1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

When to change oil after used 4Runner purchase?

Discussion in '5th Gen 4Runners (2010-2024)' started by ChrisX, May 20, 2023.

  1. May 20, 2023 at 12:09 PM
    #1
    ChrisX

    ChrisX [OP] New Member

    Joined:
    May 20, 2023
    Member:
    #32979
    Messages:
    12
    I bought a used 4 runner 5 gen, i was looking at changing the oil.

    I don't know when the oil was changed last the oil looks new there are no service stickers or anything on the windows.

    Should i just change it? I do not see a oil life left indicator in the dash, i found one in the radio settings but it is empty.

    Also any tips on how to get a good reading on the dip stick? As it seems to smear when you take it out.
     
  2. May 20, 2023 at 12:25 PM
    #2
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    I would, because…why not? It would also give you a chance to get up close and personal with it. If it has stripped out skid plate bolts or is missing skid plates, then you know it’s been serviced:laugh:

    Reading the dipstick is easiest after it’s been sitting a while, on the first pull. Once you do it twice, it starts to get all smeared.

    Get yourself a good filter wrench that grabs the tabs of the filter housing.

    Congrats on the 4runner! How many miles?
     
    Sleestaks and 4Runner75 like this.
  3. May 20, 2023 at 12:29 PM
    #3
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,620
    Just change it at the next 5k interval and then every 5k thereafter.

    Regarding getting a good reading on the dipstick Ive heard two strategies. One is to pull the dipstick out and press it against a paper towel and then see where the oil has marked the paper towel. Another tip is to pull the dipstick out of the tube and leave the tube to drain completely before taking a reading.
     
    steelevo and rmiked like this.
  4. May 20, 2023 at 12:37 PM
    #4
    TrailGuy2016

    TrailGuy2016 New Member

    Joined:
    Mar 11, 2021
    Member:
    #20262
    Messages:
    312
    Gender:
    Male
    Vehicle:
    2016 Trail Premium, Silver
    Raptor lights, TRD front grille, RCI Metalworks skid plates
    Pull it out and in a few times, and then remove it for 1/2 hour. The level reading is perfect after that. I have not burned a drop ever, between 57k and 108k.
     
  5. May 20, 2023 at 12:48 PM
    #5
    ChrisX

    ChrisX [OP] New Member

    Joined:
    May 20, 2023
    Member:
    #32979
    Messages:
    12

    20K miles it does have all the skid plates i went under it and checked before i bought it.

    I have one of these as i have a tundra and it's uses what looks to be the same filter housing.

    https://www.amazon.com/gp/product/B00XTAGHU0?ie=UTF8
     
  6. May 20, 2023 at 12:51 PM
    #6
    ChrisX

    ChrisX [OP] New Member

    Joined:
    May 20, 2023
    Member:
    #32979
    Messages:
    12
    I am tempted but i am one of them people that likes and swears by only one brand of oil. :)

    Besides i wonder what oil/filter they used could be garbage.
     
  7. May 20, 2023 at 2:04 PM
    #7
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s

    Those motivex tools used to have the slots to grab the ears, so it has an absolute lock on the housing. But I’ve heard the new ones don’t. It shouldnt be a problem as long as you make sure it’s seated on well before loosening the housing.


    NAPA still makes a wrench with the slots on it. But it costs like 40 bucks or so.
     
  8. May 20, 2023 at 2:05 PM
    #8
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,620
    I ‘m sorry Chris, but once my opinion has been rendered it must be followed. By asking the question you have surrendered all autonomy.

    As for the quality of the oil, haven’t you tasted it?
     
    Ironguy, RumHamRunner73 and Tama1968 like this.
  9. May 20, 2023 at 3:38 PM
    #9
    ChrisX

    ChrisX [OP] New Member

    Joined:
    May 20, 2023
    Member:
    #32979
    Messages:
    12
    Mine does not lock on the ears only the bottom part of the housing, i did get it off but whoever did it last had it so tight i had to use a impact wrench. It looked like the oil had been changed but not the filter.

    What is the metal clip on the filter housing for anyway?

    I don't really like how that filter housing works what is wrong with a spin on filter. Took me like 2 hours to change. That TRD skid plate is a pain to align by yourself.
     
  10. May 20, 2023 at 3:38 PM
    #10
    ChrisX

    ChrisX [OP] New Member

    Joined:
    May 20, 2023
    Member:
    #32979
    Messages:
    12
    Not tasted but i did give it the smell test. :)
     
  11. May 20, 2023 at 3:41 PM
    #11
    ChrisX

    ChrisX [OP] New Member

    Joined:
    May 20, 2023
    Member:
    #32979
    Messages:
    12
    The Manuel calls for 6.6 quarts i put in 6 and its to the middle of the dip stick.
     
  12. May 20, 2023 at 3:43 PM
    #12
    Ironguy

    Ironguy New Member

    Joined:
    Dec 22, 2019
    Member:
    #12421
    Messages:
    6,230
    Gender:
    Male
    First Name:
    Ralph
    Bisbee AZ
    Vehicle:
    2020 Black 4Runner Venture 1967 FJ40 Land Cruiser
    New pine scent hanger, new sun shade
    Welcome and enjoy the dreaded oil change especially the TRD skid plate. There are other much better options and you can find them here.
     
  13. May 20, 2023 at 3:48 PM
    #13
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,620
    I can’t believe you changed it against my advice! This is going to mean trouble.

    Did you torque the oil filter housing and oil filter housing drain plug? If you did your next oil change will be a breeze.
     
    Last edited: May 20, 2023
  14. May 20, 2023 at 3:49 PM
    #14
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s

    Have you noticed the plates have little hooks so you can hang them first, and then tilt them up? They’re quite handy.
     
