What have you done to your 5th Gen 4Runner today?

They look similar to my Nilight pods I had on my TRD ORP. Any mod I do I'm happy for a while but soon feel it could have been better.

 

Installed diode dynamics fog lights, map and dome interior lights. All are major upgrades over stock. Also fresh oil change.

 

Well, thats how my weekend started.
Changing fog light housings on my Limited. One side almost done. One broken plastic piece. I hate this Limited bumper design..

 

No more scratches. About $26 off of Amazon.

 

Seat jackers and Raptor lights today

Jackers are awesome

 

Lot of work done today. Cat shield would be the last for today. Lot of videos to edit. Would take a while when editing is done. Here a pic for now.

 

Put in

$128 Husky Liners Weatherbeater Floor Mats | Fits 2010-2012 Toyota 4Runner, 2010-2013 Lexus GX460 | Front & 2nd Row, 3-pc Black - 98571

Husky P/N 98571 floor liners. Material is about half the thickness of Weathertech, but coverage looks to be better around the gas pedal area:

 

I'm considering one of these too.

How does it do with:

- Glare?

- polarized Sunglasses?

 

I installed my LFD crossbars on my 5th gen Toyota 4Runner today. I also installed the Maxtrax mounting pins in order to get the Maxtrax up on the roof.

Installing the mounting pins was a pain, but that's probably got more to do with how I had to dig up the right (or right enough) tools, the nuts are nylon lock nuts, the bolts coming from the bottom of the pins are really long (thankfully not too long but I had to use a deep socket), and doing the appropriate spacing between the bars.

Removing the stock crossbars wasn't too bad, but it was kind of annoying. Installing the new bars themselves was largely fine. The integrated wind fairing front crossbar turned out to be really easy to install even though the way you have to slot in some of the hardware into the factory roof rails is weird. I positioned it as far to the front as I could comfortably get it. The weather stripping doesn't seem to be concerningly tight on the paint. I actually left a towel between it and the paint, and I was able to shimmy the towel out without using too much force. The double wide rear crossbar took a little doing and redoing since I had to get the distance spaced out properly for the Maxtrax to mount, but it wasn't that bad. I just had to redo one of the bits of hardware in the side rail, and even that wasn't a big deal.

I gave it a test drive earlier, and everything seems to be holding together perfectly. I also stopped by the hardware store on the way home and got some basic locks and slip joint pliers to help me with turning the parts of the mounting tabs that secure or unsecure the Maxtrax. They're actually very hard to turn with just your fingers, so I got the pliers just to keep in my 4Runner primarily for this purpose.

There's a decent amount of space between the crossbars and the roof. I'll have to see if I can install my Rotopax mount without removing the rear double wide crossbar. I got that, the water Rotopax containers, and some other odds and ends from Desert Rat yesterday. I haven't even opened the box yet. I went RC racing last night, and I've had my hands full since this morning.

Using this wheel-mounted step thing and my LFD rock sliders really helped with the installation a lot. I was able to stand where I needed to be to do everything. Of course, I am by no means a professional. After I was done, I neglected to remove the step thing and began to back out of my driveway. The step thing got bent a little out of shape, but I think the LFD rock sliders paid off! The only things seriously damaged were the step thing and my pride. I was able to straighten out the step thing tonight, and I'll put it back in my 4Runner tomorrow.

I don't know if I'm going to get to do Mini Z RC racing tomorrow I didn't have time to prepare my cars today. I might even miss some of tonight's National Wrestling Alliance pay per view. I just want to plop down on my bed and sleep.

 

Added this today. Not as straightforward as I had hoped. Still in draft version, soldered an Arduino board and uploaded a simple program loop. Hoping to connect a small speaker to it as well to get the KITT scanner mode sound. I think the LEDs are too bright, so may change program to reduce brightness or try and add a tint film.

 

Mine were the same way. I found that by loosening the hex bolt on the top that you can adjust the amount of force needed to turn them.

 

I played in the mud today on my hunting property brush hogging.

 

Had the tires balanced and then washed the 4Runner. Was having the steering wobble and wanted to see if this would fix it. Seems to have done so. Felt much better and most of the wobble is gone.

Also removed the black wheel skins that came with it when we bought it. Looks much better in my opinion.

 

I thought about messing with that bolt, but I didn't want to risk blowing the whole top off and having my Maxtrax land in someone's face. It's not like I'm going to be using the Maxtrax very much anyway. They're only for crawling out of the most challenging of mall parking lots

 

I wish I had a better answer, but its only been on for a day or so. My sunglasses are prescription and not polarized. I only had my runner out yesterday for a short run around town. I didn't notice any issues. Ill try to update more soon.

 

Don't forget they are great for leveling your truck in the Starbucks parking lot, so your mocha latte doesn't spill...

 

Dude, I'm going to be hauling some serious mocha latte now. I got two of these Rotopax just for the mocha latte. I'm going to have so much mocha latte.



I also got one of these ARB winch dampers and a couple of soft shackles. The soft shackles are inside the pouch of the winch damper. I don't have a winch, but it's still good to put on a kinetic recovery rope thing for when you've got to rescue your mocha latte. With a short test drive, there's no rattling or anything with the winch damper hanging there. I probably wouldn't put anything heavier than the soft shackles in there since it's hanging from the shovel on the Quick Fists, so the D-rings remain elsewhere.

 

Took mine to the N GA mountains for about 20 miles of Forest Service roads. Pic is from the Springer Mountain trailhead parking lot. This is the starting point for the Appalachian Trail. There was some light snow…. Great way to spend part of the day…

Cheers,
Bob

 

Nothing to the 4Runner today. Installed the OEM running boards on the wife's Highlander. Was somewhat nice out and I knew these things would take a bit to install.

 

Got this far on my Ironman 4x4 Raid bumper and realized they sent me the wrong winch control box. I know stuff happens but still frustrating.

Not sure what to do with the fog light wiring harness yet.

 

Changed the oil. Putting on Falken Wildpeak AT3s on Valentine's Day.

 

Sounds like a fun V-Day.

 

Tires last longer than flowers.

 

spent more time in the runner today. I didn't notice any issues with the new screen protector.

 

My 2010 4Runner SR5 came with a dinky single horn. The security alarm uses it, too, without a separate horn near the passenger side firewall.



Replaced it with a set of Hella Supertones P/N 003399801:

 

I changed all the fluids (front differential, rear differential, transfer case, transmission). Installed the RCI Cat guard plates on both side of the transmission skid plate while I had it out. Drove to Lake Cle Elum and walked around the shore with the dog with this nice weather we had today.

 

Ball joint boot blew out & slipped down.
Wheel checks out, no give no play.
Supported steering assembly, cleaned ball & stud, reclipped retainer ring.
Out of the woods for now

 

^The boot is replaceable if needed. The set on my Tacoma tore after two years:

$26 SPC Performance 25477 Ball Joint Boot Replacement Kit

https://www.amazon.com/dp/B00HDFDK48/

 

Thanks buddy, that's right I seen that. Eta Thursday tho if replacement needed. Luckily I have no tears, I must have overdid it on the grease gun like a rookie

 

I watched a guy back in to me. Haven’t made one payment yet