1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Changing Differential and Transfer Oil on 5th Generation

Discussion in '5th Gen 4Runners (2010-2024)' started by cthomas31, Mar 16, 2019.

  1. Mar 16, 2019 at 4:17 AM
    #1
    cthomas31

    cthomas31 [OP] New Member

    Joined:
    Mar 16, 2019
    Member:
    #9189
    Messages:
    2
    Gender:
    Male
    I wanted to make a post specifically for 5th generation diff and transfer case oil change. Hope this helps!

    Tools you will need:

    Torque Wrench (1/2 inch)
    Socket wrench
    24 mm socket
    10 mm hex bit
    10 mm socket
    oil pan
    oil pump: https://www.amazon.com/gp/product/B000BQW5LK/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
    PB blaster

    Parts you will need:
    Differential and Transfer Case Oil. You can use OEM or a good synthetic. I used Mobil 1 75w-90 LS and it worked great.
    If you aren't comfortable using aftermarket, you can buy the OEM oil, but in my opinion, they are overpriced.

    Crush washer replacements:
    12157-10010 TAKES QTY 3 TWO FOR REAR DIFFERENTIAL AND 1 FOR FRONT DIFFERENTIAL
    90430-24003 TAKES QTY 1 FOR FRONT DIFFERENTIAL
    90430-A0003 TAKES QTY 2 TRANSFER CASE

    Do NOT reuse the original crush washers. They must be replaced with every oil change or you will experience leaks. Here's a kit that I found on Amazon: https://www.amazon.com/gp/product/B017V4BAXI/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

    BEFORE YOU GET STARTED:
    Spray all the bolts with PB blaster before you remove them. I did this and waited about an hour before I removed them. Some people like to wait overnight which is preferred, but I didn't want to wait that long.

    Make sure your vehicle is on level ground or you will not be able to fill oil to appropriate volume.

    HOW TO REPLACE YOUR OIL
    Front Differential
    Step 1: Remove skid plate using a 12 mm socket . There are 4 bolts that you will have to remove to access the front differential.

    Step 2: Remove the FILL bolt using the 10 mm hex bit. Always remove the fill bolt first. If you remove the drain bolt, and then can't get the fill bolt off, you won't have any way to refill the oil.

    Step 3: Remove Drain bolt using the 10 mm hex bit.

    Step 4: allow time to fully drain. I pumped some extra oil through the system to remove any excess sludge, old oil, etc.

    Step 5: Clean drain bolt, replace crush washer, and tighten to 48 ftlbs

    Step 6: Add the new oil using the oil pump. Front diff calls for 1.2 quarts, but the oil will start to flow out of the fill hole when it is full.

    Step 7: Clean fill bolt, replace crush washer, and tighten to 29 ftlbs

    Rear Differential
    Step 1: Remove the FILL bolt using the 24 mm socket.

    Step 2: Remove Drain bolt using the 24 mm socket.

    Step 3: allow time to fully drain.

    Step 4: Clean drain bolt, replace crush washer, and tighten to 36 ftlbs

    Step 5: add the new oil. Rear diff calls for 2.6 quarts.

    Step 6: Clean fill bolt, replace crush washer, and tighten to 36 ftlbs

    Transfer Case
    Step 1: Remove the FILL bolt using the 24 mm socket.

    Step 2: Remove Drain bolt using the 24 mm socket.

    Step 3: allow time to fully drain.

    Step 4: Clean drain bolt, replace crush washer, and tighten to 27ftlbs

    Step 5: add the new oil. Rear diff calls for 1.1 quarts.

    Step 6: Clean fill bolt, replace crush washer, and tighten to 27ftlbs


    Overall, this is a pretty easy task as long as you buy all the parts first and have a good plan going in. It took me about 2 hours in total...pumping the oil is the longest part of the process.
     
