1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2025 4Runner 6th Gen Just Landed at US Ports ⚓️ [First Look Photos]

Discussion in '6th Gen 4Runners (2025+)' started by jwocky, Jan 11, 2025.

  1. Jan 15, 2025 at 6:12 PM
    #61
    Airdam

    Airdam New Member

    Joined:
    May 4, 2024
    Member:
    #40249
    Messages:
    669
    First Name:
    airdam
    Vehicle:
    2008 Urban Runner 2012 Limited 2023 TRD Sport
    I made one of them functional, to blow down on the TRD S/C on my tacoma.
    I live in the DEEP south, the only weather we worry about is humidity and tornados. Not living in the ice and snow belt makes full time 4wd something that we just dont really need.
    "What, you want all 4 wheels and tires pulling all the time???"
    If i see a hill that needs climbing and the LSD rear diff wont get me up it, i have 4wd. I always buy 4wd stuff, and in the past 20 years the ONLY time i have needed 4wd was to pull someone out of a ditch (probably 2014'ish). Shouldnt have done it cause it bent my trailer hitch from yanking sideways with a snatch rope. So..... I dont really need full time AWD or 4WD but i can understand its benefits for someone who lives in Maine or Michigan, but that just aint me. If you need it, rock and roll. If you hate the hood scoops, more power to'ya. I have vehicles that appeal to me visually and are functional for what i need and that have amenities that help me enjoy my drive. You are more than welcome to like and dislike whatever floats your boat.

    P8290735.jpg
     
    Mr.DRZ likes this.
  2. Jan 15, 2025 at 6:51 PM
    #62
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,435
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Jan. 2024: custom installed 2lb fire extinguisher between drivers seat and door -Feb. 2024: swapped interior lighting to diode dynamics led’s -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting -Feb. 13/2024: double ditch lights, on new Rago Fabrication Extension brackets. -3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Existing: 3inch EVERGEAR clear lens LED pods -May 2024: custom black aluminum grille mesh installed in front of factory plastic -June 2024: custom built powder coated dom sliders -Nov. 2024: thermo-plastic rear mudflaps -Dec. 2024: rear bumper cover clearance cut, sprayed newly exposed parts black -Jan. 2025: trailer hitch removal, relocation of rear led pods to crossmember New: -Exhaust pipe chop after axle -March 2025: new SPC upper control arms, bushings, balljoints. Raised front end 0.75” via Bilstein 5100 spring seat. -April 2025: Evergear bezel-less cube ditch lights 4 LEDs 40W 3.33A 4800Lm 328’ beam distance 30° 6000k beam angle shatter & crack resistant lens -April 2025: Evergear Ultra Series light bar 27-3/4” flood spot combo 60 LEDs 60W 5A 6000Lm 1227’ beam distance Dual row, dual beam angle 30°/60° April 2025: BULLY Rock Crawler Hi-Intensity LED Utility Lights, Pair 1260 lumens @ 15w (3 x 5w CREE) each 120° flood beam waterproof, dustproof. Under hood: -Blue Fire 6-Circuit Fuse Block w/ LED Indicator & Protection Cover -Blue Sea 100A Circuit Breaker w/ reset lever In progress/in the garage queue: ~ Wanted - 80% OFFROAD Hitch Replacement Recovery Point, PerryParts or Wheelers bump stops, 1" body lift, custom dom front bumper, winch, rear dom bumper with side hoops, kdss angle correction, C or D load 35’s, bolt on cat shields
    I have the perfect meme to share that encompasses what truly caused this change in the last 4-5 years, but last time I caught a mandatory vacation for posting it @TrailSpecial22 :laugh:
     
    roboturner likes this.
  3. Jan 15, 2025 at 7:05 PM
    #63
    cuse93

    cuse93 Ice Station Zebra

    Joined:
    Oct 20, 2021
    Member:
    #23892
    Messages:
    467
    Gender:
    Male
    IMG_2124.jpg
     
    roboturner, Mass4runner and Sin4R like this.
  4. Jan 15, 2025 at 7:28 PM
    #64
    Rellims

    Rellims New Member

    Joined:
    Jan 13, 2025
    Member:
    #44965
    Messages:
    7
    Gender:
    Male
    First Name:
    Sean
    Colorado
    Vehicle:
    Incoming 2025 Off Road
    Pending
    Got the money, time here on earth is not guaranteed. I plan to enjoy what I can while I can.
     
