1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Mar 28, 2023 at 5:49 AM
    TN_FunRunner

    TN_FunRunner New Member

    Joined:
    Feb 17, 2018
    Member:
    #5502
    Messages:
    444
    Gender:
    Male
    First Name:
    Jay
    W. TN
    Vehicle:
    2018 TRD ORP, 2007 SR5 4WD
    I used the 10A for the Tail lights (tail) under driver side dash. They only come on with lights.
     
  2. Mar 28, 2023 at 6:06 AM
    Marco

    Marco New Member

    Joined:
    Mar 28, 2023
    Member:
    #32022
    Messages:
    3
    Gender:
    Male
    PNW
    Vehicle:
    2021 TRD Off Road
    Thanks! The harness I got wasn't long enough to reach the cabin fuse box and I was trying to use the engine bay box and not add another connection to extend the harness. I suppose I'll just do that.
     
    TrailSpecial22 likes this.
  3. Mar 28, 2023 at 11:07 AM
    greg8765

    greg8765 New Member

    Joined:
    Jun 28, 2021
    Member:
    #22132
    Messages:
    74
    First Name:
    Greg
    Utah
    Vehicle:
    2021 SR5 4Runner
    love the blacked out look
     
  4. Mar 28, 2023 at 11:14 AM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,105
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    has anyone noticed the change in the filter pleating on the Fran synthetic oil filter, if you use Fram, (XG10158) recently?

    The new ones have a fuzzy cotton look to them compared to the one I bought in Nov 2022. Weird…
     
  5. Mar 28, 2023 at 3:09 PM
    MusashiSushi

    MusashiSushi New Member

    Joined:
    Jan 5, 2023
    Member:
    #30456
    Messages:
    119
    Gender:
    Male
    First Name:
    Jeff
    Colorado Springs, CO
    Vehicle:
    2023 4Runner SR5 Premium Black/Black
    Elka 2.5 DC 3" lift, SPC UCA's, Toytech rear springs, ARB Diff Breather, RSG Rock Sliders & front Skid. C4 front bumper with High Clearance sides and Warn Winch.
    Today was just a washing but yesterday I was finally able to get up to R4T in Denver and had a complete set of Elka's installed giving it a 3" lift along with SPC UCA's, 700lb Toytech rear springs, ARB Diff breather, bump stops, and KMC 17" wheels with Mickey Thompson Baja Boss A/T's mounted in 285/70R17's. Looks and rides so much nicer now!
     
  6. Mar 28, 2023 at 3:11 PM
    dgrenier15

    dgrenier15 New Member

    Joined:
    Feb 27, 2023
    Member:
    #31489
    Messages:
    248
    Gender:
    Male
    First Name:
    Dayne
    Oklahoma
    Vehicle:
    2022 AG TRD ORP
    I will "like" this when we see PICTURESSSSS!
     
  7. Mar 28, 2023 at 3:23 PM
    MusashiSushi

    MusashiSushi New Member

    Joined:
    Jan 5, 2023
    Member:
    #30456
    Messages:
    119
    Gender:
    Male
    First Name:
    Jeff
    Colorado Springs, CO
    Vehicle:
    2023 4Runner SR5 Premium Black/Black
    Elka 2.5 DC 3" lift, SPC UCA's, Toytech rear springs, ARB Diff Breather, RSG Rock Sliders & front Skid. C4 front bumper with High Clearance sides and Warn Winch.
    Ok, giving this a try.
    [​IMG]
     
  8. Mar 28, 2023 at 3:26 PM
    MusashiSushi

    MusashiSushi New Member

    Joined:
    Jan 5, 2023
    Member:
    #30456
    Messages:
    119
    Gender:
    Male
    First Name:
    Jeff
    Colorado Springs, CO
    Vehicle:
    2023 4Runner SR5 Premium Black/Black
    Elka 2.5 DC 3" lift, SPC UCA's, Toytech rear springs, ARB Diff Breather, RSG Rock Sliders & front Skid. C4 front bumper with High Clearance sides and Warn Winch.
  9. Mar 28, 2023 at 4:20 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,105
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    hell yeah!!!
     
    MusashiSushi[QUOTED] likes this.
  10. Mar 28, 2023 at 4:57 PM
    Blu’s Dad

    Blu’s Dad New Member

    Joined:
    Mar 19, 2023
    Member:
    #31841
    Messages:
    16
    Gender:
    Male
    Northern Virginia
    Vehicle:
    2020 Limited
    Finally got around to installing running boards. upload_2023-3-28_19-56-43.jpg
     
  11. Mar 28, 2023 at 5:06 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,105
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    nice, do the retract!
     