  2. Mar 16, 2019 at 5:12 AM
    #2
    kbp810

    kbp810 rebmem wen

    Joined:
    Feb 24, 2019
    Member:
    #8935
    Messages:
    616
    Gender:
    Male
    Nice write up! For what it's worth, if you have an amsoil dealer nearby, they make gear oil in bags that is significantly quicker, easier, and less messy than using a pump. Just point and squeeze.

    Amsoil.jpg
     
    BrokenVet, diverdon, Jmb0351 and 10 others like this.
  3. Mar 16, 2019 at 5:26 AM
    #3
    cthomas31

    cthomas31 [OP] New Member

    Joined:
    Mar 16, 2019
    Member:
    #9189
    Messages:
    2
    Gender:
    Male
    Thanks for the info! I'll remember that for next time. Pumping is a pain in the a**
     
    SandyTaco4x4, WallyT4R and kbp810 like this.
  4. Mar 16, 2019 at 6:20 AM
    #4
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    2,443
    Yeah that is really cool! Thanks for that.
     
    kbp810[QUOTED] likes this.
  5. Mar 16, 2019 at 7:47 AM
    #5
    j cat

    j cat New Member

    Joined:
    Jun 28, 2016
    Member:
    #2223
    Messages:
    854
    massachusetts
    spacer lift front 1inch
    toyota transfer case fluid.jpg on your use of mobil synthetic gear oil in the transfer case IMO not the proper fluid. this is the transfer case fluid new unused. see the special additives in this toyota transfer case fluid ..

    mobil synthetic 75-90 does not have these additives this can cause bearing and other damage .. also may cause delayed engagement.. 30-40K miles is the recommended change.
     
    WallyT4R likes this.
  6. Mar 28, 2019 at 8:30 PM
    #6
    zwniana

    zwniana New Member

    Joined:
    Mar 15, 2019
    Member:
    #9187
    Messages:
    14
    Gender:
    Male
    When do I change the differential and transfer oil
     
  7. Mar 29, 2019 at 4:10 AM
    #7
    DGP1961

    DGP1961 New Member

    Joined:
    Sep 17, 2018
    Member:
    #7154
    Messages:
    983
    Gender:
    Male
    Vehicle:
    2018 SR5 Premium
    Assuming you have a new or newer vehicle read your manual in the service interval section. Many people on this site have done it at around 3,000 miles and swear it's needed that soon. In my opinion (and only my opinion) that's way over-kill but hey to each his own! If your that concerned about doing it read the manual and move in Toyota's recommendation by 10,000 miles.
     
    WallyT4R likes this.
  8. Mar 29, 2019 at 4:16 AM
    #8
    DGP1961

    DGP1961 New Member

    Joined:
    Sep 17, 2018
    Member:
    #7154
    Messages:
    983
    Gender:
    Male
    Vehicle:
    2018 SR5 Premium
    OP......Thanks excellent write up I was going to try my own when ready, I'll follow these steps and maybe even buy the washer kit and pump you show. I'm going to get the fluid(s) from Toyota so I'll need the pump. I really like the suggestion about removing the filler plug first some people may not think to do that. Mind if I make one small suggestion?? How about driving the vehicle first and warm up the fluids to aid in ease of draining? ;)
     
  9. Mar 29, 2019 at 6:03 AM
    #9
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    2,443
    Don't forget new washers for the drain and fill plugs when you get the oil.
     
  10. Mar 29, 2019 at 8:05 AM
    #10
    DGP1961

    DGP1961 New Member

    Joined:
    Sep 17, 2018
    Member:
    #7154
    Messages:
    983
    Gender:
    Male
    Vehicle:
    2018 SR5 Premium
    Actually ordered the pump and washer kit from the OPs original post. :yes: Way to soon for me just putting them away.
     
