1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Suspension question with bonus ARB diff breather install

Discussion in '5th Gen 4Runners (2010-2024)' started by Buggs, Feb 27, 2017.

  1. Feb 27, 2017 at 1:30 PM
    #1
    Buggs

    Buggs [OP] New Member

    Joined:
    Feb 27, 2017
    Member:
    #3617
    Messages:
    31
    Gender:
    Male
    Vehicle:
    2015 Limited
    Hello everyone,

    Long time lurker, first time poster. Purchased a 2015 used limited from the Toyota dealer less than a year ago (Toyota was the previous owner). Was installing the ARB diff breather on my rear axel and while i was under the car I took a look at the suspension. Noticed that it appeared to have a remote reservoir. Followed the line and came to what appears to be the reservoir (pictured) attached to the side of the frame. It is connected to both the front and rear suspension. What I thought was odd was that I didn't think any models except the TRD Pro came with remote reservoir suspension. In addition the suspension appears to be made by Yamaha. Still drives amazing and have no complaints about it. Just curious if anyone had any information about it and whether it is standard on my particular model or if Toyota gave me a little present. Also, would these particular shocks be compatible with a 3" spring lift? (i.e. switch out the coils) Or would I need to replace the shocks as well? Plan on adding some weight to the vehicle and running 285s to make this a camping rig.

    20170227_121144.jpg
    20170227_121220.jpg

    As promised, here are some pictures of my diff breather install.

    20170227_114802.jpg
    20170227_123045.jpg
    20170227_114823.jpg

    Left some extra hosing near the axle (out of the picture) to account for additional wheel travel and 3" lift down the road.
     
  2. Feb 27, 2017 at 2:08 PM
    #2
    Toyojay

    Toyojay New Member

    Joined:
    Feb 22, 2017
    Member:
    #3583
    Messages:
    46
    Gender:
    Male
    First Name:
    Jay
    ATX
    Vehicle:
    2009 SE 4WD
    285/70/17 KO2 - Dobinsons 3/2" UCA - 5100s @ 0
    From some quick research I can see that it is a factory option and not aftermarket but I'm not sure with what other options this came with. I haven't ever seen one of those. Subbed for more information
     
    Last edited: Feb 27, 2017
  3. Feb 27, 2017 at 2:23 PM
    #3
    Dark Knight

    Dark Knight Get off my lawn

    Joined:
    Sep 18, 2016
    Member:
    #2681
    Messages:
    1,096
    Gender:
    Male
    First Name:
    Jeff
    It's called xreas
     
  4. Feb 27, 2017 at 2:33 PM
    #4
    Toyojay

    Toyojay New Member

    Joined:
    Feb 22, 2017
    Member:
    #3583
    Messages:
    46
    Gender:
    Male
    First Name:
    Jay
    ATX
    Vehicle:
    2009 SE 4WD
    285/70/17 KO2 - Dobinsons 3/2" UCA - 5100s @ 0
    Didn't know they put that system on 5th gens. Also didn't see the hard line to the other shocks in the photos.
     
  5. Feb 27, 2017 at 2:43 PM
    #5
    Buggs

    Buggs [OP] New Member

    Joined:
    Feb 27, 2017
    Member:
    #3617
    Messages:
    31
    Gender:
    Male
    Vehicle:
    2015 Limited
    Thank you. That article helped a lot.
     

Products Discussed in

To Top