1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Looking for simple solutions for sleeping in the back of my 4Runner

Discussion in '5th Gen 4Runners (2010-2024)' started by Fishbum, Apr 18, 2022.

  1. Apr 18, 2022 at 5:49 AM
    #1
    Fishbum

    Fishbum [OP] New Member

    Joined:
    Jun 13, 2021
    Member:
    #21933
    Messages:
    318
    Gender:
    Male
    Looking to do a little car camping this year. Trying to keep it simple it's just kind of going to be on the fly but need some solutions as far as leveling the back out and being able to stuff my 6-ft frame in there.


    Anybody got good ideas
     
  2. Apr 18, 2022 at 6:01 AM
    #2
    MeefZah

    MeefZah ---

    Joined:
    Nov 1, 2015
    Member:
    #1122
    Messages:
    2,544
    Gender:
    Male
    Lexington, Ohio
    Many threads. Summary of the cheapest way:

    Build 2.5" tall "pallet'"

    Procure air mattress

    Remove slanted hatch / seat fascia cover, remove 2nd row seat bottoms, fold seat backs forward

    Move 1st row seats fully forward, use boxes or gear in footwells to fill in gap

    [​IMG]

    [​IMG]

    [​IMG]
     
    Kfish, Ricphoto, Steve40th and 10 others like this.
  3. Apr 18, 2022 at 6:08 AM
    #3
    BionicRandy

    BionicRandy New Member

    Joined:
    Dec 4, 2021
    Member:
    #24510
    Messages:
    831
    Gender:
    Male
    First Name:
    Randy
    TX Hill Country
    Vehicle:
    2012 Black SR5 aka the Batmobile
    Lots of goodies
    There are several ways! I tried a small rear deck level with the folded down seats at first but had too much stuff crowded in there so I took out the back seats and built a slightly taller deck (4”). It was not as efficient with space usage with the small (useless) drawers and limited room where the seats used to be. I ended up with this. Removing back seats isn’t for everyone, but I wish I had done this first. I got my toolbox and kitchen off the roof and put a 34 liter water tank where the seats were. Lots of headroom and storage both, with a padded flat stable sleeping surface.

    960F79BD-1F0C-40FE-BDB4-5F666C56C9AC.jpg
     
    Toy4X4 likes this.
  4. Apr 18, 2022 at 6:09 AM
    #4
    Fishbum

    Fishbum [OP] New Member

    Joined:
    Jun 13, 2021
    Member:
    #21933
    Messages:
    318
    Gender:
    Male
    That's solid trying to do it without removing the rear seats may have to sleep on an angle. Wonder if I could come up with some heavy foam or something so I didn't have to put the pallet in there
     
    Surly Shawn likes this.
  5. Apr 18, 2022 at 10:11 AM
    #5
    MeefZah

    MeefZah ---

    Joined:
    Nov 1, 2015
    Member:
    #1122
    Messages:
    2,544
    Gender:
    Male
    Lexington, Ohio
    Trust me and everyone who has tried to sleep in the back without a spacer for the floor of the cargo area: you feel that hump in the middle and you will slide down it and puddle at the base of the hatch whereupon you will require an entire bottle of ibuprofen the next morning. You don't have to build a pallet but you need something with some substance to support you in the hatch.

    I'm a proponent of the pallet (AFAIK I was the first, this one dates to 2015), and it really is cheap and doesn't take up storage space. I leave it in there all the time. It kind of doubles as a cheap sliding tray provided you don't slide it out more than halfway! You can also add D rings and a rubber mat on top which are super useful in keeping daily gear in place.

    I get that opinions vary though.
     
