1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Another rattle thread...

Discussion in '5th Gen 4Runners (2010-2024)' started by Code3runr, Feb 12, 2021.

  1. Feb 12, 2021 at 4:51 PM
    #1
    Code3runr

    Code3runr [OP] New Member

    Joined:
    Feb 9, 2021
    Member:
    #19664
    Messages:
    9
    Gender:
    Male
    So I’m new to the 4Runner but not new to Toyota’s and forums. I searched and searched before starting this thread.

    I’m coming from a 2017 Tacoma.

    I just bought a brand new 2021 4Runner trd offroad premium.

    it had 120 miles on it when I bought It and now has about 360.

    I have been having this rattle sound coming from the undercarriage of the vehicle. It only happens when the vehicle is in drive or reverse, at low RPMs and I’m turning the wheels or applying input to the steering wheel (for example, pulling into my garage). It sounds like a loose heat shield but I have done everything to try and remedy the issue. I put hose clamps around the cat heat shield, all the way up to removing the heat shield, yet the rattling persists.

    I checked the skid plates and all other possible bolts and everything is tight.

    Im beginning to think it’s normal for a brand new $50,000 4runner to rattle or make this noise

    I am planning on taking it back to the dealer to raise hell next week but I’m sure I will be told it normal or they can’t reproduce the issue.

    in the mean time, any other suggestions?

    Again, this is a brand new 2021 vehicle with no rust or anything.

    maybe It’s me?
     
    Greenjeepgirl likes this.
  2. Feb 12, 2021 at 5:22 PM
    #2
    dosomeplowin

    dosomeplowin New Member

    Joined:
    Nov 7, 2020
    Member:
    #17754
    Messages:
    155
    Vehicle:
    '22 AG ORP
    Our 2021 is dead quiet. There must be something abnormal. Unfortunately, I have no idea what it might be haha.

    Did you drop the skid plates to see if there's something rattling around above them?
     
  3. Feb 12, 2021 at 5:27 PM
    #3
    Code3runr

    Code3runr [OP] New Member

    Joined:
    Feb 9, 2021
    Member:
    #19664
    Messages:
    9
    Gender:
    Male
    No I didn’t. I’ll tackle that tomorrow when I put the factory cat heat shield back on. Aside from the rattle I love the way the truck drives. I just hate rattles and I know this sound isn’t normal
     
  4. Feb 12, 2021 at 5:55 PM
    #4
    Matt83

    Matt83 New Member

    Joined:
    Jul 11, 2019
    Member:
    #10511
    Messages:
    750
    Northeast
    Before raising hell, ask to take a drive with a Sr Tech at the dealership to replicate the sound for them and go from there.
     
    DrewMan, Mtbpsych, Toy4X4 and 2 others like this.
  5. Feb 12, 2021 at 6:08 PM
    #5
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    12,414
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    This.^^

    Let the dealer fix it for you.
     
    Singleminded and Toy4X4 like this.
  6. Feb 13, 2021 at 1:12 AM
    #6
    ElectroBoy

    ElectroBoy Ad astra

    Joined:
    Jul 29, 2020
    Member:
    #15823
    Messages:
    1,939
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    2018 ORP
    Get a rubber mallet and bang on your skid plates, muffler, cat, spare tire, etc. to duplicate the rattle.
    Check the spare tire chain. Mine would rattle so I took about an 8 inch length of split foam water pipe insulation to cover the free hanging section, then shove it back up into the hub area to buffer it. Tighten the chain well so the spare doesn’t move.

    Another rattle that occurs is the back hatch door latch. It can rattle against its striker plate/bar. One solution is to re-position that striker. If takes some loosening, pounding, tightening, and repeating until it’s aligned just right. The easier fix is to clean the latch bar and wrap black electrical tape around it a few times to take up some room and snug it up. If and when it deteriorates just re-apply the tape.
     
