1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2021 TRD Pro Fox suspension

Discussion in '5th Gen 4Runners (2010-2024)' started by Gstick, Oct 10, 2021.

  1. Oct 10, 2021 at 6:03 AM
    #1
    Gstick

    Gstick [OP] New Member

    Joined:
    Jul 17, 2021
    Member:
    #22392
    Messages:
    154
    Gender:
    Male
    Vehicle:
    19' TRD OFF ROAD
  2. Oct 10, 2021 at 7:46 AM
    #2
    kmeeg

    kmeeg LionRunner

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    4,622
    Gender:
    Male
    From what I see on mine that is all you need. Re-use the stock UCA and Rear spring. On a side note I will say TRD Fox shocks are not worth. I have posted one suggestion instead. My reason is TRD Pro fox are not intended to provide lift (IMO). As members here will suggest there are many other good suspension kits out there..
    upload_2021-10-10_8-33-31.jpg


    one suggestion -
    upload_2021-10-10_8-40-22.jpg
     
    travelinscout and Mtbpsych like this.
  3. Oct 10, 2021 at 9:14 AM
    #3
    Moon Landing

    Moon Landing AFFTC 1967/68 Eddies Air Patch

    Joined:
    Feb 4, 2021
    Member:
    #19563
    Messages:
    2,171
    Gender:
    Male
    First Name:
    Jer
    La Quinta, Ca. AKA "The Skillet"
    Vehicle:
    Moon Rock 4Runner
    Nam 68/69
    How is it they manage to lift the 4R 1".........did Toyota and Fox engineers miss something? Asking for the OP.
     
    Rocksurfer and suaveflooder like this.
  4. Oct 10, 2021 at 9:35 AM
    #4
    kmeeg

    kmeeg LionRunner

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    4,622
    Gender:
    Male
    I should have corrected as "a proper lift". You can even get 2-3 in lift with stock SR5/ TRD ORP shocks by just changing the springs. (Yes I have first hand experience doing that) No need of complicated engineering sir.

    All I was saying was, OP can spend the money for better suspension setup than TRD Fox where you get 2.5-3in lift with better wheel articulation. I think it was 0.7in lift when I measured TRD Fox vs stock. Now I don't have a stock one near by to compare. All my buddies have lifted. Only 1 TRD ORP with KDSS who is about 1 hour away from me..

    Again please don't get me wrong, it's just my opinion where I prefer longer shocks with lift.
    :cheers:
     
  5. Oct 10, 2021 at 3:20 PM
    #5
    Gstick

    Gstick [OP] New Member

    Joined:
    Jul 17, 2021
    Member:
    #22392
    Messages:
    154
    Gender:
    Male
    Vehicle:
    19' TRD OFF ROAD
    Well first of all, I don't want a 2-3" lift.
    Secondly, if I can get the 2021 TRD Pro Fox suspension parts for $1500 NIB, I think that would be a bargain.
    And lastly, I prefer OEM parts over aftermarket for fit, finish, & the R&D that was involved.
     
    Last edited: Oct 10, 2021
    Spydr5, Dabigono, YetiMtnBkr and 2 others like this.
  6. Oct 10, 2021 at 3:42 PM
    #6
    Slopemaster

    Slopemaster Slope Survivalist

    Joined:
    Mar 20, 2021
    Member:
    #20442
    Messages:
    2,838
    Gender:
    Male
    Idaho
    Vehicle:
    2018 SR5
    265-70-17 Ridge Grapplers, TRD Pro rims, 3M precut bra, N-Fab nerf/steps
    That's a good point.

    I have noticed reading the lift/suspension threads, that those who are experiencing squeaks, rattles and premature wear (ball joints, bushing, shocks, etc) are running aftermarket suspension components.

    Very few posts with stock suspension issues.
     
    MiamiMark likes this.
  7. Oct 11, 2021 at 6:47 AM
    #7
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    2,041
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    I'd definitely spend the money on something better than the pro bro stuff. Plenty of pro bro owners have experienced noise or other issues. Technically the Pro Bro shocks are aftermarket. Fox makes them.
     
    Last edited: Oct 11, 2021
    suaveflooder, nimby and Mtbpsych like this.
  8. Oct 11, 2021 at 4:12 PM
    #8
    Gstick

    Gstick [OP] New Member

    Joined:
    Jul 17, 2021
    Member:
    #22392
    Messages:
    154
    Gender:
    Male
    Vehicle:
    19' TRD OFF ROAD
    Yes I know that that Fox makes them, but I would bet that the Toyota engineers required Fox to certain specs on the TRD Pro coilover.
     
    icyhotahs likes this.
  9. Oct 11, 2021 at 4:28 PM
    #9
    nimby

    nimby in the drink

    Joined:
    Mar 27, 2017
    Member:
    #3777
    Messages:
    4,451
    First Name:
    Jake
    California
    Vehicle:
    2018 SR5P
    Bilstein 8112/8100 are better shocks for a similar price.

    OEM "fit, finish and R&D" doesn't mean shit when they've been recalled.
     
