What have you done to your 5th Gen 4Runner today?

My bumper has a mount point, so I am starting there with an NMO mount so I can swap antennas if I want. I only use 1 radio at a time typically. The bumper is low, but should be better than the handheld antenna inside the truck.

 

Good stuff!

 

I thought about getting a different color of the side pieces, but I didn’t know what to get. My Runner is white but white just seems like it would get dirty, the red looks more orange in their pictures and the blue is too light for my taste.

 

Why cut the bolt head off & remove the Jam nut?

 

Installed the black/hd sumo springs. Zip tied the sensor wire out of the way. Towing my popup next weekend, can’t wait to compare the squat afterwards

 

Please re read the process.
The bolts used in the front, (bolt heads cut off, making them studs) are cut to make them the proper length.
The jam nuts are used to tighten them fully into that location using loctite. Once tightened, the jam nuts have to be removed to proceed to the next step.
If the jam nuts are not removed one could not proceed to insert the spacers into the holes.

 

I have printed the directions from earlier, just not reviewed thoroughly. I was thinking the jam nuts were on top. Thanks for clarifying

 

Were you able to purchase all the hardware from same vendor?

 

No sir, used 2 vendors.

Quote: “Items ordered came from Belmetric & McMaster-Carr.”

 

Would you mind giving me the break down? It just rolled over to 9636mi.The pic was at 9600 on way to late lunch.

 

Sure, here is the breakdown !

Look up what was used and search McMaster and if you don’t find what you need, search Belmetric.
If you don’t find what you need there, do as others have done and source items.
You have all the information at your hands and want someone to do the work.

 

All from McMasters $91.09

 

Hey, does anyone know what the total headroom will be once seat jackers are installed? This is regarding a 5th gen 4runner with a sunroof, thank you.

 

transfer station run

 

Lol i had to Google what a "transfer station" was. Never heard a waste dump called that before. Guess that's an actual technical term. Lol.

 

hey Camel we know youre fake as you’ve asked the same thing on 6 different threads. Youve been reported

 

The reason why is because I wanted to increase my chances of getting an answer.

 

You just increased your chances of being an idiot and got reported.

Go away, you dont have a 4runner. Stop wasting our time with this nonsense

 

Actually, it is logical to post to more places because that increases the chances of getting a response. Also, I may get a 4Runner in the future, and what harm is it to ask questions in advance? Make sure to do some critical thinking, you need to exercise your brain.

 

By this logic, a toilet is a "Transfer Station".

 

i heard they answered this question on the Ford Bronco forum try there and stay there.

 

Lmao very well could be

 

Hah! Transfer station is only a pc canadian term, I meant waste center. We’re also forced to spell center, centre

 

Got a screw in a tire. Luckily it went flat in the driveway instead of while driving. I dropped the spare tire and the steel wheel is so rusty that I don’t want to risk driving on it. I put one of the winter snow tires on instead until I can get the other tire patched. I’m going to need to find an aluminum wheel to replace the steer spare at some point.