  15. May 20, 2023 at 3:51 PM
    #15
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Please go easy on him! He didn’t know!
     
  16. May 20, 2023 at 3:56 PM
    #16
    ChrisX

    ChrisX [OP] New Member

    Joined:
    May 20, 2023
    Member:
    #32979
    Messages:
    12
    I thought that was only on the stock plates?
     
  17. May 20, 2023 at 4:00 PM
    #17
    ChrisX

    ChrisX [OP] New Member

    Joined:
    May 20, 2023
    Member:
    #32979
    Messages:
    12
    actually i did found the specs on a forum. I need a better torgue wrench mine is 1/2 not sure if a adapter affects the setting.
     
  18. May 20, 2023 at 4:01 PM
    #18
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    It’s a good idea, so maybe other skid plates have them. But I know my stock steel ones have hooks on the front and rear skid.
     
  19. May 20, 2023 at 4:10 PM
    #19
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,620
    Wait a minute. I have a certain standing on this board. When a new guy posts up asking for advice, I offer it, and he doesn’t take it - well that tarnishes the sterling reputation of my bogus anonymous online persona. I can’t sit still for that. There will be retribution.

    Chris, via your IP address I’m going to find out where you live. Then, in the middle of the night I will alight on your 4Runner, dressed in ninja garb, and perform a stealthy secret oil change, and I will use generic unbranded convenience store oil. And the most diabolical part: you won’t even know it happened! Think of it! Your your 4Runner running for months on inferior oil. Muahahahaha!
     
  20. May 20, 2023 at 4:23 PM
    #20
    OverRunner

    OverRunner rebmeM weN

    Joined:
    May 2, 2021
    Member:
    #21242
    Messages:
    293
    Gender:
    Male
    First Name:
    Jared
    Denton, TX
    Vehicle:
    ‘21 ORP w/KDSS
    A simple 1/2” -> 3/8” reducer is linear and (assuming it’s not complete garbage) shouldn’t affect the reading.
     
    Captain Spalding likes this.
  21. May 20, 2023 at 4:41 PM
    #21
    ChrisX

    ChrisX [OP] New Member

    Joined:
    May 20, 2023
    Member:
    #32979
    Messages:
    12

    Just the thought of that is like finger nails down a chalk board!

    unbranded oil!!! what a night mare.
     
  22. May 20, 2023 at 5:03 PM
    #22
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s

    I tried Chrisx, but I should have known better. The three-toed shoe wearing ninja’s been let loose!
     
    Captain Spalding likes this.
  23. May 20, 2023 at 5:07 PM
    #23
    Foothills

    Foothills New Member

    Joined:
    Nov 2, 2022
    Member:
    #29388
    Messages:
    274
    Congrats on the new 4runner Chris, ya'll might look into TRD oil filters and 5W30 oil before next change.
     
  24. May 20, 2023 at 5:12 PM
    #24
    j cat

    j cat New Member

    Joined:
    Jun 28, 2016
    Member:
    #2223
    Messages:
    854
    massachusetts
    spacer lift front 1inch
    my 4runner 2016 new is the 7K-8K miles of the engine oil change. my runner is dropping a 1/3 of a QT...on the stick then the oil is very good LT yellow color ..
    the oil engine was out around 1 hr.....engine was hot engine oil dropped it ..I did the Mobil 0-20wt synthetic around 6 qts a little ....
    also grease the drive shafts and the yoke
     
  25. May 20, 2023 at 5:50 PM
    #25
    08TXRunner

    08TXRunner New Member

    Joined:
    Feb 17, 2020
    Member:
    #13179
    Messages:
    929
    Gender:
    Male
    Vehicle:
    '20 SR5P
    Always follow what Manuel tells you.
     
    TrailGuy2016 and Guppy1301 like this.
  26. May 21, 2023 at 4:35 AM
    #26
    ChrisX

    ChrisX [OP] New Member

    Joined:
    May 20, 2023
    Member:
    #32979
    Messages:
    12
    I have found that using the exact amount the manuel calls for fills it to much. Maybe from some of the previous oil still being in the system BUT the manuel says oil level between 1-3 is normal.

    oil.jpg
     
  27. May 22, 2023 at 4:09 AM
    #27
    Guppy1301

    Guppy1301 New Member

    Joined:
    Jan 2, 2023
    Member:
    #30386
    Messages:
    101
    Gender:
    Male
    Vehicle:
    Silver 2019 TRD ORP
    Bilstein 6112/5100 TSO bumper Rokmen rear LCA Northstar x2 Voltage pro booster
    You are going to believe the dipstick as compared to how much the manual tells you to put in? If you changed the filter and only put 6 quarts in then you are .6 of a quart low no matter what the dipstick says.
     
  28. May 22, 2023 at 11:05 AM
    #28
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,620
    Hmm. I consider both the dipstick and the manual to be equally authoritative. I wouldn’t be so quick as you to favor one over the other.
     
    08TXRunner likes this.
  29. May 22, 2023 at 11:30 AM
    #29
    EC15

    EC15 ...

    Joined:
    May 10, 2022
    Member:
    #27013
    Messages:
    123
    Gender:
    Male
    Manual gives me an idea, but the dipstick has the final say.
    The manual doesn't know what didn't drain out.

    I would do an oil change right away on a used car regardless.
     
  30. May 22, 2023 at 11:34 AM
    #30
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    You got it backwards! The dipstick is the truth on the ground. That is the final check. Remember, it’s problem to be .6 over the top dipstick level, but it’s not a problem whatsoever to be anywhere between the top dot and bottom dot. So going by only the book estimated values is not the right way to do it.
     
    Captain Spalding likes this.

Products Discussed in

To Top