  12. Mar 28, 2023 at 5:27 PM
    Ripmo

    Ripmo New Member

    Joined:
    Sep 17, 2021
    Member:
    #23392
    Messages:
    100
    Gender:
    Male
    First Name:
    Mike
    Colorado
    Vehicle:
    2022 Lunar Rock ORP
    Bilstein 5100 2” front Bilstein 5100 rear w/ 1” Cornfed spacer Sherpa Crestone roof rack RCI Skids and sliders Ironman UCA’s
    Finally got around to installing the Ironman UCA’s I bought during the Black Friday sale. When I got an alignment after installing my lift, the shop was only able to get my caster to 2.6°, and it required more steering input on the highway than I liked.

    I have the lifetime alignment from Firestone, so I decided to go back again for this alignment. I don’t have a lot of confidence in their abilities after today, at least at my local shop. When they called to say the alignment was done they told me they got camber and toe in spec but couldn’t get caster below 4.2°. I asked if that meant they adjusted the LCA cam bolts for least caster and they said the only way they would be able to get less would be to rotate the UCA ball joint which would be an extra $100 as it’s not part of their lifetime alignment. I don’t have SPC’s so I’m not sure what they were thinking they would be able to rotate. I also looked and saw they didn’t adjust the cam bolts. At least I the steering feels better and I know I now have good caster and body Mount clearance for when I upsize tires.
     
  13. Mar 28, 2023 at 5:45 PM
    nimby

    nimby in the drink

    Joined:
    Mar 27, 2017
    Member:
    #3777
    Messages:
    4,453
    First Name:
    Jake
    California
    Vehicle:
    2018 SR5P
    I wouldn't count on those UCA's giving you more body mount clearance.

    This video explains why starting at 6:08

    https://www.youtube.com/watch?v=huMztKaHsUE&t=382s
     
    5six and SlvrSlug like this.
  14. Mar 28, 2023 at 6:37 PM
    Ripmo

    Ripmo New Member

    Joined:
    Sep 17, 2021
    Member:
    #23392
    Messages:
    100
    Gender:
    Male
    First Name:
    Mike
    Colorado
    Vehicle:
    2022 Lunar Rock ORP
    Bilstein 5100 2” front Bilstein 5100 rear w/ 1” Cornfed spacer Sherpa Crestone roof rack RCI Skids and sliders Ironman UCA’s
    My comment about body mount clearance wasn’t relating to the UCA’s themselves. I was just referring to the LCA cam bolts being in the position where the tires are about as far forward as possible. I meant this as opposed to the alternative of being at around 4° caster with the LCA’s adjust to position the wheel further back due to the UCA’s having too much additional caster built in.
     
  15. Mar 29, 2023 at 12:13 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,605
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter *NOW FRAM EXTRA GUARD CA10835 -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    @Ripmo Interesting. You're a little more knowledgeable than I. But see below just for comparison sake. Last week achieved these alignment measurements at local offroad shop w/ SPC UCA's (3" lift, 285/70R17). Gotta BMC done recently too for clearance. Good luck

    IMG_20230317_175643334.jpg
     
    Dabigono and TrailSpecial22 like this.
  16. Mar 29, 2023 at 4:28 AM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,105
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    those specs look good imo
     
  17. Mar 29, 2023 at 6:33 AM
    dgrenier15

    dgrenier15 New Member

    Joined:
    Feb 27, 2023
    Member:
    #31489
    Messages:
    248
    Gender:
    Male
    First Name:
    Dayne
    Oklahoma
    Vehicle:
    2022 AG TRD ORP

    I LIKE THAT! Very solid set up! The all black look is stellar without it being completed murdered out!
     
  18. Mar 29, 2023 at 7:34 AM
    MusashiSushi

    MusashiSushi New Member

    Joined:
    Jan 5, 2023
    Member:
    #30456
    Messages:
    119
    Gender:
    Male
    First Name:
    Jeff
    Colorado Springs, CO
    Vehicle:
    2023 4Runner SR5 Premium Black/Black
    Elka 2.5 DC 3" lift, SPC UCA's, Toytech rear springs, ARB Diff Breather, RSG Rock Sliders & front Skid. C4 front bumper with High Clearance sides and Warn Winch.
    Thanks!
     
  19. Mar 29, 2023 at 9:30 AM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,105
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    Gave her some TLC today, wash, wax and vacuum.

