Discussion in '1st Gen 4Runners (1984-1989)' started by NightOwl, Sep 7, 2019.

  1. Sep 7, 2019 at 12:09 PM
    #1
    NightOwl

    NightOwl [OP] 1985 Toyota 4 Runner DLX 22REC

    Joined:
    Aug 29, 2019
    Member:
    #11070
    Messages:
    179
    Gender:
    Male
    First Name:
    Amos
    Ballwin, MO
    Vehicle:
    1985 Toyota 4 Runner DLX
    LCE header, 2.5 inch exhaust, 31x 10.50 BF Goodrich, 15 X 8 aluminum wheels, Bilstein Shocks, 3 inch lift kit, 3M fender flares
    I have been investigating Roof Tents for my 85 4 Runner...I have no roof rack and of course the fiberglass top has no mounting points for anything...has anyone ever put a Roof Tent on their fiberglass top and how did you do it?
    Thanks for any help or thoughts...
     
  2. Sep 7, 2019 at 12:28 PM
    #2
    4scooter19

    4scooter19 New Member

    Joined:
    Feb 23, 2019
    Member:
    #8920
    Messages:
    1,323
    Gender:
    Male
    Oregon
    Vehicle:
    98 and 86 4Runners
    I have thought of this too and this is what I came up with. I worked as a fabricator for years and have made quite a few lumber racks for pickups and a few with canopies. I would essentially build a lumber rack that mounted to the bedrails under the top. You would probably have to come up with a new seal for your top though. Another option would be kind of like an exo cage. If you had rock sliders you could run hoops over the top that either tie into your sliders or frame and then mount your tent to said hoops. That's just what I have brainstormed
     
    Last edited: Sep 7, 2019
  3. Sep 7, 2019 at 12:31 PM
    #3
    4scooter19

    4scooter19 New Member

    Joined:
    Feb 23, 2019
    Member:
    #8920
    Messages:
    1,323
    Gender:
    Male
    Oregon
    Vehicle:
    98 and 86 4Runners
    New Bitmap Image (2).jpgsomething like this
     
    gunsnob and WallyT4R like this.
  4. Sep 7, 2019 at 12:44 PM
    #4
    NightOwl

    NightOwl [OP] 1985 Toyota 4 Runner DLX 22REC

    Joined:
    Aug 29, 2019
    Member:
    #11070
    Messages:
    179
    Gender:
    Male
    First Name:
    Amos
    Ballwin, MO
    Vehicle:
    1985 Toyota 4 Runner DLX
    LCE header, 2.5 inch exhaust, 31x 10.50 BF Goodrich, 15 X 8 aluminum wheels, Bilstein Shocks, 3 inch lift kit, 3M fender flares
    Hey 4Scooter19...thanks for the quick reply...that looks really good!!! I can see your a creative guy! I like the way you have it attached to the sides instead of putting holes in fiberglass top...that was my big concern. I'll do some brain storming on your design but it appeals to me
     
  5. Sep 7, 2019 at 12:50 PM
    #5
    4scooter19

    4scooter19 New Member

    Joined:
    Feb 23, 2019
    Member:
    #8920
    Messages:
    1,323
    Gender:
    Male
    Oregon
    Vehicle:
    98 and 86 4Runners
    Thanks man. I did not build the one in the photo I shared, just a pic to show an example of a possible way to do it. In the pic I don't think there are holes. I think those are tabs welded to probably a piece of flat bar that runs the length of the bedrails.
     
To Top