    Ironguy, True North, K-Paul and 6 others like this.
  6. Apr 18, 2022 at 10:16 AM
    #6
    Fishbum

    Fishbum [OP] New Member

    Joined:
    Jun 13, 2021
    Member:
    #21933
    Messages:
    318
    Gender:
    Male
    Agreed
     
  7. Apr 18, 2022 at 10:35 AM
    #7
    YetiMtnBkr

    YetiMtnBkr New Member

    Joined:
    Jan 3, 2021
    Member:
    #18893
    Messages:
    940
    Gender:
    Male
    First Name:
    Jim
    Frederick, MD
    Vehicle:
    2021 LR Pro
    None
    I will definitely replicate your pallet approach for 60% of the rear. I want to secure my mountain bike in the back in the upright position behind the driver's seat. I will remove both lower seats and might remove the entire 40% seat for my road / bike trip. For one person, plenty of room in the rear to sleep and still stow the necessities. I'm not overlanding! Bike, Bunk, Burgers & Beer!
     
    DallasTRDPro likes this.
  8. Apr 18, 2022 at 10:45 AM
    #8
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    12,412
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Being 6' tall, you'll be much happier with the rear seat bottoms removed. Otherwise, it's about 68" from the hatch to the folded seat bottoms. The good thing is that the seat bottoms can be removed in just a few minutes.

    I think a simple platform to level the cargo area to the folded seat backs will be the easiest solution. You might also need something to fill in the rear footwell area to be level with the seat backs.
     
    Last edited: Apr 18, 2022
    Toy4X4, MeefZah and Singleminded like this.
  9. Apr 18, 2022 at 11:00 AM
    #9
    Pavo

    Pavo New Member

    Joined:
    Sep 21, 2020
    Member:
    #16867
    Messages:
    577
    Gender:
    Male
    I used a Walmart lifetime table which folds in half to level the hump pretty well. I throw on a memory foam mattress from Amazon and always sleep good
     
  10. Apr 18, 2022 at 11:05 AM
    #10
    Fishbum

    Fishbum [OP] New Member

    Joined:
    Jun 13, 2021
    Member:
    #21933
    Messages:
    318
    Gender:
    Male
    Seriously???
    Pic's?
     
    Ironguy and Thatbassguy like this.
  11. Apr 18, 2022 at 11:11 AM
    #11
    YetiMtnBkr

    YetiMtnBkr New Member

    Joined:
    Jan 3, 2021
    Member:
    #18893
    Messages:
    940
    Gender:
    Male
    First Name:
    Jim
    Frederick, MD
    Vehicle:
    2021 LR Pro
    None
    That sounds too easy! Pictures please!

    I just checked out the table - $46. This would be a great, cheap dual purpose solution!
     
    Last edited: Apr 18, 2022
    BionicRandy and Thatbassguy like this.
  12. Apr 18, 2022 at 11:23 AM
    #12
    Fishbum

    Fishbum [OP] New Member

    Joined:
    Jun 13, 2021
    Member:
    #21933
    Messages:
    318
    Gender:
    Male
    Is it the 4ft or 6 ft folding table

    I think it's going to be close to 3/4 of an inch or more too high in the other direction.

    And where did you see it that cheap
     
    Last edited: Apr 18, 2022
    Thatbassguy likes this.
  13. Apr 18, 2022 at 11:31 AM
    #13
    MeefZah

    MeefZah ---

    Joined:
    Nov 1, 2015
    Member:
    #1122
    Messages:
    2,544
    Gender:
    Male
    Lexington, Ohio
    The only downside I see to a table is you can't really set up camp cooking and sleeping arrangements at the same time. Generally I leave our table up overnight because we use it for dinner prep and washing dishes at night, and breakfast prep and washing dishes in the AM. Might be a little inconvenient to use as a table at night, then put everything away to use it as a spacer, then back out again in the morning to use as a table, then back in again before you load everything up on top of it...
     
  14. Apr 18, 2022 at 11:31 AM
    #14
    YetiMtnBkr

    YetiMtnBkr New Member

    Joined:
    Jan 3, 2021
    Member:
    #18893
    Messages:
    940
    Gender:
    Male
    First Name:
    Jim
    Frederick, MD
    Vehicle:
    2021 LR Pro
    None
    Online Walmart 48". I am assuming the 48". We need to confirm with Pavo! If this actually works, one would have a functional table if need be and the vinyl table top would be softer than a sheet of plywood. Or most importantly keep me from cutting my fingers off crafting a simple platform. I am very intrigued with this option!
     
