What have you done to your 5th Gen 4Runner today?

The apex mounts don’t hang too low. This person is hanging d shackles on the stock tie down points in addition to having the apex recovery points in place. I’d suggest removing the shackles. The Apex plates add enough “red” look and then the shackles won’t end up rusting or worse come lose on the highway. I liked using soft shackles on the Apex mounts…felt safer.

 

Same here with the combo apex + soft shackles

 

Just thought of comparing drop in LED bulb (Lasfit LA H11) vs factory LED Headlight. (Collecting different cases for my next video)

 

Can ya'll tell me your opinion, do my SPC UCA's look alright to you. Without jacking up and checking the wheel for play. Not that they feel bad yet but they're year & half old. Pics after greasing.
I grease em before or after longer trips. When they appear shrunk in, I fill them up till what I feel is the right swell. But I've never got them to expel old grease out the bottom in real time. Thanks!

 

Look good to me! I grease mine every 5k oil change

 

Was getting annoyed with the lack of organization in the black hole that Toyota calls a canter console! This was a cheap fix that was totally worth it!

https://yotaxpedition.com/products/4runner-center-console-organizer

 

I bought the one with built in wireless charger off Amazon it was about double in prive but what a huge difference!

 

Since were in the cheap thread, I was considering gluing a wireless charger to the bottom. I tested it and it seems to work perfectly!

 

Alpine ILX-507. Looks and sounds amazing.

Had some trouble getting the rear camera to work. So glad I purchased it from Crutchfield. They worked with me for about an hour and got it resolved!

 

So which is better?

 

Installed a full length Prinsu rack (non-drill) today! Super pleased with the way it came out. Fold-flat kayak racks installed right after. It was a good day!

 

Ohh..!! I wasn't planning to decide or tell anything like that on the video as no one with LED housing will go back to Halogen housing with LED bulbs. Atleast I won't. I was planing just to show how much drop in LEDs have improved mimicking LED housing cut off line. May be some where down the line I might buy a stock LED housing and stop my LED light testing.

Let me spend little more time and see how I feel. Very hard to tell.

 

NICE...!!!!!
I'd really like to have a roof rack like that one day. If I get it I would definitely get a single row low profile stupid bright light bar near that wind deflector (or whatever that thing is called).

Edit -
Something like this-

 

Yeah we debated it and opted out of the light bar cutout option in favor of some pod ditch lights that are in the mail on the way right now. Still love the way they look with the light bar for sure!

 

Please share that info too. I was thinking to go for super low profile Baja S1 pods. Not sure if that would be waste of money since they are very small. Can't really judge by the youtube videos.

This one -

 

I’m usually a “name brand” kind of guy, but a buddy of mine has these off brand pods from eBay on his Tacoma and they’re super nice. For the price I couldn’t help it. Worst case I wasted $100 if I don’t like them long term

https://www.ebay.com/itm/1437647048...1uMwiSST-O&var=&widget_ver=artemis&media=COPY

 

They look similar to my Nilight pods I had on my TRD ORP. Any mod I do I'm happy for a while but soon feel it could have been better.

 

Installed diode dynamics fog lights, map and dome interior lights. All are major upgrades over stock. Also fresh oil change.

 

Well, thats how my weekend started.
Changing fog light housings on my Limited. One side almost done. One broken plastic piece. I hate this Limited bumper design..

 

No more scratches. About $26 off of Amazon.

 

Seat jackers and Raptor lights today

Jackers are awesome

 

Lot of work done today. Cat shield would be the last for today. Lot of videos to edit. Would take a while when editing is done. Here a pic for now.

 

Put in

$126 Husky Liners - Weatherbeater | Fits 2010 - 2012 Toyota 4Runner, Fits 2010 - 2013 Lexus GX460 - Front & 2nd Row Liner - Black, 3 pc. | 98571

Husky P/N 98571 floor liners. Material is about half the thickness of Weathertech, but coverage looks to be better around the gas pedal area:

 

I'm considering one of these too.

How does it do with:

- Glare?

- polarized Sunglasses?

 

I installed my LFD crossbars on my 5th gen Toyota 4Runner today. I also installed the Maxtrax mounting pins in order to get the Maxtrax up on the roof.

Installing the mounting pins was a pain, but that's probably got more to do with how I had to dig up the right (or right enough) tools, the nuts are nylon lock nuts, the bolts coming from the bottom of the pins are really long (thankfully not too long but I had to use a deep socket), and doing the appropriate spacing between the bars.

Removing the stock crossbars wasn't too bad, but it was kind of annoying. Installing the new bars themselves was largely fine. The integrated wind fairing front crossbar turned out to be really easy to install even though the way you have to slot in some of the hardware into the factory roof rails is weird. I positioned it as far to the front as I could comfortably get it. The weather stripping doesn't seem to be concerningly tight on the paint. I actually left a towel between it and the paint, and I was able to shimmy the towel out without using too much force. The double wide rear crossbar took a little doing and redoing since I had to get the distance spaced out properly for the Maxtrax to mount, but it wasn't that bad. I just had to redo one of the bits of hardware in the side rail, and even that wasn't a big deal.

I gave it a test drive earlier, and everything seems to be holding together perfectly. I also stopped by the hardware store on the way home and got some basic locks and slip joint pliers to help me with turning the parts of the mounting tabs that secure or unsecure the Maxtrax. They're actually very hard to turn with just your fingers, so I got the pliers just to keep in my 4Runner primarily for this purpose.

There's a decent amount of space between the crossbars and the roof. I'll have to see if I can install my Rotopax mount without removing the rear double wide crossbar. I got that, the water Rotopax containers, and some other odds and ends from Desert Rat yesterday. I haven't even opened the box yet. I went RC racing last night, and I've had my hands full since this morning.

Using this wheel-mounted step thing and my LFD rock sliders really helped with the installation a lot. I was able to stand where I needed to be to do everything. Of course, I am by no means a professional. After I was done, I neglected to remove the step thing and began to back out of my driveway. The step thing got bent a little out of shape, but I think the LFD rock sliders paid off! The only things seriously damaged were the step thing and my pride. I was able to straighten out the step thing tonight, and I'll put it back in my 4Runner tomorrow.

I don't know if I'm going to get to do Mini Z RC racing tomorrow I didn't have time to prepare my cars today. I might even miss some of tonight's National Wrestling Alliance pay per view. I just want to plop down on my bed and sleep.

 

Added this today. Not as straightforward as I had hoped. Still in draft version, soldered an Arduino board and uploaded a simple program loop. Hoping to connect a small speaker to it as well to get the KITT scanner mode sound. I think the LEDs are too bright, so may change program to reduce brightness or try and add a tint film.

 

Mine were the same way. I found that by loosening the hex bolt on the top that you can adjust the amount of force needed to turn them.

 

I played in the mud today on my hunting property brush hogging.

 

Had the tires balanced and then washed the 4Runner. Was having the steering wobble and wanted to see if this would fix it. Seems to have done so. Felt much better and most of the wobble is gone.

Also removed the black wheel skins that came with it when we bought it. Looks much better in my opinion.

 

I thought about messing with that bolt, but I didn't want to risk blowing the whole top off and having my Maxtrax land in someone's face. It's not like I'm going to be using the Maxtrax very much anyway. They're only for crawling out of the most challenging of mall parking lots