Other Sellers on Amazon
Sun Company 201-F Lev-o-gage Inclinometer | USA-Made Level Gauge for Off-Road Vehicle, Jeep, Truck, RV, Camper, Trailer, or Boat
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Purchase options and add-ons
Brand | Sun Company |
Material | Brass |
Item Dimensions LxWxH | 3.5 x 0.3 x 1.5 inches |
Item Weight | 1.09 ounces |
About this item
- THE ORIGINAL INCLINOMETER - Since 1971, Lev-o-gage has been the industry leader in durable, high-visibility inclinometer levels. One of the must-have accessories for offroad 4x4 vehicles, ATV's, trucks, travel trailers, boats, tractor, and anything else that tilts.
- EASY TO READ DISPLAY - Monitors tilt from -45 to 45 degrees with high-visibility brass ball and bright Saturn yellow tube assembly. Engraved and hand painted numbers make for a functional, easy-to-read clinometer.
- SHATTERPROOF DESIGN - Tube assembly is made out of a rugged copolymer "flex tube" for ultimate durability. Brass ball rides in special damping fluid for smooth, accurate readings.
- MOUNTS WITH 3M VHB TAPE - Lev-o-gage includes a piece of 3M VHB (Very-High Bond) tape on the back for easy mounting. Can be mounted on the inside or outside of vehicle for easy leveling.
- MADE IN USA - From the highest quality materials. Safely and accurately measure angle or slope in a variety of applications.
Additional Details
Customers usually keep this item
This product has fewer returns than average compared to similar products.
Frequently bought together
Similar items that may ship from close to you
- Sun Company Lev-o-gage II - RV Levels (2-Pack) - Made in USA | Leveling System for RV, Camper, or Pop Up Trailer | High Visibility Ball Level (No Bubble)Amazon's Choicein RV LevelersFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Sunday, Mar 31
- Sun Company Lev-o-gage 8 - Heel Angle Clinometer | High-Resolution Clinometer for Modern Boats | Mounts on BulkheadFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Sunday, Mar 31
- Sun Company AltiTilt - Dashboard Altimeter Inclinometer for Off-Road Vehicles | Read Altitude, Barometric Pressure, and TiltAmazon's Choicein Automotive CompassesFREE Shipping by AmazonGet it as soon as Sunday, Mar 31
- huangyunming - RV Levels (2-Pack) - No Bubble- Leveling System for RV, Camper, or Pop Up Trailer | High Visibility Ball LevelFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Sunday, Mar 31
- MR CARTOOL M60 Car Inclinometer Digital GPS HUD Pitch Angle Slope Meter MPH Speedometer with Compass for Off-Road SUV VehiclesFREE Shipping by AmazonGet it as soon as Sunday, Mar 31
- Sun Company AvaGage - Avalanche Danger Indicator | Skiing and Snowboarding Slope Meter | Trail InclinometerAmazon's Choicein Backcountry Snow ProbesFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Sunday, Mar 31
Product details
- Is Discontinued By Manufacturer : No
- Product Dimensions : 3.5 x 0.3 x 1.5 inches; 1.09 ounces
- Item model number : 201-F
- Date First Available : May 4, 2005
- Manufacturer : Sun Company
- ASIN : B00042K694
- Best Sellers Rank: #15,371 in Automotive (See Top 100 in Automotive)
- Customer Reviews:
Product Description
Reliability and Safety
These two ideals are what drove the creation of Lev-o-gage almost 50 years ago. Whether you're leveling a recreational vehicle or hitting the trails in your favorite rig, Lev-o-gage has your back.
If it tilts, we're on it.
|
|
|
|
---|---|---|---|
IDEAL TILT READINGMonitors tilt from -45 to +45 degrees. Brass ball rides in special damping fluid for smooth, accurate readings. |
EASY TO READ DISPLAYBrass ball instead of bubble included in bright Saturn yellow tube assembly. Engraved and hand-painted numbers make for a functional, easy-to-read display. |
SHATTERPROOF DESIGNTube assembly is made out of a rugged co-polymer "flex tube" for ultimate durability. Housing is constructed of durable ABS plastic. |
MOUNTS WITH 3M VHB TAPELev-o-gage includes a piece of 3M VHB (Very-High Bond) tape on the back for easy mounting. |
- Convenient size: Lev-o-gage can mount on almost any surface.
- Lightweight and highly visible, it works flawlessly both indoors and out.
Made in USA
100% Made in the USA since 1971. Fully assembled and painted by hand, one unit at a time.
About Sun Company
Since 1971, Sun Company has been family-owned and operated with the goal of making the outdoors safer, and more fun. For nearly 50 years, we have been designing and crafting "simply intelligent" products for outdoor lovers of all ages at our facility in Colorado. We hope you enjoy our products as much as we do and we look forward to welcoming you to our family!
Looking for specific info?
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers like the performance, ease of installation, readability, accuracy, and quality of the electromechanical gauge. For example, they mention that it works great, it's easy to mount, and it'll last forever. That said, some say it'd be a great addition to any boat or vehicle.
AI-generated from the text of customer reviews
Customers are satisfied with the performance of the gauge. They mention that it works great, is inexpensive, and can always be counted on to work. Some say that it's a really neat gadget and of good quality.
