1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Anyone have a rock crawler or solid axle 5th gen 4runner?

Discussion in '5th Gen 4Runners (2010-2024)' started by 4runner5genquestion, Aug 10, 2019.

  1. Aug 10, 2019 at 6:12 PM
    #1
    4runner5genquestion

    4runner5genquestion [OP] New Member

    Joined:
    Aug 10, 2019
    Member:
    #10850
    Messages:
    1
    Hi everyone,

    New to the area, and was hoping someone could help.

    I've been back and forth between a used 5th gen 4Runner and a JL Rubicon. The only thing leaning me right now a bit towards a Jeep is that it feels more like a truck in how it drives. So here's the ask:

    Has anyone in the general Bay Area built a serious off-roader/rock crawler out of their 5th gen? Or even done a solid axle swap?

    If so, I'd love to chat with you about the build and maybe even meetup to check it out.

    Hope to hear from any of you.
     
    Last edited: Aug 10, 2019
    SandyTaco4x4 and Han4Run like this.
  2. Dec 21, 2019 at 7:53 AM
    #2
    Agent_Outside

    Agent_Outside A Guy A Girl and A Trail

    Joined:
    Dec 18, 2018
    Member:
    #8098
    Messages:
    1,951
    Colorado
    Vehicle:
    Built 2011 T4R Limited
    If you’re going for a purpose built rock crawler go with the Jeep, if you’re using it for literally anything else go with the T4R.
     
  3. Dec 21, 2019 at 6:59 PM
    #3
    rkwfxd

    rkwfxd New Member

    Joined:
    Mar 14, 2018
    Member:
    #5662
    Messages:
    642
    Gender:
    Male
    First Name:
    Rich
    Whittier - So Cal
    RSG in Colorado has a SAS 5th Gen.
     
    SlvrSlug likes this.
  4. Dec 21, 2019 at 8:05 PM
    #4
    SandyTaco4x4

    SandyTaco4x4 New Member

    Joined:
    Jun 30, 2019
    Member:
    #10407
    Messages:
    15
    Gender:
    Male
    Found this q50t2mgftu6z.jpg IMG_9412.jpg

    All though I hear the prius gets better mileage


    prius.jpg
     
    djwantke, Tank010, icebear and 4 others like this.
  5. Dec 21, 2019 at 8:24 PM
    #5
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,614
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
  6. Jan 16, 2024 at 10:47 PM
    #6
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    2,783
    Olympia, WA
    Haha
     
  7. Jan 16, 2024 at 10:54 PM
    #7
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    2,122
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    The Jeep is better at the rock stuff than the Runner out of the box. A SFA done at a shop will easily run you $10K+.
     
    djwantke and Yotaholic like this.
  8. Jan 16, 2024 at 11:00 PM
    #8
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    2,783
    Olympia, WA
    I think $20K+
     
  9. Jan 16, 2024 at 11:34 PM
    #9
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    2,122
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    I met someone that paid $19K to convert his prerunner Tacoma to 4wd. I don’t remember if it was SASd too but I don’t think so.
     
    Yotaholic[QUOTED] likes this.
  10. Jan 17, 2024 at 7:21 AM
    #10
    GrimJeeper91

    GrimJeeper91 New Member

    Joined:
    Nov 22, 2023
    Member:
    #36855
    Messages:
    192
    Gender:
    Male
    First Name:
    Terry
    SoCal
    Vehicle:
    2024 TRD Off-Road
    Yokohama AT's, Bilstein 5100's, Talon's Garage full skids.
    Jeep is a better choice if you really want to rock crawl.
     
  11. Jan 17, 2024 at 9:59 AM
    #11
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    2,666
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock
    Even if you SAS the 4R, the Jeep is still going to have much better approach/departure angles, as well as much better gearing with the Rubicons 4:1 low range. You'd have to add a Marlin crawler box to your budget to get that.

    Wrangler body shape is also much less susceptible to body damage.

    Jeep is just the better rock crawler, period. It's all about the right tool for the job.
     