    DrewMan, Jcaplinger199 and kmeeg like this.
  10. Oct 11, 2021 at 4:31 PM
    #10
    kmeeg

    kmeeg LionRunner

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    4,622
    Gender:
    Male
    Wow, slow down. Some religiously respect TRD PRO. You don't want to get them angry..
     
  11. Oct 11, 2021 at 4:39 PM
    #11
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    2,041
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    Toyota made a call to Fox and had them make a "performance" shock on a budget. That's the specs they negotiated.
     
  12. Oct 11, 2021 at 4:39 PM
    #12
    Moon Landing

    Moon Landing AFFTC 1967/68 Eddies Air Patch

    Joined:
    Feb 4, 2021
    Member:
    #19563
    Messages:
    2,171
    Gender:
    Male
    First Name:
    Jer
    La Quinta, Ca. AKA "The Skillet"
    Vehicle:
    Moon Rock 4Runner
    Nam 68/69
    Some peoples kids :rofl:
     
  13. Oct 11, 2021 at 5:51 PM
    #13
    Gstick

    Gstick [OP] New Member

    Joined:
    Jul 17, 2021
    Member:
    #22392
    Messages:
    154
    Gender:
    Male
    Vehicle:
    19' TRD OFF ROAD
    Yes I know they have been recalled & they changed the spring perch on the updated model which many believe was making the "clunk". I had Bilstein 5100's on my '10 4R & I did like them. I don't want any more than 1" lift in the front & was considering the updated TRD Pro Fox if I got them for $1500 NIB. I am just researching as much as I can right now.
     
  14. Oct 12, 2021 at 9:20 AM
    #14
    AgentKooper

    AgentKooper New Member

    Joined:
    Nov 25, 2020
    Member:
    #18097
    Messages:
    112
    Gender:
    Male
    Vehicle:
    2021 4Runner TRD Pro
    I’ve got the updated Fox TRD shocks in my 2021. They ride great, and the small lift looks good. No clunking whatsoever. If you can get a good price, go for it.
     
    Jrunr likes this.
  15. Oct 12, 2021 at 12:13 PM
    #15
    Jrunr

    Jrunr 2021 TRD Pro

    Joined:
    Sep 7, 2021
    Member:
    #23243
    Messages:
    667
    Gender:
    Male
    First Name:
    Jason
    Vehicle:
    2021 Magnetic Grey Metallic TRD Pro
    what exactly is the lift amount with these?
     
  16. Oct 12, 2021 at 12:19 PM
    #16
    Zal4R

    Zal4R New Member

    Joined:
    Jun 22, 2021
    Member:
    #22043
    Messages:
    116
    Vehicle:
    ‘21 LR TRD Pro
    Eibach TRD Pro Springs RCI Skids
    1 inch up front. Back is stock height. Granted, pretty sure that is pre settling in and sliders, etc.

    whoops fixed.
     
    Last edited: Oct 12, 2021
  17. Oct 12, 2021 at 12:33 PM
    #17
    Moon Landing

    Moon Landing AFFTC 1967/68 Eddies Air Patch

    Joined:
    Feb 4, 2021
    Member:
    #19563
    Messages:
    2,171
    Gender:
    Male
    First Name:
    Jer
    La Quinta, Ca. AKA "The Skillet"
    Vehicle:
    Moon Rock 4Runner
    Nam 68/69
    Think that's a half inch too high. Not that it's a big deal ;)
     
  18. Oct 12, 2021 at 10:01 PM
    #18
    AgentKooper

    AgentKooper New Member

    Joined:
    Nov 25, 2020
    Member:
    #18097
    Messages:
    112
    Gender:
    Male
    Vehicle:
    2021 4Runner TRD Pro
    As said above, about an inch. Nothing extreme, obviously. But I think it's enough to improve the stance.
     
    Moon Landing likes this.
  19. Oct 12, 2021 at 11:58 PM
    #19
    Jrunr

    Jrunr 2021 TRD Pro

    Joined:
    Sep 7, 2021
    Member:
    #23243
    Messages:
    667
    Gender:
    Male
    First Name:
    Jason
    Vehicle:
    2021 Magnetic Grey Metallic TRD Pro
    Ok. I am wondering if I do the eibach springs (when they come available) if it will provide enough lift to run 285/70/17 tires... (Either Nitto RG or Toyo AT3).
     
  20. Oct 13, 2021 at 3:21 PM
    #20
    Mr.Franko

    Mr.Franko New Member

    Joined:
    Jul 19, 2021
    Member:
    #22430
    Messages:
    26
    Gender:
    Male
    Dallas/Ft.Worth
    Vehicle:
    2017 TRD PRO
    Wait for the Eibachs and go with 255/80/17 RGs or Falken Wildpeaks.
     
