“New” Pro Wheels on TRD OR

Best looking OEM 4Runner wheel hands down.

 

Have these wheels. Bolted right up to my 2023 ORP. No problems what so ever. In fact, noticed a slight increase in MPG too!

 

I also don’t care for the red circle on the center cap . Since you have to order the center caps separately with these wheels I wonder if the first generation TRD caps would fit ? I also wonder why Toyota dealers are closing these wheels out ?

 

Not sure about that, but have seen some members sport the Bronze 40th Anniversary center caps. One could also delete the "red circle" with some Etsy decals or maybe plasti dip 'em?

 

Thank you guys. The black lug nuts are coming in mid July. Yes they bolted up fine. I still am " kind " confused on the off set thing. Plus 15mm for stock ones, new Pro wheels 4mm, but these stick out more? My head is not computing. Thank you guys for your time

 

The lower the offset number, the more a wheel pokes out past the fender.

 

Do the newer wheels fit 2020 and below 4Runners.. can someone confirm please.....???

 

Yes! Everything from 2010 upto 2024. Same lug nuts.

 

I know it is the same lugnut..
however, bore width might be different for 2022+ ?

 

Positive offset pulls the wheel face inward; negative offset pushes the wheel face outward.

 

Thanks but how is this helpful?

 

I have them on my 2011. Fits like a glove, works as intended.

 

Sure..

 

FYI there are a couple new OEM center caps that will fit these wheels, both off the new Tundra

 

Happen to have part #'s for each of those?
Asking for a friend

 

Don't know the part number for the tri-color ones, just that they're from the 2025 Tundra TRD Rally package

 

Appreciate it!

 

Was getting the bronze cap, now looking at the white and black Toyota, I think I like this better...

 

Do you have a pic of them installed?

 

Do you know if these can be installed without taking the wheels off the truck? Wondering if they install from the back side. (Seem to not be removable from the front side)

 

I don't have a picture of them installed on the 4R TRD Pro wheels but this is a pic of them installed on a different Toyota wheel, my brother has them on his new Land Cruiser.



If your wheels have no center caps in them then the caps would just snap in place. But if there are already caps installed then you would need to remove the wheel to remove the existing cap.

 

Suhweet, another thread where I get to show off my bronze wheels!

 

It helps jake1530 (and others) understand how a lower offset number moves the tire further away from the centre of the vehicle.

 

Do the TRD pro wheels with offset +4 (versus limited 20" offset +12 or +15) have issues with 265/70R17 tires on a Limited?
I have read that some people have issues with the fender liner and others do not...
I know om the TRD pro they trim the fender liner a bit from factory at the port before they install the TRD pro wheels .... do they use same setup?

 

Anyone have a recommendation on best place to order the new TRD wheels?

 

Hope you will give a second thought of keeping your factory TRD Off-road wheels that came from Japan, wider than TRD pro wheels, have some valve stem protection.

If you are downgrading functionality for looks of TRD Pro wheels which get fitted to 4runners in the USA, consider keeping your eyes on Facebook marketplace for a take off set for not much money. Hope they are sold with center caps and black lug nuts.

 

You deserve a much longer reply, but I’ll save both of us some time. I didn’t ask for an opinion piece about the trd off-road wheels, or your opinion on what I should or shouldn’t put on my vehicle. I haven’t had the off-road wheels for 6 years.

 

You're on a forum bud. All you are going to get here are opinion pieces.

 

Huh, learn something new on here all the time. Didn't know there was a change. The new ones look pretty damn good imo.

 

What state are you in?