2008 Tow Wiring Connection with no tow package

So I am a few days away from owning a 2008 4R
without a tow package and want to know if there will be
a factory tow wiring connection on it somewhere
and if yes where will it be located

 

hey man, what else comes on the truck? is the vehicles tow ready i.e.upgraded radiator and alternator if is then you will need the wiring harness and a hitch. however, if it's not tow ready with a tow prep package then you'll need some other goods. bigger radiator, alternator, wiring kit and hitch.
also, what kind of towing we talking bout here?

 

no tow package so I really just want to know if there is
a factory wiring connection point to tie into or whether it has to be spliced in
will be towing a 17ft skiff

 

I get it... no tow package but tow prep package
and tow package are 2 different things. n-e-way, short answer yes the connection should be the under dash. buy a kit and run the wires. keep in mind, you probably want to upgrade the radiator and alternator too. visit etrailer on the line for the harness. hope this helps

 

So I picked up my T4R yesterday and found out there is a round trailer jack right near the rear bumper and since I already had the adaptor from my Explorer I tried it out on my boat and everything is good
So check one thing off the list..... now I will decide whether to have the class 3 installed or do it myself for half price
Amazon has it for $103

 

i am going to be towing my boat just shy of 100 miles soon. will only do that twice a year, with very short ramp trips in between. that will be the total amount of towing, unless i get roped into something else haha. do i need to upgrade the radiator or install a cooler or something along those lines? i am pretty engine ignorant; what is the upgraded alternator for? TIA