    2BF8D391-48CA-4544-A250-420F7229CDE6.jpg
    91457762-EC41-4F36-BC38-015BD24FE856.jpg
     
  20. Mar 29, 2023 at 9:42 AM
    kmeeg

    kmeeg LionRunner

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    4,622
    Gender:
    Male
    Congratulations @MusashiSushi . as dgrenier15 mentioned absolutely love the setup. Love that it cleared everything without having to cut and chop. I'm a huge fan of keeping the mud flap. Can't wait to hear what you think after you take it may be on Rampart range or some rough road. :yes:
     
  21. Mar 29, 2023 at 10:20 AM
    2016SR5P

    2016SR5P New Member

    Joined:
    Aug 2, 2022
    Member:
    #28038
    Messages:
    99
    Gender:
    Male
    Vehicle:
    2016 SR5 Premium Super White 4WD
    looks amazing
     
  22. Mar 29, 2023 at 11:11 AM
    SLVRFOX4R

    SLVRFOX4R New Member

    Joined:
    Mar 24, 2023
    Member:
    #31948
    Messages:
    15
    Gender:
    Male
    First Name:
    Chris
    New England
    Vehicle:
    2015 Toyota 4Runner Trail Edition Premium W/ KDSS
    Dobinsons IMS, Dobinsons UCA, Freedom LCA, 285/70/17 Yokohama Geolandar G003
    I'll get some measurements today to double check. I don't have the knowledge, patience, tools, or space (Boston) to install myself so I had a local vet owned one-man-shop install.

    It was quite a process...he originally had the front an inch or so higher to account for settling. With the front sitting higher the tech that was doing my alignment said the machine couldn't get a read so we had to lower the front to match the back (had never heard of this happening before). Fast forward a week and the front ended up settling a good 1.5" so we then cranked it back up to make it level.

    I never went back and measured...just took his word on it so I guess that one is on me. I'll be interested to see what the actual ride height is compared to yours. How many inches are you from the ground to the bottom of your fender/wheel well?
     
  23. Mar 29, 2023 at 11:16 AM
    SLVRFOX4R

    SLVRFOX4R New Member

    Joined:
    Mar 24, 2023
    Member:
    #31948
    Messages:
    15
    Gender:
    Male
    First Name:
    Chris
    New England
    Vehicle:
    2015 Toyota 4Runner Trail Edition Premium W/ KDSS
    Dobinsons IMS, Dobinsons UCA, Freedom LCA, 285/70/17 Yokohama Geolandar G003
    I'll have to get a measure on it tonight and report back. I was under the assumption it was (did not install myself) but @djwantke pointed out the same...
     
  24. Mar 29, 2023 at 11:17 AM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,105
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    thank you!
     
  25. Mar 29, 2023 at 11:18 AM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,105
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    if you raised it back up your alignment will be off.
     
  26. Mar 29, 2023 at 11:28 AM
    SLVRFOX4R

    SLVRFOX4R New Member

    Joined:
    Mar 24, 2023
    Member:
    #31948
    Messages:
    15
    Gender:
    Male
    First Name:
    Chris
    New England
    Vehicle:
    2015 Toyota 4Runner Trail Edition Premium W/ KDSS
    Dobinsons IMS, Dobinsons UCA, Freedom LCA, 285/70/17 Yokohama Geolandar G003
    Had it realigned after it was raised back up. The alignment was so off after the lift install that I had to have it towed from the guys house to the local tire shop. After it was raised back up it was aligned again when I put the new tires on.
     
  27. Mar 29, 2023 at 12:10 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,105
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    :yes:
     
  28. Mar 29, 2023 at 12:24 PM
    11x

    11x New Member

    Joined:
    Mar 3, 2023
    Member:
    #31542
    Messages:
    17
    Gender:
    Male
    Vehicle:
    2019 trd limited
    Guy at work wants to trade me a set of these for my stockers. I am in a 19 trd orp. Did you have any rubbing issues?
     
  29. Mar 29, 2023 at 1:44 PM
    beedee

    beedee Member

    Joined:
    Sep 18, 2020
    Member:
    #16818
    Messages:
    292
    Vehicle:
    2018 4R SR5 4x4 Nautical Blue Metallic
    Need to order engine splash guards. Notice the left front one somehow ripped a week or so ago. I have no interest in the baller ones though.
     
  30. Mar 29, 2023 at 4:30 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,605
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter *NOW FRAM EXTRA GUARD CA10835 -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    @SLVRFOX4R thanks for the details, great to know. I will measure my ride height from ground to fender tonight! I feel like ima little low and desire more height lol. I wonder if my suspension settled? Can someone explain. And how would I "crank" it up as you say?
    My only adjustment is 5100 spring seat grooves and the only increment I'd be willing to try is the first click up 0.75" (I hear any higher on top of 3" OME lift springs doing the lifting will result in harsh ride)
     
    Last edited: Mar 29, 2023

Products Discussed in

To Top