1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Spacer vs lift, 275 vs 285

Discussion in '5th Gen 4Runners (2010-2024)' started by Gordo71, Jun 5, 2018.

  1. Jun 5, 2018 at 6:40 PM
    #1
    Gordo71

    Gordo71 [OP] New Member

    Joined:
    Jun 5, 2018
    Member:
    #6196
    Messages:
    4
    Gender:
    Male
    Vehicle:
    2016 SR5 stock
    NFAB bars
    hello ALL, I am new to this forum stuff, i purchased my first T4R about 3 months ago, i do a ton of on road miles, but cant stand the factory rake.... the most off road i do are logging roads during the hunting season..... I'm torn between the pro comp 3/2 spacer lift with stock rims and BFG 285/70r17's or the Billstein 5100's and Cooper STT MAXX 275/70r17's... any suggestions would be welcomed as there are a TON of opinions out there that contradict each other. Thanks in advance.
     
  2. Jun 6, 2018 at 9:14 AM
    #2
    JosephMehta

    JosephMehta New Member

    Joined:
    Apr 18, 2018
    Member:
    #5854
    Messages:
    118
    Gender:
    Male
    Vehicle:
    Zombocalypse
    Shrockworks Front Bumper, CBI Rear Swing Away with dual Jerry Cans and full size spare, Full Shrockworks Armor, Warn 9.5 Synthetic, PIAA Lighting on roof rack and front bumper, Rear lighting wired to vehicle's reverse gear, Dobisons dual slide out rear bay storage with sliding top and refrigerator tie-downs, Limb Risers, Gobi Rack w/mounted Powertank, Fire Extinguisher, Jack, Axe, and Shovel, 33" Nitto Grapplers (295/70/17), Body Mount Chop, Icon Stage 7 Billet w/S2 Stage 3 Secondary adjustable front suspension, 3.5 inch Icon Stage 7 Billet with Billet Upper and Lower Links, Icon Bump Stop, 3.0 inch Icon Overland Rear Coils, ARB Front and Rear Air Locker with ARB Differential Breather (relocated to engine bay), ARB Twin Compressor mounted in engine bay, 360 degree, 4-camera system with DVR with monitor mounted on the dash, Dual Rear Headrest Monitors w/DVD and gaming capability Future mods in 2019: Magnusson Supercharger w/Catback system and possibly an roof mounted, solar heated shower and water storage
    There are so many combinations that are just as good as the other. Reading your post the only thing that really pops out is a potential issue with the spacer lift using 285s -- with this combination there's a reasonable chance you will get some rubbing when the wheel is fully turned. I started with spacers, 2 inches, and 275s and had rubbing at full turn of the wheel (for example, when in reverse and backing out of a parking space). Then, I went to a full 3-inch suspension lift, using the ToyTec BOSS on the same 275s (BFG KO2s) and had no rubbing, and extra space (BUT...full disclosure: I also removed the front bumper and had the Shrockworks bumper installed, which gave more room upfront/underneath).

    Now, I'm in the middle of re-doing the suspension with 3.5-inch ICON stage 6 (billet), including the Stage 3 Secondary (front) shocks, and swapping the 275s for 295s. I don't believe that there will be any rubbing issues with this suspension, but will update when able.
     
  3. Jun 6, 2018 at 9:20 AM
    #3
    JBTRD

    JBTRD As usual, saying something stupid

    Joined:
    Apr 2, 2016
    Member:
    #1809
    Messages:
    672
    Gender:
    Male
    First Name:
    Jeremy
    Ohio
    Vehicle:
    2016 (The Real) Trail Edition
    I do the same as you, logging roads, and hunting season. I have a spacer lift with the pro suspension. I am switching a suspension lift because of the weight i have added. The spacer lift will work, but you decrease the travel of your suspension especially on logging roads, like my hunting camp, i would recommend a suspension lift, especially since you have a lot of gear in your truck, spacers are weak on holding weight. And if you want to add a bumper like i did you will most deffinatly need a real lift.
     