    Last edited: Jan 15, 2025
    TejasRunner likes this.
  5. Jan 15, 2025 at 8:17 PM
    #65
    roooo

    roooo New Member

    Joined:
    Nov 11, 2023
    Member:
    #36679
    Messages:
    356
    2018 Silver ORP KDSS
    first 10k orders get a grille upgrade

    looks borderline aztec
     
    djwantke likes this.
  6. Jan 15, 2025 at 8:42 PM
    #66
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,435
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Jan. 2024: custom installed 2lb fire extinguisher between drivers seat and door -Feb. 2024: swapped interior lighting to diode dynamics led’s -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting -Feb. 13/2024: double ditch lights, on new Rago Fabrication Extension brackets. -3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Existing: 3inch EVERGEAR clear lens LED pods -May 2024: custom black aluminum grille mesh installed in front of factory plastic -June 2024: custom built powder coated dom sliders -Nov. 2024: thermo-plastic rear mudflaps -Dec. 2024: rear bumper cover clearance cut, sprayed newly exposed parts black -Jan. 2025: trailer hitch removal, relocation of rear led pods to crossmember New: -Exhaust pipe chop after axle -March 2025: new SPC upper control arms, bushings, balljoints. Raised front end 0.75” via Bilstein 5100 spring seat. -April 2025: Evergear bezel-less cube ditch lights 4 LEDs 40W 3.33A 4800Lm 328’ beam distance 30° 6000k beam angle shatter & crack resistant lens -April 2025: Evergear Ultra Series light bar 27-3/4” flood spot combo 60 LEDs 60W 5A 6000Lm 1227’ beam distance Dual row, dual beam angle 30°/60° April 2025: BULLY Rock Crawler Hi-Intensity LED Utility Lights, Pair 1260 lumens @ 15w (3 x 5w CREE) each 120° flood beam waterproof, dustproof. Under hood: -Blue Fire 6-Circuit Fuse Block w/ LED Indicator & Protection Cover -Blue Sea 100A Circuit Breaker w/ reset lever In progress/in the garage queue: ~ Wanted - 80% OFFROAD Hitch Replacement Recovery Point, PerryParts or Wheelers bump stops, 1" body lift, custom dom front bumper, winch, rear dom bumper with side hoops, kdss angle correction, C or D load 35’s, bolt on cat shields
    So AZTEC lol those were something
     
  7. Jan 15, 2025 at 8:43 PM
    #67
    FourBelugas

    FourBelugas New Member

    Joined:
    Jul 7, 2023
    Member:
    #33816
    Messages:
    1,238
    Vehicle:
    23 white ORP
    then you should get the GX550 instead. Better in every way if you got the extra 10-20k.
     
  8. Jan 15, 2025 at 8:52 PM
    #68
    Turd Ferguson

    Turd Ferguson New Member

    Joined:
    Jun 4, 2017
    Member:
    #4146
    Messages:
    1,439
    Gender:
    Male
    MA
    Vehicle:
    2017 TRD Offroad Premium
    That’s what I said. Even the cheapest GX, the $65K premium model is speced nicer than the top 4Runner. Plus you get a V6, which hopefully won’t have a bearing failure. :rolleyes:
     
    FourBelugas[QUOTED] likes this.
  9. Jan 15, 2025 at 9:36 PM
    #69
    FourBelugas

    FourBelugas New Member

    Joined:
    Jul 7, 2023
    Member:
    #33816
    Messages:
    1,238
    Vehicle:
    23 white ORP
    Yeah, makes zero sense to pay 61k + T&L for a mid trim 4 cylinder gas only 4Runner when the GX exists.

    Some reviewers are right, the new Land Cruiser is the GX.
     
  10. Jan 16, 2025 at 1:06 AM
    #70
    jwctaco

    jwctaco Retired , driving slow in the fast lane

    Joined:
    Apr 19, 2024
    Member:
    #39916
    Messages:
    404
    Gender:
    Male
    First Name:
    Jim
    S.W. Michigan
    Vehicle:
    23’ T4R
    I like ice cream :thumbsup:
     
  11. Jan 16, 2025 at 3:24 AM
    #71
    NoDak

    NoDak New Member

    Joined:
    Feb 16, 2024
    Member:
    #38572
    Messages:
    434
    Gender:
    Male
    First Name:
    JR
    North Dakota

    man i am glad my dealer is going to sell me my 4R plat just under 61k :)
    the 4R limited rims only come in 20in and have a very unique look to them, hence it really doesnt look right on a taco.

    i know cause i have a 4R limited and you will be surprised how many domestics copied that look for other full size vehicles. a co worker has a gmc at4 and it has the same type of look to its rims
     
  12. Jan 16, 2025 at 3:28 AM
    #72
    NoDak

    NoDak New Member

    Joined:
    Feb 16, 2024
    Member:
    #38572
    Messages:
    434
    Gender:
    Male
    First Name:
    JR
    North Dakota
    well i have a unique case as the nearest authorized dealer is 550 miles away. i am not running that far to get any warranty work done on any lexus. too much of a pita. and yes i did call lexus finanacial and talked with them, no way around it.

    and as far as the LC250, its nice looking but meh in my eyes. reminds me too much of the FJ cruiser and i really didnt care for that vehicle either.

    just my preference on looks.
     