  15. Apr 18, 2022 at 11:35 AM
    #15
    YetiMtnBkr

    YetiMtnBkr New Member

    Joined:
    Jan 3, 2021
    Member:
    #18893
    Messages:
    940
    Gender:
    Male
    First Name:
    Jim
    Frederick, MD
    Vehicle:
    2021 LR Pro
    None
    Ha! I don't even like to cook at home let alone in the field. The possible table solution will be more of a platform than a table for me.
     
  16. Apr 18, 2022 at 11:38 AM
    #16
    BlueberryTRD

    BlueberryTRD New Member

    Joined:
    Sep 10, 2021
    Member:
    #23282
    Messages:
    16
    Gender:
    Male
    I threw in a sleeping bag and slept on an angle. That's all.
     
    djb1, Surfinjoe and Thatbassguy like this.
  17. Apr 18, 2022 at 12:11 PM
    #17
    MattO2786

    MattO2786 New Member

    Joined:
    Aug 20, 2018
    Member:
    #6824
    Messages:
    119
    Gender:
    Male
    Cleveland, OH
    Vehicle:
    2018 Blizzard Pearl 4Runner Limited
    Where are you located? I already have a leveling platform thag I upholstered two years ago. I since swapped my TRD OR for a Limited with third row, so I can’t use it. If you’re close, I’ll part with it for a 6 pack.
     
  18. Apr 18, 2022 at 12:14 PM
    #18
    Fishbum

    Fishbum [OP] New Member

    Joined:
    Jun 13, 2021
    Member:
    #21933
    Messages:
    318
    Gender:
    Male
    Unfortunately central Pennsylvania
     
    Thatbassguy likes this.
  19. Apr 18, 2022 at 12:14 PM
    #19
    Fishbum

    Fishbum [OP] New Member

    Joined:
    Jun 13, 2021
    Member:
    #21933
    Messages:
    318
    Gender:
    Male
    Otherwise that would have been perfect..
     
    Thatbassguy likes this.
  20. Apr 18, 2022 at 1:56 PM
    #20
    Marcor

    Marcor Someday

    Joined:
    Jan 15, 2021
    Member:
    #19132
    Messages:
    92
    Gender:
    Male
    SE PA/SE FL
    Vehicle:
    2021 ORP
    I use a piece of Dow 2” blue foam insulation. Rigid like a homemade pallet but only weighs a few ounces.
    Super durable,won’t crumble crack or chip off like regular styrofoam.
    Found a broken 4x8 sheet(only need a lil more than half) at our supply yard from work that they couldn’t sell,freebie.
    Make a paper template for the entire cargo area, then cut with a jigsaw or even a hacksaw blade.
    Good luck
    https://www.lowes.com/pd/Dow-Common...ced-Polystyrene-Foam-Board-Insulation/3365272
     
    LeeTN and Thatbassguy like this.
  21. Apr 18, 2022 at 2:01 PM
    #21
    Hallzilla

    Hallzilla New Member

    Joined:
    Nov 9, 2021
    Member:
    #24172
    Messages:
    73
    Gender:
    Male
    Hopetown
    Vehicle:
    2021 TRD ORP & 2010 Tacoma TRD
    Fox 2.5, Icon UCA, Ellis Precision AJT
  22. Apr 18, 2022 at 2:26 PM
    #22
    Surly Shawn

    Surly Shawn New Member

    Joined:
    Feb 23, 2022
    Member:
    #25803
    Messages:
    58
    Gender:
    Male
    Illinois
    Vehicle:
    2021 Silver TRD Off Road
    Gobi Ranger Rack, Victory 4x4 Molle Panels, Strawfoot Window Covers, R4T Blackout Emblems, USR LED Interior Lights, TRD Cold Air Intake...
    I bought some home gym floor mats at work one day (https://www.dickssportinggoods.com/...ick-16fgeufg24sqftflreac/16fgeufg24sqftflreac), it's more than enough to cover half of the back since it is only me so far. I stacked them three high by the hatch, two high in the middle, and then one layer over the folded down seats. Easy peasy. Feels like sleeping on the ground with a decent pad. I am planning on something more permanent though.