    DrewMan, mve, SlvrSlug and 1 other person like this.
  7. Feb 13, 2021 at 2:24 PM
    #7
    Code3runr

    Code3runr [OP] New Member

    Joined:
    Feb 9, 2021
    Member:
    #19664
    Messages:
    9
    Gender:
    Male
    So I’m pretty sure the rattle is coming from my skid plate. I hit it and it rattles. I checked the bolts though and they are all tight. I want to confirm by removing the skid plates first though. Maybe new rci skids will be the first mod
     
  8. Feb 14, 2021 at 10:36 AM
    #8
    dosomeplowin

    dosomeplowin New Member

    Joined:
    Nov 7, 2020
    Member:
    #17754
    Messages:
    155
    Vehicle:
    '22 AG ORP
    It could be as simple as replacing bolts, adding washers or grommets of some sort. Dealer should be able to sort that out for you, unless you're looking for a good reason to buy new skids haha.
     
    DrewMan likes this.
  9. Feb 14, 2021 at 2:44 PM
    #9
    ElectroBoy

    ElectroBoy Ad astra

    Joined:
    Jul 29, 2020
    Member:
    #15823
    Messages:
    1,939
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    2018 ORP
    I had a skid plate rattle and it was due to a couple of rocks sitting up there!
     
  10. Feb 14, 2021 at 3:09 PM
    #10
    OpBalance

    OpBalance New Member

    Joined:
    Jan 4, 2021
    Member:
    #18906
    Messages:
    70
    Likely the issue
     
    Singleminded likes this.
  11. Feb 14, 2021 at 5:44 PM
    #11
    Code3runr

    Code3runr [OP] New Member

    Joined:
    Feb 9, 2021
    Member:
    #19664
    Messages:
    9
    Gender:
    Male
    But it’s brand new! lol .

    here’s a video

    I havnt had a chance to pull the skids to verify but this is the rattle sound. It’s not the cat that’s for sure. I completely removed the heat shield shown and it still makes the same noise.
     
  12. Feb 14, 2021 at 5:49 PM
    #12
    Code3runr

    Code3runr [OP] New Member

    Joined:
    Feb 9, 2021
    Member:
    #19664
    Messages:
    9
    Gender:
    Male
    Can’t figure out how to upload the video
     
  13. Feb 15, 2021 at 12:49 PM
    #13
    OpBalance

    OpBalance New Member

    Joined:
    Jan 4, 2021
    Member:
    #18906
    Messages:
    70
    A small rock can’t make it into the skid plate because why? Because it has 300 miles in it? Of course it can happen. Being new has nothing to do with it.
     
    DrewMan likes this.
  14. Feb 15, 2021 at 7:15 PM
    #14
    Code3runr

    Code3runr [OP] New Member

    Joined:
    Feb 9, 2021
    Member:
    #19664
    Messages:
    9
    Gender:
    Male
    Here’s the video. Again, it’s not the cat heat shield as I completely removed it and the sound still persists. Still no time to pull skids yet but maybe this will help with diagnosing

    https://youtu.be/kvR5QqHfD7I
     
  15. Feb 15, 2021 at 10:31 PM
    #15
    ElectroBoy

    ElectroBoy Ad astra

    Joined:
    Jul 29, 2020
    Member:
    #15823
    Messages:
    1,939
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    2018 ORP
    It’s hard to exactly tell from the audio, but it sounds like a buzzing noise. If you can’t take the two skids off, (just four bolts in each), try pushing on various items to see if the buzzing stops or changes tone. That may give you a clue. Push with a rubber mallet or even your boot on skids etc in various locations, or maybe a 2x4 on hot items like the cats or exhaust. Good luck.
     
  16. Feb 16, 2021 at 3:05 AM
    #16
    Matt83

    Matt83 New Member

    Joined:
    Jul 11, 2019
    Member:
    #10511
    Messages:
    750
    Northeast
    That sucks to deal with this on a new truck. Seems like you have no issues duplicating it....I would honestly let the dealer fix it.
     