"Works just as it should. And, should last a long time. It is fairly large, and the bubble is very easy to read." Read more
"...Worked great." Read more
"...Even after many hours sub-freezing, it worked fine, except maybe that the fluid got more viscous...." Read more
"This works great however longevity is questionable as I had an older one that seemed to not work after a few years. This is a replacement for it." Read more
Customers find the installation of the electromechanical gauge to be easy. They mention that the instructions are simple, the double-sided tape provided easy installation, and the product is reliable. Some say that the product can be mounted anywhere in the vehicle and that it's a cheap and easy fix to a medical need.
"Easy to install, easy to read and provides accurate roll angle readings...." Read more
"Very easy to use and install. Pick a place and remove backing to attach. Hardest part is to make sure it is level when attaching." Read more
"...It was easy to mount. The gauge is not particularly precise - only goes to the nearest 5 degrees - but good enough for a tractor...." Read more
"...At least not that I could find.So, it is a good level...." Read more
Customers find the readability of the electromechanical gauge to be easy. They say it is easy to mount and read at a glance. They also say the bubble is very easy to read, and the reading is accurate even in waves or bumpy motion. The bright colors make it easy to view and use, and it contains no adhesive to stick it to something.
"...And, should last a long time. It is fairly large, and the bubble is very easy to read." Read more
"Easy to view and use, but contains no adhesive to stick it to something, so buy double-sided tape to mount it to something...." Read more
"Easy to install, easy to read and provides accurate roll angle readings...." Read more
"...This fit the bill perfectly. Large enough to read, small enough not to be in the way." Read more
Customers like the accuracy of the electromechanical gauge. They say it's reasonable, precise, and easy to read. Some customers also say it provides accurate roll angle readings within about two degrees. Overall, most are satisfied with the product's accuracy.
"Easy to install, easy to read and provides accurate roll angle readings...." Read more
"Nice goodclassic accurate." Read more
"Accurate enough for a sailboat to control the heel" Read more
"...It was easy to mount. The gauge is not particularly precise - only goes to the nearest 5 degrees - but good enough for a tractor...." Read more
Customers like the quality of the electromechanical gauge. They mention it's well-made, reliable, and stable. Some say that it does not give the impression of cheap plastic. Overall, customers are satisfied with the quality and functionality of the product.
"Works just as it should. And, should last a long time. It is fairly large, and the bubble is very easy to read." Read more
"...The plastic body (two pieces of plastic held together) is solid enough and hollow enough that it will probably tolerate a screw or two or more,..." Read more
"This is well made and will give a good ball park estimate of the level. If you need a precision measurement this is not the level for you." Read more
"...The adhesion seems to be adequate enough. It has lasted for a couple of months of typical tractor use..." Read more
Customers like the stickiness of the electromechanical gauge. They say it is easy to read, has a functional foam tape adhesive, and can be stuck on most surfaces. Some customers also mention that it holds well and sticks on incline.
"...The adhesion seems to be adequate enough...." Read more
"...The gauge is easy to read and the adhesive is super strong. My tractor sits out in the weather and I have had no problems...." Read more
"Easy to view and use, but contains no adhesive to stick it to something, so buy double-sided tape to mount it to something...." Read more
"...Sticks just fine and is legible with a quick glance." Read more
Customers like the value of the product. They mention that it is a great value for the money, has great quality for the price, and is inexpensive.
"...helpful and virtually fool-proof add-on for off-road travel at an affordable price." Read more
"Thanks for the fast shipping and great price." Read more
"...These are inexpensive and can always be counted on to work, they help keep me safe and headed in the right direction whether working or playing." Read more
"...It's larger and heavier, however, and more expensive, so I might take my chances with the Sun Company version...." Read more
Customers are mixed about the size of the electromechanical gauge. Some mention that the size is perfect, it takes up little room, and is perfect for a small sailing vessel. However, others say that it's rather small, too small to comfortably read from the helm, and has coarser measuring than expected.
"Works just as it should. And, should last a long time. It is fairly large, and the bubble is very easy to read." Read more
"...The scale is not fine enough. My fault for not knowing...." Read more
"...This fit the bill perfectly. Large enough to read, small enough not to be in the way." Read more
"...The ball bearing suspended in liquid moves quick enough and it is pretty small, 3.5" at the widest point, so I think it should fit nicely on my dash...." Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Used it in my Rover for off-roading so I could know when I was getting close to the danger zone for tipping over. Worked great.
I am considering returning it, however, because there is a chance that I would land on the plastic tube, break it, and spill the oil all over my pocket. I will probably switch to the Brooks-Range version, http://www.amazon.com/gp/product/B0060C3X5Q , since the tube is enclosed in that one. It's larger and heavier, however, and more expensive, so I might take my chances with the Sun Company version. At worst, I'll have to get a new coat, which, you know, is not the end of the world.
I haven't tried the adhesive, which is on the rear side of the gauge. It's meant to be stuck on a vertical surface. You will need a level to independently measure the incline of the car before placing this device. If you have a truly vertical surface, you can use this to measure pitch or roll. The plastic body (two pieces of plastic held together) is solid enough and hollow enough that it will probably tolerate a screw or two or more, which is what I'll be using.