    JosephMehta likes this.
  4. Sep 27, 2018 at 7:48 PM
    #4
    szuyung3000

    szuyung3000 New Member

    Joined:
    Apr 26, 2018
    Member:
    #5906
    Messages:
    65
    Gender:
    Male
    First Name:
    SYH
    Vehicle:
    2016 4runner SR5 4x4
    what do you or people mean that you have to re-gear? From what I heard is 285/70R17 is the biggest tire you can go w/o the need for re-gearing. Is re-gearing means correcting the automatic transmission shifting point? Like re-calibrating the TCM Transmission Control Module?
     
  5. Sep 28, 2018 at 5:50 AM
    #5
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,542
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    Re-gearing means putting lower gears in your front & rear diffs.
     
    ruiz4251 likes this.
  6. Sep 28, 2018 at 6:13 AM
    #6
    ruiz4251

    ruiz4251 "but it was funny huh?"

    Joined:
    Aug 24, 2018
    Member:
    #6877
    Messages:
    1,421
    Gender:
    Male
    First Name:
    George
    TEXAS
    Vehicle:
    16 Trail Premium
    ICON custom stage 6 3"; 33's; gobi rack; SSO bumper; SSO high clearance; Rigid lights; 10k X2o winch; AFe intake; brola cat back; tint; aftermarket sound; opor sliders; pedal commander, viper smart start mobile tracker, Canvasback Liner; Rago rear window molles; victory 4x4 center console molle; cbi front skid steel; cbi aluminum tran skid; rci fuel aluminum skid; rci dif skid; rago rear shock skids; rci lower link skids; tenton workshop shift knob; yoga shop grenade trans knob;alpha rex headlights; USR blacked out tails; USR turns to turns; blacked out sequential mirror turn
    just cause it work dont mean it's correct. I'm running 285 and havent changed gears (yet) wating to go to 35" then change
    Watch "How to Choose Your Axle Gear Ratio" on YouTube
    https://youtu.be/oDVpyhKEbaw
     
    jgcaps likes this.
  7. Sep 28, 2018 at 10:53 AM
    #7
    szuyung3000

    szuyung3000 New Member

    Joined:
    Apr 26, 2018
    Member:
    #5906
    Messages:
    65
    Gender:
    Male
    First Name:
    SYH
    Vehicle:
    2016 4runner SR5 4x4
    re-gear to compensate for the new tire size and weight. I get it. It is to retain factory like feel ride.
     
  8. Sep 28, 2018 at 10:55 AM
    #8
    szuyung3000

    szuyung3000 New Member

    Joined:
    Apr 26, 2018
    Member:
    #5906
    Messages:
    65
    Gender:
    Male
    First Name:
    SYH
    Vehicle:
    2016 4runner SR5 4x4
    Is it more important to change the gearing if the tire is bigger in diameter or if the tire is heavier? Or are both factor equally important?
    I know heavier tires you'll need more torque to turn it.
     
  9. Oct 1, 2018 at 9:17 AM
    #9
    JosephMehta

    JosephMehta New Member

    Joined:
    Apr 18, 2018
    Member:
    #5854
    Messages:
    118
    Gender:
    Male
    Vehicle:
    Zombocalypse
    Shrockworks Front Bumper, CBI Rear Swing Away with dual Jerry Cans and full size spare, Full Shrockworks Armor, Warn 9.5 Synthetic, PIAA Lighting on roof rack and front bumper, Rear lighting wired to vehicle's reverse gear, Dobisons dual slide out rear bay storage with sliding top and refrigerator tie-downs, Limb Risers, Gobi Rack w/mounted Powertank, Fire Extinguisher, Jack, Axe, and Shovel, 33" Nitto Grapplers (295/70/17), Body Mount Chop, Icon Stage 7 Billet w/S2 Stage 3 Secondary adjustable front suspension, 3.5 inch Icon Stage 7 Billet with Billet Upper and Lower Links, Icon Bump Stop, 3.0 inch Icon Overland Rear Coils, ARB Front and Rear Air Locker with ARB Differential Breather (relocated to engine bay), ARB Twin Compressor mounted in engine bay, 360 degree, 4-camera system with DVR with monitor mounted on the dash, Dual Rear Headrest Monitors w/DVD and gaming capability Future mods in 2019: Magnusson Supercharger w/Catback system and possibly an roof mounted, solar heated shower and water storage
    While I can't tell you if one change (re: bigger diameter, heavier tire) is as equally important as the other, re-gearing is more a factor of a number of things than one thing; personal preference is also one of those factors. I re-geared with the installation of 33-inch tires, but not because I had to. I re-geared (to 4.88) because my vehicle is also nearly 2000 lbs heavier than stock. I don't drive fast on the highway but wanted more power from the stopped positions. (I say that loosely, because, even re-geared, I'm not winning any races in my truck.) What re-gearing did for me, however, was to keep my engine RPMs at relatively the same levels as stock relative to certain speeds, which also keeps the speedometer accurate (yes, the larger the tire, the greater the potential your speedometer is not giving true speed); helped to maintain a more stock throttle response; helped to minimize loss in fuel economy, and to remove a sliver of the sluggishness the larger tires, and extra weight gave to me.

