Bora wheel spacers( quality?)

Is anyone running bora wheel spacers?
They aren't cheap so I'm questing the quality is pretty good.

 

I have never heard anything bad about Bora. Quality should be on par with spidertrax

 

I installed 3/4" Bora spacers on my vehicle. 6 years, 120,000km, no issues

 

I had 0 issues running 1/2" spacers up front to clear my shock reserviors on my Tacoma.

 

Thanks guys.

 

Just get wheels with the correct offset

 

I already have -12. But I want more width

 

Bora and Spidertrax are both good quality. I’ve run both without issue

 

What size spacers are you going with?
I also have -12 offset. I didn't want to trim my wheel studs so I stuck with the 1.25" spidertrax.

Edit: IMO it's not too much poke with the 34s (285/75/17)
But when I move to 35's they will be. So I'll either ditch the spacers or go with different wheels.

 

Have run two sets of bora on other vehicles and all are perfect spec.

 

Where are you guys buying three-quarter inch spacers?

 

^ A-mazon, but that was 6 years ago. Edited to kill default link

 

I think I'm going with 1.75" ( just on the front) and 1.25" in the rear. Since my lift pushed my front tires inward(like all ifs).

 

You can order direct from their webpage.
https://www.motorsport-tech.com/bor...jg2JdHdNfyZzR9BbkgqojcBCj_HGg7G1gP9TCdNieG2If