1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Help with bumper

Discussion in '3rd Gen 4Runners (1996-2002)' started by itschuck727, Sep 20, 2016.

  1. Sep 20, 2016 at 2:41 AM
    #1
    itschuck727

    itschuck727 [OP] New Member

    Joined:
    Aug 10, 2016
    Member:
    #2441
    Messages:
    6
    Gender:
    Male
    Vehicle:
    2002 4runner
    stock
    Isn't my bumper.supposed to.sit pretty much snug under the fender? 20160916_154059.jpg
     
  2. Sep 20, 2016 at 6:49 AM
    #2
    Relentless

    Relentless Offroad armor Fabricating beast! Vendor

    Joined:
    Apr 18, 2014
    Member:
    #74
    Messages:
    221
    Gender:
    Male
    First Name:
    Eric
    Sparks NV
    Vehicle:
    05 Limited 4.7 V8, long travel, dual locked
    Lifted on 35s and Relentless Armored, too much to list!
    It should be sitting higher.Crawl under and see if all the brackets are there and secure. There is one right off the side of the frame at the front body mount, and also a support out near the tip of the bumper by the fender opening. If either of those are missing or the hardware came loose it would do that.
     
  3. Sep 20, 2016 at 10:29 AM
    #3
    itschuck727

    itschuck727 [OP] New Member

    Joined:
    Aug 10, 2016
    Member:
    #2441
    Messages:
    6
    Gender:
    Male
    Vehicle:
    2002 4runner
    stock

    Yeah all brackets are there. I put the is bumper on because the stoak one had some dents in it. And every hole lined up.... idk what's wrong, but I also have not climbed back under since I put it on.
     

Products Discussed in

To Top