Measurements for stock

Hello all, I recently got a 04 4Runner, it has a spacer lift on it currently. I was wondering if anyone has measurements of their v6 4wd stock height to the top of their fender. I’m going to be lifting my truck this weekend with 6112 and I’m just hoping I get a lift. Thank you.

 

Welcome

 

I can't give you stock measurements...but I recommend getting measurements from the center of the hubs to the inside of the fender opening.

If you measure from the ground to fender openings, tire size/height differences and even air pressure can throw off the true measurement from one vehicle to another unless they both have identical tires and air pressure, center of hub to fender will be consistent on stock settings from vehicle to vehicle unless they have worn out components.

This would be a interesting topic if everyone gave both measurements so others can see what differences tires and air pressure make in the height, this applies even to stock size tires since the same size tire can differ in overall height from brand to brand.

 

welcome

 

Welcome.

 

Welcome to the forum!

 

Welcome

 

Welcome from Arizona!

 

Welcome here! Solid choice for your lift. I run Bilstein as well.

Maybe ask the stock height question in 4th Gen pages, but, 5th gen stock height from hub to fender is I believe 19.5" front and 22" rear.

goodluck