2025 Limited Wheels? Fit a 5th Gen?

Does anyone have specs for the wheels offsets etc? Looking at putting the 2025 Limited Wheels on my 5th Gen

 

Hope this helps - https://trail4runner.com/2021/02/05/factory-5th-gen-4runner-wheel-options/

 

Thnx. But I am looking at the 2025 6th Gen Limited Wheels

 

No real technical info has been released yet by Toyota. You'll know it when it happens because it will get posted everywhere.

But consider looking at new Tacomas for comparison because new 4Runner will have same frame, same engine, and probably same tires/wheels.

The 'crash bars' comment in this video is interesting because he said they didn't want to touch that stuff since they believe it's an important part of safety ratings and all that.

But in the MOAB Edition video for Land Cruiser, they said they cut those safety bars off for their tire mods.

https://youtu.be/Zn2Idf8hBNI?si=gZEIs-iEPvHi_3_V&t=20

 

Does anyone know if the 2025 Land Cruiser wheels will fit my 18 SR5?
There's a local set for sale. The seller says "6X139.7mm (6X5.5") bolt pattern" I'm not sure of the offset.
And from the link from the second post it appears it's the same bolt pattern.

 

My understanding is the 2025’s have a smaller center bore.

 

Was going to say this.

This is my understanding as well, I've seen this discussed in a few other groups, one person bought them ahead of time and then realized that they would not fit.

 

No, they will not unless you increase the 95mm center bore to 106.

 

Darn! oh well.

There's a local set of black TRD Pro wheels from a 2023. What would be a fair price for them? They are asking 1400

 

less than half that, you can buy them new in boxes for 800

 

you can take a larger bore and fit it to a smaller bore (this is not advisable if the difference is too big since)

(if the difference isnt that much, just use a hub centric ring to ensure you mount the wheels correctly, but your best bet is to use wheels made for the bore size to ensure you minimize the chance of out of balance wheels/tires. the reason you use a hub ring is to center the wheel to the bore, using the studs to center a wheel will always be out of balance in newer toyota's).

you can NOT take a smaller bore and fit it to a larger bore