    If I have a picture of it set up, I'll upload it for you.
     
    YetiMtnBkr and Thatbassguy like this.
  23. Apr 18, 2022 at 10:17 PM
    #23
    Helly

    Helly New Member

    Joined:
    Apr 18, 2022
    Member:
    #26715
    Messages:
    18
    I think that mats is the best way to sleep in the car. You may use a sleeping bag to feel more comfortable. And don't forget to turn off the engine! Do you want to take a cooler with you (as I understand, you are going to camping)? It's important to think about it where are you going to put it
     
    Thatbassguy likes this.
  24. Apr 19, 2022 at 5:49 AM
    #24
    Antmart26

    Antmart26 New Member

    Joined:
    Jan 15, 2021
    Member:
    #19140
    Messages:
    50
    Gender:
    Male
    First Name:
    Anthony
    Vehicle:
    2021 venture
  25. Apr 19, 2022 at 10:40 AM
    #25
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    The pallet theme is really the way to go if you want simple. I made mine two sided, so I can used the spaces between the studs for storage of thin items (machetes, axes, tommy guns).

    During summer, I remove the seat bottom on the passenger side for extra head room and storage in the footwell.
     
  26. Apr 19, 2022 at 1:52 PM
    #26
    Pavo

    Pavo New Member

    Joined:
    Sep 21, 2020
    Member:
    #16867
    Messages:
    577
    Gender:
    Male
    Ya I figured out the trick because normally I dispersed camp in the middle of nowhere where I use my table but one time I didn't need it. I figured then to buy an extra table that way I have a back up table in case I need it, the table is definitely one of my most useful camping tools so you can't have too many
     
  27. Apr 19, 2022 at 1:53 PM
    #27
    Pavo

    Pavo New Member

    Joined:
    Sep 21, 2020
    Member:
    #16867
    Messages:
    577
    Gender:
    Male
    I'll check my table size when I get home but basically the folding table I bought at the camping section of walmart
     
    YetiMtnBkr[QUOTED] likes this.
  28. Apr 19, 2022 at 8:01 PM
    #28
    Hallzilla

    Hallzilla New Member

    Joined:
    Nov 9, 2021
    Member:
    #24172
    Messages:
    73
    Gender:
    Male
    Hopetown
    Vehicle:
    2021 TRD ORP & 2010 Tacoma TRD
    Fox 2.5, Icon UCA, Ellis Precision AJT
    Thatbassguy likes this.
  29. Apr 19, 2022 at 9:06 PM
    #29
    kaizen

    kaizen New Member

    Joined:
    Sep 11, 2021
    Member:
    #23313
    Messages:
    128
    Gender:
    Male
    Rocky Mountain High
    Vehicle:
    2021 Silver Limited
    At 5’6” this was the cheapest and most effective solution for me to have a sleeping platform plus have room to store the mtb inside. I just throw a 3” memory foam pad on top and it’s money 0038AEA8-6B08-412F-914B-57B17D422112.jpg

    edit: sorry OP just realized it wasn’t you who mentioned wanting to also store the bike inside
     
  30. Apr 20, 2022 at 4:16 AM
    #30
    K-Paul

    K-Paul Looking for a water crossing

    Joined:
    Sep 7, 2021
    Member:
    #23237
    Messages:
    1,062
    Gender:
    Male
    First Name:
    Corbin Dallas
    Vehicle:
    SR5 4WD
    Why did I think I would be a smartass and invert my body so my legs could go upward would be good? Two Advil just for trying the stupid stunt.......

    66A9B3C0-0F0B-4A36-869E-27FBD3465399.jpg
    AD79D654-AD9A-4915-9538-B037A7C43661.jpg

    Anyway, legnth-wise I am good to leave the seats in, just need to find a platform solution that can stay inside as I also leave my tables setup under the awning overnight.
     
    Surly Shawn and MeefZah[QUOTED] like this.

Products Discussed in

To Top