1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Cussing on Christmas Eve: cracked TRD Pro Roof Rack Plastic Bracket

Discussion in '5th Gen 4Runners (2010-2024)' started by Connor MacLeod, Dec 24, 2022.

  1. Dec 24, 2022 at 3:26 PM
    #1
    Connor MacLeod

    Connor MacLeod [OP] New Member

    Joined:
    Nov 27, 2022
    Member:
    #29802
    Messages:
    93
    Gender:
    Male
    First Name:
    Connor
    Vehicle:
    2023 TRD Off Road
    So while installing my TRD Pro roof rack today, I over torqued a bolt and cracked the plastic mounting bracket as shown here.

    1) how big of a problem is this?

    2) does anybody know if I can buy a replacement for this?

    [​IMG]
     
  2. Dec 24, 2022 at 4:23 PM
    #2
    irfan0922

    irfan0922 New Member

    Joined:
    Sep 28, 2020
    Member:
    #17018
    Messages:
    65
  3. Dec 24, 2022 at 4:57 PM
    #3
    2ndGen22re

    2ndGen22re Goldie, my 1st love & my new kid…

    Joined:
    Mar 10, 2022
    Member:
    #26045
    Messages:
    730
    Gender:
    Male
    First Name:
    CR
    Carson Valley, NV
    Vehicle:
    1990 22RE & 22 AG ORP KDSS
    One-at-this-price stripper. Bought new 34 yrs ago, a $13K leftover. Added Detroit TruTrac, 1”rear spring spacer and “pinstripes”… Factory AC kit and roof rack bought at dealer cost at time of purchase, still blows ice cold 32yrs later. 2022 AG ORP all stock.
    JB weld…
     
  4. Dec 24, 2022 at 5:04 PM
    #4
    TN_FunRunner

    TN_FunRunner New Member

    Joined:
    Feb 17, 2018
    Member:
    #5502
    Messages:
    444
    Gender:
    Male
    First Name:
    Jay
    W. TN
    Vehicle:
    2018 TRD ORP, 2007 SR5 4WD
    JB Weld it and forget about it
     
  5. Dec 24, 2022 at 5:40 PM
    #5
    Connor MacLeod

    Connor MacLeod [OP] New Member

    Joined:
    Nov 27, 2022
    Member:
    #29802
    Messages:
    93
    Gender:
    Male
    First Name:
    Connor
    Vehicle:
    2023 TRD Off Road
    Thanks, does it need to be that specific plastic bonder body product, or would regular JB weld be okay?
     
  6. Dec 24, 2022 at 6:59 PM
    #6
    TN_FunRunner

    TN_FunRunner New Member

    Joined:
    Feb 17, 2018
    Member:
    #5502
    Messages:
    444
    Gender:
    Male
    First Name:
    Jay
    W. TN
    Vehicle:
    2018 TRD ORP, 2007 SR5 4WD
    You’ll need the plastic type
     
    Connor MacLeod[OP] and ValK83 like this.
  7. Dec 25, 2022 at 11:34 AM
    #7
    2ndGen22re

    2ndGen22re Goldie, my 1st love & my new kid…

    Joined:
    Mar 10, 2022
    Member:
    #26045
    Messages:
    730
    Gender:
    Male
    First Name:
    CR
    Carson Valley, NV
    Vehicle:
    1990 22RE & 22 AG ORP KDSS
    One-at-this-price stripper. Bought new 34 yrs ago, a $13K leftover. Added Detroit TruTrac, 1”rear spring spacer and “pinstripes”… Factory AC kit and roof rack bought at dealer cost at time of purchase, still blows ice cold 32yrs later. 2022 AG ORP all stock.
    The regular JB works just fine on plastics. My advise is to remove the bracket, use a sharp point knife or scribe and scratch up the inside where the JB is to be applied, apply a pool of JB and let it cure overnight. It will be much stronger than the stock ones.
    https://m.youtube.com/watch?v=XObmZIbHOzY
     
  8. Dec 26, 2022 at 6:45 PM
    #8
    Connor MacLeod

    Connor MacLeod [OP] New Member

    Joined:
    Nov 27, 2022
    Member:
    #29802
    Messages:
    93
    Gender:
    Male
    First Name:
    Connor
    Vehicle:
    2023 TRD Off Road
    Good call - I'll try it. Thanks!
     
  9. Dec 27, 2022 at 12:31 PM
    #9
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    5,536
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    What I've done on cracked automotive plastics before (interior door panel on a Jeep Wrangler) is add either some fiberglass fabric, or even a piece of sheet metal on the glued side. If you're planning on the JB Weld on the underside of the bracket, and there's room for a small piece of sheet metal, I'd add that or the fiberglass mesh to strengthen the repair.

    Or not.

    :)
     
    Saker likes this.
  10. Dec 27, 2022 at 12:53 PM
    #10
    hossler1788

    hossler1788 Turtle

    Joined:
    Dec 17, 2020
    Member:
    #18578
    Messages:
    1,830
    Gender:
    Male
    First Name:
    Joshua
    Central Pa
    Vehicle:
    2020 4runner
    Gorilla glue or jb weld, and call it a day.

    Do you plan on using the rack? I'd love to find a trd rack cheap
     
  11. Dec 28, 2022 at 6:30 PM
    #11
    Connor MacLeod

    Connor MacLeod [OP] New Member

    Joined:
    Nov 27, 2022
    Member:
    #29802
    Messages:
    93
    Gender:
    Male
    First Name:
    Connor
    Vehicle:
    2023 TRD Off Road
    Thanks - I will be keeping the rack however. I had actually listed the rack for sale on that other 4Runner forum before I installed it, but then I ended up installing it and really liked the look, so will be keeping it.
     
  12. Jan 1, 2023 at 1:22 PM
    #12
    Connor MacLeod

    Connor MacLeod [OP] New Member

    Joined:
    Nov 27, 2022
    Member:
    #29802
    Messages:
    93
    Gender:
    Male
    First Name:
    Connor
    Vehicle:
    2023 TRD Off Road
    Thanks to all for the advice on the repair. I used a whole bunch of regular JB Weld on the back side of the piece where it was cracked, with surface prep including sanding, scratching up with a chisel, cleaning, and alcohol wipe. I also incorporated a couple of pieces of perforated metal sheet into the JB Weld for extra strength. It reinstalled with no issues and looks just fine to me!

    [​IMG]
     
    2ndGen22re and Captain Spalding like this.
  13. Jan 1, 2023 at 3:30 PM
    #13
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    5,536
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    :cheers:
     
  14. Jan 2, 2023 at 1:24 PM
    #14
    2ndGen22re

    2ndGen22re Goldie, my 1st love & my new kid…

    Joined:
    Mar 10, 2022
    Member:
    #26045
    Messages:
    730
    Gender:
    Male
    First Name:
    CR
    Carson Valley, NV
    Vehicle:
    1990 22RE & 22 AG ORP KDSS
    One-at-this-price stripper. Bought new 34 yrs ago, a $13K leftover. Added Detroit TruTrac, 1”rear spring spacer and “pinstripes”… Factory AC kit and roof rack bought at dealer cost at time of purchase, still blows ice cold 32yrs later. 2022 AG ORP all stock.
    Good deal, looks great.
    I absolutely love JB.
     

Products Discussed in

To Top