    Singleminded and MM2020pro like this.
  17. Feb 16, 2021 at 4:08 AM
    #17
    importman

    importman The mountains are calling and I must go...

    Joined:
    Sep 21, 2020
    Member:
    #16870
    Messages:
    252
    Gender:
    Male
    First Name:
    Danny
    Carolinas
    Vehicle:
    05 Silver SR5 V6 4X4
    Blacked out, Ironman 3" Nitro Gas Suspension lift, JBA High Caster upper control arms, Differential drop and sway bar relocate, Upgraded to Sport Front Cardone Calipers with Brembo Rotors and Akebono Pads, Added Spoiler, Sony XAV-AX100 with Apple Carplay, USB Jack, Backup Camera, Black TRD Pro Wheels with General Grabber ATX 265/70/17, Rear differential vent extension, Auto Dimming Mirror with Compass and Homelink, Map Light Mod, Tekonsha 90160 Trailer Brake Controller, Recoil SL1708 Sub, Sealight LED Headlamps, K&N drop in air filter, Weathertech floor mats, Homemade rear storage compartment with built in pull out table.
    I would definitely let the dealer take care of it. If you do too much on your own they could claim tampering. I wouldn't put a wrench on a brand new vehicle other than oil changes or tire rotation.
     
    Singleminded likes this.
  18. Feb 16, 2021 at 7:29 AM
    #18
    MM2020pro

    MM2020pro New Member

    Joined:
    Dec 7, 2020
    Member:
    #18377
    Messages:
    20
    Gender:
    Male
    First Name:
    Mike
    Vehicle:
    2020 TRD Pro
    ^^This. Good luck.
     
    importman likes this.
  19. Feb 18, 2021 at 7:03 PM
    #19
    Crossfit4Runner

    Crossfit4Runner New Member

    Joined:
    Aug 7, 2018
    Member:
    #6646
    Messages:
    510
    Gender:
    Male
    Saint Louis
    Vehicle:
    2018 TRD Off Road Permium
    To many to list
    Have you messed with the exhaust ?
     
  20. Feb 19, 2021 at 8:25 AM
    #20
    DGP1961

    DGP1961 New Member

    Joined:
    Sep 17, 2018
    Member:
    #7154
    Messages:
    983
    Gender:
    Male
    Vehicle:
    2018 SR5 Premium
    You keep saying it's new and it is I get that but you did acquire it with 120 miles on it enough for something to happen. I agree about something sitting on the skid plate maybe rolling around. I can't hear anything in your clip. Take the plate off and put it back on you may fix it and not even know what it is you did.
     
  21. Feb 19, 2021 at 11:00 AM
    #21
    GaoKS

    GaoKS New Member

    Joined:
    Dec 2, 2020
    Member:
    #18253
    Messages:
    54
    Gender:
    Male
    Midwest
    Vehicle:
    2023 TRDORP
    I know exactly what it is. I had it on my 2020 and have it now on my 2021. It only happens when the chasis is torqued in reverse or drive and when the wheels are turned. For me, at the middle of the exhaust, the torque on the body was causing just enough flex for the exhaust pipe to touch exhaust flange. Confirmed by having a tech friend get underneath and push at the pipe where it was touching. Went away. Dealer said they couldn’t duplicate it (on the 2020 although they said they did take the VIN and escalate it to an FTS) and since it happens rarely on the 2021, I’ve just lived with it. It was bad on the 2020 I had though.
     
    Last edited: Feb 19, 2021
  22. Feb 20, 2021 at 8:46 PM
    #22
    taco_runner

    taco_runner New Member

    Joined:
    Jun 25, 2020
    Member:
    #15129
    Messages:
    299
    Gender:
    Male
    First Name:
    Kev
    Vehicle:
    4Runner TRD OR Premium
    how about the heat shield ?
     