    WallyT4R[QUOTED] likes this.
  11. Mar 29, 2019 at 9:36 AM
    #11
    nimby

    nimby in the drink

    Joined:
    Mar 27, 2017
    Member:
    #3777
    Messages:
    4,453
    First Name:
    Jake
    California
    Vehicle:
    2018 SR5P
    Is it really 10,000 miles? I don't remember the manual saying a dif/transfer case oil change was necessary with the first motor oil change.

    I guess I need to take a second look.

    Edit: 1st mention of a dif (front and rear) oil change was at 15,000 miles at towing or heavy load conditions.

    1st mention of a transfer case oil change was at 30,000 miles at towing or heavy load conditions.
     
    Last edited: Mar 29, 2019
    Jynarik likes this.
  12. Mar 29, 2019 at 11:32 AM
    #12
    DGP1961

    DGP1961 New Member

    Joined:
    Sep 17, 2018
    Member:
    #7154
    Messages:
    983
    Gender:
    Male
    Vehicle:
    2018 SR5 Premium
    No it's way further away I'm saying if you don't like their recommendation move it in 10,000 miles. I'm strictly guessing as I type this but the manual probably says like 60,000(ish) miles so I'm saying 50,000 should be comfortable.
     
    toy33 likes this.
  13. Mar 29, 2019 at 12:18 PM
    #13
    nimby

    nimby in the drink

    Joined:
    Mar 27, 2017
    Member:
    #3777
    Messages:
    4,453
    First Name:
    Jake
    California
    Vehicle:
    2018 SR5P
    Ah, I see.

    I went through the manual this morning and there was no recommendation for changing the difs, transfer case or transmission oil unless the vehicle is used in "extreme" driving conditions. Towing, heavy offroad use, ect....

    Not sure what to think about that.

    I wouldn't qualify as a driver in extreme conditions, but I would want to change all those oils at some point.

    With most of my vehicles in the past, that oil would be changed around the 100,000 mark and I never had an issue up to 250,000 miles when I got rid of them.

    The one vehicle (Ford Ranger) that I did change the oil religiously at 3,000 miles (motor) and 30,000 miles (dif an trans) went through a motor, trans, and rear-end all using Mobil 1. Probably just a Ford thing, but it didn't give me much confidence in Mobil 1 either.
     
  14. Mar 29, 2019 at 1:33 PM
    #14
    4Runner fun

    4Runner fun Just the beginning...

    Joined:
    Mar 18, 2019
    Member:
    #9220
    Messages:
    2,575
    Gender:
    Male
    First Name:
    Ryan
    Nebraska
    Vehicle:
    2019 Black T4R TRD Off Road Premium
    Wrangler Duratracs, center console organizer & trav all 1576 dog divider for the rear. Xpel wrap with ceramic coating. 20% tint on front windows. TRD intake. TRD oil cap Plus parts on shelf & a wish list.
    Is the 3,000 mile mark a misprint? That is before the first oil change!
    I read down below that between 30,000 - 60,000 miles depending upon driving conditions.
    I usually do those & tranny fluid every 60,000 miles in my work trucks. My '94 Cummins Ram needs it every 15,000 but those torque monsters are known transmission eaters...
     
  15. Mar 29, 2019 at 3:24 PM
    #15
    j cat

    j cat New Member

    Joined:
    Jun 28, 2016
    Member:
    #2223
    Messages:
    854
    massachusetts
    spacer lift front 1inch
    most change the transfer case oil at 30-40K miles .the rear/front diff needs to be checked for level and condition.. if looks grayish or black then change the diff oil...I did it @3K miles but now 25K on my runner the diff oil looks like new .. so a break in caused it.

    transmission fluid also requires checking but it is a PITA to check the level.most change the transmission fluids 70-120K miles but that is variable depending on the operation ... high speed in hot climate do it at 70K if a mall princes then 120K miles
     
  16. Mar 29, 2019 at 9:37 PM
    #16
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    2,443
    I did mine at 20000. I tow a lot and run in 4x4 frequently so I feel my 4 classifies under the extreme driving conditions category. I am approaching 30,000 miles and have not decided what to do with the trans (may wait until 60k) but I plan on changing the transfer case then.
     
    nimby and 4Runner fun like this.
  17. Jul 24, 2019 at 9:39 PM
    #17
    Tuco S.