    Newfy, djwantke, Yotaholic and 5 others like this.
  12. Jan 17, 2024 at 10:27 AM
    #12
    ID_Yeti

    ID_Yeti New Member

    Joined:
    Nov 29, 2023
    Member:
    #36976
    Messages:
    54
    Gender:
    Male
    Vehicle:
    2024 ORP
    Holy shit that's my buddy's old rig that's been photo shopped with the Prius. This was on Middle St. Vrain in Colorado.

    Original photo. Screenshot_20240117-112508.png
     
    Yotaholic and Rob41 like this.
  13. Jan 17, 2024 at 12:06 PM
    #13
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    2,783
    Olympia, WA
    You will flush big $$$ down the toilet if you do that to the 5th gen. It is a great truck, don't ruin it, enjoy it as it is. Our 5th gens are too long. For rock crawling, get this oldie, throw Dana 60s and 42s in there and have fun.

    20240117_120321.jpg
     
  14. Jan 17, 2024 at 12:50 PM
    #14
    nova

    nova New Member

    Joined:
    Aug 26, 2022
    Member:
    #28359
    Messages:
    464
    Gender:
    Male
    First Name:
    mike
    Soon Arizona
    Vehicle:
    slightly modified LE
    I’ve seen some interesting builds based on the MC RCLT. Not a SAS, but looks like it could check a lot of boxes. As stated, a Jeep is much easier to convert to rock crawling.

    Tempting though :turtleride:
     
    Trail Runnah and Yotaholic like this.
  15. Jan 17, 2024 at 4:00 PM
    #15
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    2,783
    Olympia, WA
  16. Jan 17, 2024 at 4:17 PM
    #16
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    2,666
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock
    Nate from "Dirt Lifestyle" on YouTube did a great build of a Taco with the Marlin suspension. He's actually talking about putting portals on it now, should be epic.
     
  17. Jan 17, 2024 at 4:30 PM
    #17
    nova

    nova New Member

    Joined:
    Aug 26, 2022
    Member:
    #28359
    Messages:
    464
    Gender:
    Male
    First Name:
    mike
    Soon Arizona
    Vehicle:
    slightly modified LE
    Yeah I’ve seen portals too. 74Weld was at a show I attended last July. It’s cool but it doesn’t include lockers (but neither does RCLT) nor addresses the steering or brakes.

    So if I had deep pockets, I’d still be leaning towards MC because for the cost of portals I can get more done fixing up the other downsides of huge tires and stresses related to rock crawling in general.

    Of course, for the cost of portals, go get that Jeep!
     
  18. Jan 17, 2024 at 4:41 PM
    #18
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    2,783
    Olympia, WA
    Nothing wrong in some rock crawling with all your crap in the back

    FB_IMG_1702969630007.jpg
     
  19. Jan 17, 2024 at 4:42 PM
    #19
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,775
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    4R's get you the hotter chicks tho :hattip:
     
    Yotaholic likes this.
  20. Jan 17, 2024 at 4:45 PM
    #20
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    2,783
    Olympia, WA
    Hard to beat that look. And a full mattress can fit in the back, just saying
    moprerunner1zoomweb_1000x (1).jpg
     
    MEski4x4 and djwantke[QUOTED] like this.
  21. Jan 17, 2024 at 5:00 PM
    #21
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,775
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Hey isn't that 4R dude on this website I recall
    Stunning
    ..Or the guy I'm thinking of has a similar build!
     
    Yotaholic likes this.
  22. Jan 17, 2024 at 5:03 PM
    #22
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    2,783
    Olympia, WA
    I got it from Backwpods Adventure website
     
  23. Jan 17, 2024 at 5:44 PM
    #23
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    2,666
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock
    The only people impressed by modded Toyotas are dudes, lol.
     
  24. Jan 17, 2024 at 5:57 PM
    #24
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,775
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    That does seem to be reality doesn't it
     
    Trail Runnah[QUOTED] likes this.
  25. Jan 17, 2024 at 6:27 PM
    #25
    runnerjimmy

    runnerjimmy Wannabe

    Joined:
    Sep 26, 2021
    Member:
    #23530
    Messages:
    1,274
    Gender:
    Male
    First Name:
    Jim
    Scottsdale Az. Castle Rock Co.
    Vehicle:
    2021 ORP Barcelona red
    Fox 2.5 DSC. 2 1/2” front, 2”rear. Falken Wildpeak 255/80/17

Products Discussed in

To Top