  23. Feb 20, 2021 at 9:52 PM
    #23
    fajitas21

    fajitas21 New Member

    Joined:
    Aug 2, 2016
    Member:
    #2395
    Messages:
    1,344
    Gender:
    Male
    First Name:
    Lee
    Collierville, TN
    Vehicle:
    2020 ORP
    Custom scratches
    LOL me too.
     
  24. Feb 21, 2021 at 2:32 PM
    #24
    Code3runr

    Code3runr [OP] New Member

    Joined:
    Feb 9, 2021
    Member:
    #19664
    Messages:
    9
    Gender:
    Male
    Just ruling things out. So it’s not the skid plate.

    I completely removed the skid plate and the rattle is still there.

    I narrowed it down to my exhaust system. GaokS mentioned the flange and I loosened and tightened those bolts and same noise persisted.

    I was able to get the noise to stop when I pushed up on the flange area slightly. So I now know this noise is for sure coming from the exhaust system. However it does sound louder towards the muffler vs the flange as GaoKS mentioned. I’m curious if something is loose inside the actual muffler or if it’s rattling on something that I just can’t see.

    when I take it in I’ll tell them and point this out
     
  25. Feb 21, 2021 at 2:57 PM
    #25
    Code3runr

    Code3runr [OP] New Member

    Joined:
    Feb 9, 2021
    Member:
    #19664
    Messages:
    9
    Gender:
    Male
    Here’s what I came up with for now...

    I put a hose clamp on the exhaust hanger and that seems to have cured the rattling.

    8D59CC4F-5F2D-49DE-8F2E-652672AAEF3F.jpg
     
  26. Feb 21, 2021 at 3:06 PM
    #26
    Code3runr

    Code3runr [OP] New Member

    Joined:
    Feb 9, 2021
    Member:
    #19664
    Messages:
    9
    Gender:
    Male
    I wonder if a new exhaust System would cure the issue?
     
  27. Feb 21, 2021 at 4:52 PM
    #27
    Crossfit4Runner

    Crossfit4Runner New Member

    Joined:
    Aug 7, 2018
    Member:
    #6646
    Messages:
    510
    Gender:
    Male
    Saint Louis
    Vehicle:
    2018 TRD Off Road Permium
    To many to list
    I’m having the same sort of issue and it started when I added the Pro Exhaust. I was going to mess with the coupling right there to see if that fixed it.
     
  28. Feb 22, 2021 at 6:49 AM
    #28
    DGP1961

    DGP1961 New Member

    Joined:
    Sep 17, 2018
    Member:
    #7154
    Messages:
    983
    Gender:
    Male
    Vehicle:
    2018 SR5 Premium
    Those clamps work wonders and the heat won't bother them either. I've had one securing a heat shield on my accord for years now. Honda wanted to replace the Shield for like 300.00 I forget exactly. I stopped the rattle with a 1.98 clamp.
     
  29. Feb 23, 2021 at 4:44 PM
    #29
    Crossfit4Runner

    Crossfit4Runner New Member

    Joined:
    Aug 7, 2018
    Member:
    #6646
    Messages:
    510
    Gender:
    Male
    Saint Louis
    Vehicle:
    2018 TRD Off Road Permium
    To many to list
    turns out mine was caused by this gasket disintegrating

    9741BE3B-4E6F-4325-B4F8-2B78CE41CFCD.jpg
     
    taco_runner likes this.
  30. Apr 9, 2022 at 12:12 AM
    #30
    Greenjeepgirl

    Greenjeepgirl New Member

    Joined:
    Apr 9, 2022
    Member:
    #26506
    Messages:
    1
    Gender:
    Female
    First Name:
    Kelsey
    Vehicle:
    2021 toyota 4runner trd pro
    I have a 2021 toyota 4runner trd pro, and I'm having the same noise. It's stumped 4 dealerships so far and no fix yet!
     

Products Discussed in

To Top