    Tuco S. New Member

    Joined:
    Apr 24, 2019
    Member:
    #9653
    Messages:
    329
    Gender:
    Male
    Vehicle:
    2019 TRD Off Road w/KDSS in silver
    Drained and filled the rear diff today on my 2019 TRD Off Road. Odometer was only at 4200, but after viewing the specs for the oem 75W-85 fluid, let's just say I was not too impressed and wanted to put in something better. I settled on Motul Gear 300 75W-90 full synthetic (no LS additives), as it meets both GL-4 and GL-5 and will work just fine in the transfer case if I ever need to top it off.

    Factory fill was 2.8 liters, but it took 3.2 liters to reach the fill hole. The vehicle was perfectly level in my garage, and didn't move forward or backward in neutral.

    The drain plug had a fair amount of paste and some fine metal flakes on it. The oil was dark gray, which I assume is from the paste. Guessing it's some kind of lapping compound to help the parts wear in together.

    I used the correct oem crush gaskets, and was surprised to find out they are steel (same for the originals).

    I'll probably wait until 60k miles to drain the front diff and transfer case. Just wanted a better fluid in the rear since it does all of the work in 2wd which accounts for almost all of my mileage.
     
    scottalot, WallyT4R and SlvrSlug like this.
  18. Jul 25, 2019 at 6:17 PM
    #18
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,089
    Vehicle:
    1996 SR5 Limited
    Great write up. I’m due to change my dead dinosaurs too. My T4R is running like brand new and want to keep it that way. Antique tags coming in 2021!!!
     
    Last edited: Jul 25, 2019
  19. Jul 27, 2019 at 8:14 AM
    #19
    Living the dream

    Living the dream New Member

    Joined:
    Nov 3, 2018
    Member:
    #7661
    Messages:
    276
    Gender:
    Male
    ABQ
    Vehicle:
    2019 T4R Off-Road KDSS
    Agree with you. Using regular synthetic gear oil can cause deterioration of the soft metal (brass, copper) bushings in the transfer case because of the high phosphates. Royal Purples Synchromax is also considered to be an acceptable replacement fluid for the transfer case and is significantly less than Toyota’s LF fluid.
     
    OverRunner likes this.
  20. Jul 27, 2019 at 1:35 PM
    #20
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    2,443
    I used Synchromax. Works great.
     
  21. Aug 1, 2019 at 2:18 PM
    #21
    j cat

    j cat New Member

    Joined:
    Jun 28, 2016
    Member:
    #2223
    Messages:
    854
    massachusetts
    spacer lift front 1inch
    check the drive train fluids for level and condition ..3K miles I changed my rear diff gear oil .. very dark had specks in it.. 23K miles and gear oil looks perfect.. rear diff break in !!
     
    WallyT4R likes this.
  22. Aug 2, 2019 at 1:52 PM
    #22
    Tuco S.

    Tuco S. New Member

    Joined:
    Apr 24, 2019
    Member:
    #9653
    Messages:
    329
    Gender:
    Male
    Vehicle:
    2019 TRD Off Road w/KDSS in silver
    I changed my rear diff fluid at 4200 miles just because I wanted to put in a better fluid. The factory fluid was dark gray - almost black, and there was a lot of black paste and fine metal on the drain plug magnet. The discoloration is no doubt caused by some kind of paste they add at the factory.

    By comparison, at 4200 miles the engine oil was barely starting to darken, and that oil gets much hotter than the gear oil in the rear diff.
     
  23. Aug 2, 2019 at 1:58 PM
    #23
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,089
    Vehicle:
    1996 SR5 Limited
    Does anyone add an anti-foaming agent like GM Limited slip diff’s?
     
