Looks good. Rubber pad behind light eliminates rattle.
Easy install provided you know how to add a reverse wire. I do. If you have a standard 4 pin trailer plug already installed then that part is plug and play. Need to connect the hitch light backup wire to a back up light wire, and add a plug for that wire to remove the hitch light.. Butt of you don't, the tail brake turn functions still work. Or for one pl;ug only you could convert ther hitch light to a five pin connector and wire a five pin plug in parallel to the four pin on the vehicle plus a reverse connection to fifth pin. Reverse wire does to require a ground wire because it uses the ground wire in the four pin connector.
Functions of hitch light might not be exactly as you would expect but no actual problems.
Reverse light on turns off all red light functions.
Except when in reverse,
tail light matches vehicle tail lights
brake light matches vehicle brake lights.
The hitch light blinks its flash/brake light with left and right turn signals. surprising but OK.
Hitch light blinks with 4 way flashers, but differently depending on tail lights.
with tail lights on the hitch flasher matches vehicle flashers.
with tail lights off the hitch light blinks at same rate as vehicle but the flashes are short -almost a strobe effect.
I'd buy another for different vehicle if there was a 1.25 inch hitch version.
| Manufacturer | TC Sportline |
|---|---|
| Brand | TC Sportline |
| Item Weight | 8.1 ounces |
| Product Dimensions | 5 x 3 x 3 inches |
| Manufacturer Part Number | TR-RR21001 |
| Bulb Type | LED |