    DrewMan and YetiMtnBkr like this.
  21. Oct 13, 2021 at 9:25 PM
    #21
    Jrunr

    Jrunr 2021 TRD Pro

    Joined:
    Sep 7, 2021
    Member:
    #23243
    Messages:
    667
    Gender:
    Male
    First Name:
    Jason
    Vehicle:
    2021 Magnetic Grey Metallic TRD Pro
    I did not ask about this size. I asked about 285/70/17…
     
  22. Oct 14, 2021 at 8:58 AM
    #22
    edgesalon

    edgesalon New Member

    Joined:
    Sep 16, 2018
    Member:
    #7148
    Messages:
    614
    Gender:
    Male
    First Name:
    Te
    Vehicle:
    18 FunRunner :-)
    yes there is Eibach thread look it up and some one on this site got their 21 pro LR fitted with the new springs i think he is running 285s
     
    Jrunr[QUOTED] likes this.
  23. Dec 6, 2021 at 7:28 PM
    #23
    Jcaplinger199

    Jcaplinger199 New Member

    Joined:
    Dec 6, 2021
    Member:
    #24543
    Messages:
    1
    Gender:
    Male
    First Name:
    Justin
    Vehicle:
    2021 4Runner TRDOP
    I’m in the same bout and thinking about going this route. How did to fox TRD pro suspension effect the nose dive on braking
     
  24. Dec 6, 2021 at 7:40 PM
    #24
    Slopemaster

    Slopemaster Slope Survivalist

    Joined:
    Mar 20, 2021
    Member:
    #20442
    Messages:
    2,838
    Gender:
    Male
    Idaho
    Vehicle:
    2018 SR5
    265-70-17 Ridge Grapplers, TRD Pro rims, 3M precut bra, N-Fab nerf/steps
    If I had the opportunity to install a Fox Pro suspension, I’d consider it.

    This question has been asked a thousand times but is the Pro suspension stiffer than the stock OEM suspension. If yes, I might pass, I’m one of the very few people on this forum that likes the soft/squishy ride. ;)
     
  25. Dec 7, 2021 at 8:24 AM
    #25
    DallasTRDPro

    DallasTRDPro New Member

    Joined:
    Feb 7, 2020
    Member:
    #13058
    Messages:
    1,069
    Gender:
    Male
    Dallas
    Vehicle:
    2021 Honda CRV...UGH!
    Why not just add a spacer for 1" lift? $50. Thats what I did. It still rides stock. When I had my Pro I added the Eibach springs and that was perfect amount of lift and leveling. I was able to run 285/70's. Now I'm just running a 1/2" spacer up front on my SR5P and 275's. Yes my Pro sat higher by about 2", but this one looks good enough to me and it was cheap.
     
  26. Dec 7, 2021 at 10:05 AM
    #26
    slixx1320

    slixx1320 New Member

    Joined:
    Nov 29, 2021
    Member:
    #24430
    Messages:
    388
    I've been wanting to do just this to level up the front... but just wondering though, if adding anything aftermarket, even a 1/2" spacer lift to the front, wouldn't that void the manufacturer warranty? I mean, if anything goes wrong, they can always use that as an excuse saying "he mod'd it, so warranty is voided". Been reading about that needle bearing issue some of these 4runners have and some dealers have blamed it on the lift and the tires etc..
     
  27. Dec 7, 2021 at 10:43 AM
    #27
    DallasTRDPro

    DallasTRDPro New Member

    Joined:
    Feb 7, 2020
    Member:
    #13058
    Messages:
    1,069
    Gender:
    Male
    Dallas
    Vehicle:
    2021 Honda CRV...UGH!
    never had a problem with a spacer.
     
  28. Dec 7, 2021 at 7:01 PM
    #28
    OneWhoWonders

    OneWhoWonders New Member

    Joined:
    Nov 17, 2021
    Member:
    #24279
    Messages:
    17
    Gender:
    Male
    Go with the Fox TRD kit. These are designed for long life and can handle just as well as aftermarket. In all my experiences aftermarket parts are designed to see mechanical failure much quicker than OEM.
     
    bigpharma9, MiamiMark and Slopemaster like this.
  29. Dec 30, 2021 at 1:28 PM
    #29
    rrb1981

    rrb1981 New Member

    Joined:
    Nov 21, 2021
    Member:
    #24318
    Messages:
    29
    Gender:
    Male
    Vehicle:
    2021 Silver Metallic Toyota 4Runner ORP
    So...not to beat a dead horse here.....but a neighbor has a TRD Pro which he promptly removed the TRD Fox suspension system within the first 1000 miles. He has offered it to me (I have a '21 ORP) for sale. What is this worth? What do I gain "upgrading" from my stock '21 ORP suspension to the TRD Fox suspension?
     
  30. Dec 30, 2021 at 7:24 PM
    #30
    Moon Landing

    Moon Landing AFFTC 1967/68 Eddies Air Patch

    Joined:
    Feb 4, 2021
    Member:
    #19563
    Messages:
    2,171
    Gender:
    Male
    First Name:
    Jer
    La Quinta, Ca. AKA "The Skillet"
    Vehicle:
    Moon Rock 4Runner
    Nam 68/69
    Worth? Best answer may be found in > 'buy- sell - trade'

    Gain? That really depends on what your intended use would be. If for on road use only....probably, not much. Others may or may not agree with that assessment.
     

Products Discussed in

To Top