  24. Aug 3, 2019 at 6:48 AM
    #24
    j cat

    j cat New Member

    Joined:
    Jun 28, 2016
    Member:
    #2223
    Messages:
    854
    massachusetts
    spacer lift front 1inch
    I have a 1996 GM sedan with limited slip diff.. the toyota does not require any limited slip additive it is a open diff with no clutches. the GM limited slip diff have clutches which is why I have to add the additive so the clutches will cause the axles to slip. the axles are always in the locked position so If I did not add this additive the diff would chatter on turns .

    using a synthetic gear oil like mobil 75-90wt with the LS on it will not effect the rear diff on Toyota.
    on my GM sedan I must use the GL5 80-90wt gear oil .. conventional ...then add the 4OZ of the slip additive.
     
    Last edited: Aug 8, 2019
  25. Aug 7, 2019 at 2:48 PM
    #25
    danssr5

    danssr5 New Member

    Joined:
    May 29, 2019
    Member:
    #10078
    Messages:
    178
    Gender:
    Male
    First Name:
    Dan
    Vehicle:
    2017 sr5 premium 4x4
    bridgestone revo 3 5100's @2.5/1.5. Stock springs & rear daystar 1.5" spacers
    Not sure what others experiences are but I have never replaced crush washers on any vehicle I have ever owned. Even a honda civic i had with 250k miles on it changing the oil every 3k miles on my own and it never leaked.

    Are the crush washers on Toyota's inferior?

    Just asking.

    Thanks!
     
    Technologic80 and ElectroBoy like this.
  26. Aug 7, 2019 at 2:57 PM
    #26
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,089
    Vehicle:
    1996 SR5 Limited
    Just the diffs. Well they are so cheap might as well...got these for nine bucks shipped...05FE2DA1-E786-461B-AE28-4BEC7BD37D56.jpg
     
    WallyT4R likes this.
  27. Aug 7, 2019 at 4:21 PM
    #27
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,089
    Vehicle:
    1996 SR5 Limited
    Check that, I just researched and remembered my turd gen’s diffs, transfer case don’t have crush washers. Anybody want these?
     
  28. Aug 8, 2019 at 7:26 AM
    #28
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,089
    Vehicle:
    1996 SR5 Limited
    Asked Toyota near me how much a gear oil change would be......$600 Jesus.....Found Toyota 75-90w gear oil at another dealership for $8.99 a quart, and they only had seven left....SCORE!!!!
     
  29. Aug 8, 2019 at 7:30 AM
    #29
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,089
    Vehicle:
    1996 SR5 Limited
    It’s been 100,000 miles and over ten years since I’ve changed it......
     
    nimby and KSJ08 like this.
  30. Aug 8, 2019 at 7:54 AM
    #30
    4x Old Guy

    4x Old Guy New Member

    Joined:
    Aug 2, 2019
    Member:
    #10764
    Messages:
    280
    Gender:
    Male
    Riverside, CA
    Vehicle:
    2019 Silver TRD Off-road Premium
    Big-O Bigfoot A/T tires
    Changing oil (engine, diffs, transfer, trans) on a short first interval is a good idea. All the new parts that the oil is lubricating will be breaking in and there will be a higher amount of very fine metal sluffed off as the rough edges get worn in which ends up in the oil and filter. Better to get it out of there than having it getting shoved through bearings for x thousand miles.

    One property of gear oil os it’s ability to withstand and protect against the shear forces of gear teeth and bearing elements sliding past one another. Over time, this protection wears out and the metal parts wear directly on each other more and more (the oil starts to break down which causes more friction which causes the oil to break down more which causes more friction, etc etc.). Spending $ on changing the oil at the recommended intervals is less expensive than spending $$$$$ on having a tranny or gear box rebuilt, and way more convenient (and less embarrassing) than trying to get someone to tow your rig out of the middle of nowhere.
     
    krravi and max4run like this.

Products Discussed in

To Top