    In the end re-gearing is done for the purposes I've stated, but most 4Runners will not need it unless you get above 33-inch tires and/or have a lot of extra weight to stock. Had my truck not had nearly 2000 lbs of extra weight, doubtful I would have re-geared, even with 33-inch tires.
     
    Backslider likes this.
  10. Oct 1, 2018 at 10:04 AM
    #10
    ruiz4251

    ruiz4251 "but it was funny huh?"

    Joined:
    Aug 24, 2018
    Member:
    #6877
    Messages:
    1,421
    Gender:
    Male
    First Name:
    George
    TEXAS
    Vehicle:
    16 Trail Premium
    ICON custom stage 6 3"; 33's; gobi rack; SSO bumper; SSO high clearance; Rigid lights; 10k X2o winch; AFe intake; brola cat back; tint; aftermarket sound; opor sliders; pedal commander, viper smart start mobile tracker, Canvasback Liner; Rago rear window molles; victory 4x4 center console molle; cbi front skid steel; cbi aluminum tran skid; rci fuel aluminum skid; rci dif skid; rago rear shock skids; rci lower link skids; tenton workshop shift knob; yoga shop grenade trans knob;alpha rex headlights; USR blacked out tails; USR turns to turns; blacked out sequential mirror turn
    somewhat agree joseph.
     
  11. Oct 1, 2018 at 6:20 PM
    #11
    szuyung3000

    szuyung3000 New Member

    Joined:
    Apr 26, 2018
    Member:
    #5906
    Messages:
    65
    Gender:
    Male
    First Name:
    SYH
    Vehicle:
    2016 4runner SR5 4x4
    Are you fucking kidding me?!?!? You have nearly 2,000 lb more extra weight than factory stock 4runner weight?? Wow. Front steel bumper and rear steel bumper and everything else adds up I bet. No wonder why you need more torque. Otherwise if you didn't re-gear you probably have no power during take-off from a stop.
     
  12. Oct 8, 2018 at 5:15 PM
    #12
    JosephMehta

    JosephMehta New Member

    Joined:
    Apr 18, 2018
    Member:
    #5854
    Messages:
    118
    Gender:
    Male
    Vehicle:
    Zombocalypse
    Shrockworks Front Bumper, CBI Rear Swing Away with dual Jerry Cans and full size spare, Full Shrockworks Armor, Warn 9.5 Synthetic, PIAA Lighting on roof rack and front bumper, Rear lighting wired to vehicle's reverse gear, Dobisons dual slide out rear bay storage with sliding top and refrigerator tie-downs, Limb Risers, Gobi Rack w/mounted Powertank, Fire Extinguisher, Jack, Axe, and Shovel, 33" Nitto Grapplers (295/70/17), Body Mount Chop, Icon Stage 7 Billet w/S2 Stage 3 Secondary adjustable front suspension, 3.5 inch Icon Stage 7 Billet with Billet Upper and Lower Links, Icon Bump Stop, 3.0 inch Icon Overland Rear Coils, ARB Front and Rear Air Locker with ARB Differential Breather (relocated to engine bay), ARB Twin Compressor mounted in engine bay, 360 degree, 4-camera system with DVR with monitor mounted on the dash, Dual Rear Headrest Monitors w/DVD and gaming capability Future mods in 2019: Magnusson Supercharger w/Catback system and possibly an roof mounted, solar heated shower and water storage
    No, I'm not kidding (you).
     

Products Discussed in

To Top