  13. Jan 16, 2025 at 4:56 AM
    #73
    Sin4R

    Sin4R L4L at Costco parking lot.

    Joined:
    Jan 11, 2024
    Member:
    #37843
    Messages:
    750
    Distant land called Timbuktu
    Vehicle:
    2024 4Runner Limited
    Mall crawling kit.
    I don't think new 4Runner is a good value. With that said, I don't think criticizing Toyota based on MSRP while ignoring inflation is reasonable.

    6th Gen 4Runner costs more than 5th Gen because $1 USD in 2019 is equivalent to $1.23 in 2025 and that is just official figures that do not take supply chain issues and shortages into account.
     
    Shredder likes this.
  14. Jan 16, 2025 at 5:17 AM
    #74
    Turd Ferguson

    Turd Ferguson New Member

    Joined:
    Jun 4, 2017
    Member:
    #4146
    Messages:
    1,439
    Gender:
    Male
    MA
    Vehicle:
    2017 TRD Offroad Premium
    Increasing the cost by $10K+ in one model year is a lot more than just inflation.
     
    4Hopper likes this.
  15. Jan 16, 2025 at 6:13 AM
    #75
    4Hopper

    4Hopper New Member

    Joined:
    Jul 27, 2024
    Member:
    #41854
    Messages:
    194
    Gender:
    Male
    Vehicle:
    24 Ice Cap 4R TRDOR Prem
    1000% percent correct.

    And that’s before you even arrive at the dealer and discover the previously standard basic features that Toyota deleted. Like homelink, or a steel front skid plate…

    Not speaking to those who believe that a $60-70k 4Runner is remotely reasonable, but to all the rest of us….we can be fans of this redesign and not fall into to the crazy price trap like early Gen4 Tacoma owners did. Just like Taco, you should not buy one of these until there are discounts.
     
    icebear, djwantke and Steely123 like this.
  16. Jan 16, 2025 at 9:55 AM
    #76
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,435
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Jan. 2024: custom installed 2lb fire extinguisher between drivers seat and door -Feb. 2024: swapped interior lighting to diode dynamics led’s -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting -Feb. 13/2024: double ditch lights, on new Rago Fabrication Extension brackets. -3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Existing: 3inch EVERGEAR clear lens LED pods -May 2024: custom black aluminum grille mesh installed in front of factory plastic -June 2024: custom built powder coated dom sliders -Nov. 2024: thermo-plastic rear mudflaps -Dec. 2024: rear bumper cover clearance cut, sprayed newly exposed parts black -Jan. 2025: trailer hitch removal, relocation of rear led pods to crossmember New: -Exhaust pipe chop after axle -March 2025: new SPC upper control arms, bushings, balljoints. Raised front end 0.75” via Bilstein 5100 spring seat. -April 2025: Evergear bezel-less cube ditch lights 4 LEDs 40W 3.33A 4800Lm 328’ beam distance 30° 6000k beam angle shatter & crack resistant lens -April 2025: Evergear Ultra Series light bar 27-3/4” flood spot combo 60 LEDs 60W 5A 6000Lm 1227’ beam distance Dual row, dual beam angle 30°/60° April 2025: BULLY Rock Crawler Hi-Intensity LED Utility Lights, Pair 1260 lumens @ 15w (3 x 5w CREE) each 120° flood beam waterproof, dustproof. Under hood: -Blue Fire 6-Circuit Fuse Block w/ LED Indicator & Protection Cover -Blue Sea 100A Circuit Breaker w/ reset lever In progress/in the garage queue: ~ Wanted - 80% OFFROAD Hitch Replacement Recovery Point, PerryParts or Wheelers bump stops, 1" body lift, custom dom front bumper, winch, rear dom bumper with side hoops, kdss angle correction, C or D load 35’s, bolt on cat shields
    I’d have to debadge the gaudy hatch

