What have you done to your 5th Gen 4Runner today?

Thanks for sharing … I own & installed a set of the Rago’s several years ago and they have been great … I’ve been trying to decide on there upper middle shelf to complete the setup … but dang it … I’m really digging that lower mid level shelf you installed … Does it rub up against the back seat at all when driving?

 

These ain't mine man... but they look like Caliraised
I have ragos too and was considering the top shelf but after careful consideration...not for me.
The top space is limited and the window molles do the trick for my lifestyle.
Cali's look way good tho

 

Thanks! All of these upgrades were from Caliraised, the molle tray does not rub against the seat.

 

Rinsed all the salt off from the undercarriage.

 

Took it to get washed but because of all the snow melt it was dirty again when I got home.
Any way I installed raptor lights and TSO grill as well fixed my exhaust noise rattle. I also ordered Dirty Parts AVB for the AGM battery I installed earlier.

 

Cheapo eBay covers but I’ve had good luck with similar chrome pieces before and these seem on par with the rest of the OEM overlays.

 

Picked up my 2021 Off Road Premium today and installed the Start-X remote starter as soon as I got home, went well besides fighting the air bag some, many more parts on order, front leveling kit should be here next.

 

After last weekend desert run, gave my 4R quick shower with Wash&Wax, then Dressed 4 tires...Also clayed to take all contaminates off from hood.

 

Just put on some K02 265/70/17. Rubbing a little. Wondering if I should lift it.

 

Interesting. I’m also running K02’s and am not rubbing. What’s size are your wheels? More aggressive than a +0 offset?

 

Thanks! Both. Scored a color matched TRD OR bumper on Facebook for $75. So we popped out the dented bumper so we can do some trail runs on some high clearance cuts.

Untitled by redrunner87, on Flickr

 

I have a -12 offset

 

That's a big part of your rubbing issue. The more the wheel sticks out, the more rubbing issues you're going to have.

 

Ordered my water Jerry can the pump, and electric nozzle for it. Still trying to track down a pre ban scepter fuel can vs ordering the wavian. Ordered the Jerry can holder from @victoryrunner for the new bumper. Decided to sell the rotopax’s we’ve ran forever and go with Jerry after my wife watched @WanderlostOverland water on tap video.

 

what brand are your rock sliders?

 

what’s your can set up going to be?

 

Final couple of mods to get ready for a 3-week 3100-mile trek from Washington to Mexico border and back. Doing some fairly difficult jeep trails in the desert, so had to get the 2.5" lift, 33s, and new running boards with more clearance. Following someone with a 2008 2dr Wrangler with a 2" lift and 33s, so hopefully can keep up and not break anything.

Today was figuring out how to get a shovel and ax mounted in my roof rack. Decided on using a Kolpin ATV gun rack. Attached it to my GoRhino rack, then installed the ax and shovel, then used a bicycle cable lock to discourage theft attempts. Took it out on the highway and went to 71mph today and no noise and everything secure, so should be good to go. Admittedly redneck engineered, but it will work.

 

You can position the Rago shelf as high or as low as you want. The last pic on their page for it says so. Dang, it doesn't look like they offer it in raw steel anymore. I got raw steel side panels. I wanted to get the raw steel shelf one day and paint it the same way.

 

Cali Raised

 

I wish you well if you went off jerrycan dot com. After 6 units failed right outta the box he stiffed me and it took a few months for the cc company to get my cash back minus my shipping cost to return his junk

 

I went off Amazon never heard of the other company. I’m going to build the unit myself

 

Whatcha mean ? I’m doing dual cans one fuel one water with a 12v water faucet attached to the water can.

 

yeah, what’s the part list for your water,

 

Scepter 05935 Military Water Container - 5 Gallon (20 Litre), AM Sand

$46 Scepter Portable Military Style Water Container for Camping and Outdoors, 5 Gallon, Sand - Heavy-Duty Plastic Beverage and Hydration Dispenser for Outdoor Trip

https://www.amazon.com/dp/B001IV8IYA/ref=cm_sw_r_cp_api_glt_fabc_CK951QKN9K7R7K9FQRJZ

SHURFLO 94-009-10 Electric Faucet - White

$68 Shurflo by Pentair Electric Water Faucet w/Switch - White

https://www.amazon.com/dp/B001CMEQSC/ref=cm_sw_r_cp_api_glt_fabc_Q0HQH5R9TK7S177DBXHQ

12V Portable Submersible Water Pump | Top Quality Small Elegant Pump Made in Germany by Comet |For Campervan, RV, Boat, Outdoor, Travelling, Well, Aquarium, Gardening Use

$55 12V Submersible Water Pump (2GPM / 16ft.) | Works with Microswitch 12V Faucets | 12 Volt Small Water Transfer Pump For RV, Jerry Can, Camping, Pond, Boat | German Made

https://www.amazon.com/dp/B01M3XOXQ0/ref=cm_sw_r_cp_api_glt_fabc_AKSAV8KYHCCJDZNGJW7Y

And then a few grommets, wire loom, silicon, plumbers tape etc.

 

nice! Thanks. Keep us updated.

 

I will. Delivery is expected Saturday. We have a party to go to that night. Depending on the hangover and all 10 digits being intact (axe throwing) I’ll have it done Sunday and will post it up.

 

Just ordered the following a couple days ago and have yet to post...

1. Ironman 12,500lb winch (was going to go 9500 but honestly there are the same size and practically the same weight. I just figured better to have a beefier setup and hope to never have to use it. More than likely it will rarely see anything like that and if so I will have snatch blocks).
   
   
2. Ironman foam cell pro suspension
   
   
3. Ironman recovery snatch rope
   
   
4. Ironman recovery traction boards
   
   
5. lilbscustomfab Hybrid Front Bumper
   
   
6. lilbscustomfab BMC
   
   
7. Sticker made by my wife... see below

I will happily share pictures when I have parts installed.

 

I just made a parts list for my freshwater system too.

 

My ARB snorkel showed up today unexpectedly (never received tracking info and on back order a couple months) which was a nice surprise.

SSO Hybrid finally shipped today also and should have Friday. Been wanting this for a while and have my Warn Evo 10 ready to go. Going to do the high clearance cut as well.

Ordered a 40” BD S8 light bar tonight and will mount once my Gobi arrives. Think I’m at 19 weeks now on my rack and ladder. I’m thinking April is when I expect it.

Also ordered 3 CH4X4 switches one for bumper, roof and rear lights (I have another already for my ditch lights). I like how they have the 5th gen silhouette on the switches and fit the stock switch banks.

My Demello stealth sliders should be shipping soon as well. Supposed to be powder coated this week. I’m at 11 weeks on those.

 

Love that! Where can I get one?