    IMG_9542.png

    Can’t be looking like these inferior vehicles

    IMG_9575.jpg
    IMG_9579.jpg
    IMG_9543.png
     
  17. Jan 16, 2025 at 9:57 AM
    #77
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,435
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Jan. 2024: custom installed 2lb fire extinguisher between drivers seat and door -Feb. 2024: swapped interior lighting to diode dynamics led’s -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting -Feb. 13/2024: double ditch lights, on new Rago Fabrication Extension brackets. -3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Existing: 3inch EVERGEAR clear lens LED pods -May 2024: custom black aluminum grille mesh installed in front of factory plastic -June 2024: custom built powder coated dom sliders -Nov. 2024: thermo-plastic rear mudflaps -Dec. 2024: rear bumper cover clearance cut, sprayed newly exposed parts black -Jan. 2025: trailer hitch removal, relocation of rear led pods to crossmember New: -Exhaust pipe chop after axle -March 2025: new SPC upper control arms, bushings, balljoints. Raised front end 0.75” via Bilstein 5100 spring seat. -April 2025: Evergear bezel-less cube ditch lights 4 LEDs 40W 3.33A 4800Lm 328’ beam distance 30° 6000k beam angle shatter & crack resistant lens -April 2025: Evergear Ultra Series light bar 27-3/4” flood spot combo 60 LEDs 60W 5A 6000Lm 1227’ beam distance Dual row, dual beam angle 30°/60° April 2025: BULLY Rock Crawler Hi-Intensity LED Utility Lights, Pair 1260 lumens @ 15w (3 x 5w CREE) each 120° flood beam waterproof, dustproof. Under hood: -Blue Fire 6-Circuit Fuse Block w/ LED Indicator & Protection Cover -Blue Sea 100A Circuit Breaker w/ reset lever In progress/in the garage queue: ~ Wanted - 80% OFFROAD Hitch Replacement Recovery Point, PerryParts or Wheelers bump stops, 1" body lift, custom dom front bumper, winch, rear dom bumper with side hoops, kdss angle correction, C or D load 35’s, bolt on cat shields
    I much prefer how small older Toyota vehicle badges were, less is more

    IMG_9577.jpg
    IMG_9578.jpg
     
    TejasRunner likes this.
  18. Jan 16, 2025 at 10:30 AM
    #78
    NoDak

    NoDak New Member

    Joined:
    Feb 16, 2024
    Member:
    #38572
    Messages:
    434
    Gender:
    Male
    First Name:
    JR
    North Dakota
    lol i did a mock up of the rear w/o the 4Runner emblem, this is what mine will look like when it comes in

    not in heritage blue, but i cant find a decent pic of one to mock up.

    and yes i will be having the dealer remove the 4Runner emblem.

    and yes that is my current license plate

    2025 4Runner License Plate.jpg
     
    TejasRunner likes this.
  19. Jan 16, 2025 at 10:38 AM
    #79
    Rellims

    Rellims New Member

    Joined:
    Jan 13, 2025
    Member:
    #44965
    Messages:
    7
    Gender:
    Male
    First Name:
    Sean
    Colorado
    Vehicle:
    Incoming 2025 Off Road
    Pending
    Within 1 hour of owning one is debadge + air dam removal for me.
     
    NoDak[QUOTED] likes this.
  20. Jan 16, 2025 at 11:26 AM
    #80
    FourBelugas

    FourBelugas New Member

    Joined:
    Jul 7, 2023
    Member:
    #33816
    Messages:
    1,238
    Vehicle:
    23 white ORP
    Let's say inflation is 23% since 2019. A 25 4Runner ORP starts at 55k. In 2019 the ORP started at 40k. That's a 37.5% increase.

    OR and SR5 saw slightly lower increase % but they also saw de-contenting like removal of power seats and such. The SR5 doesn't even come with a spare tire anymore.
     
  21. Jan 16, 2025 at 4:27 PM
    #81
    Turd Ferguson

    Turd Ferguson New Member

    Joined:
    Jun 4, 2017
    Member:
    #4146
    Messages:
    1,439
    Gender:
    Male
    MA
    Vehicle:
    2017 TRD Offroad Premium
    Unfortunately there are too many people that have to have the newest thing and are willing to pay these ridiculous and add ons. If people just had some restraint and didn’t buy for a bit these dealers would stop this BS.
     
    4Hopper[QUOTED] and FourBelugas like this.
  22. Jan 16, 2025 at 7:10 PM
    #82
    FourBelugas

    FourBelugas New Member

    Joined:
    Jul 7, 2023
    Member:
    #33816
    Messages:
    1,238
    Vehicle:
    23 white ORP
    We are on a site where many people are now financing 50-75k 4x4s that are supposed to last 20 years to commute with and trading them in every few years for the newest model, so restraint is probably a dirty word to a lot of people.
     
    Turd Ferguson[QUOTED] likes this.
  23. Jan 16, 2025 at 9:16 PM
    #83
    BoiseG

    BoiseG New Member

    Joined:
    Mar 31, 2024
    Member:
    #39509
    Messages:
    117
    Gender:
    Male
    Vehicle:
    2024 ORP
    In all of the promo pics and videos they looked like rugged off road vehicles, these look like soccer mom suv's.
     
To Top