What have you done to your 5th Gen 4Runner today?

I think depending on the trim level, some come with H11's or H16's. (At least on the Tacoma).

 

What kinda "Install Tool" comes W/them?? I bought my LED's at Advance auto. The only ones I haven't replaced are the License plate bulbs. All interior & back up lights.

 

Those lights look very nice, I'm using the same type. Just wondering, which camera did you use to take that picture?

 

I know what you mean. I was nervous about the switch to 285's as well, but after some research, I found that 285's are no big deal if you're careful about the weight. Mine come in at 42 lbs.

I don't notice it in the gas pedal, but my mileage dropped by 1mpg.

Couldn't be happier.

 

My 1st day came back good

 

Damn soft-shoes
My heavy foot would never allow such numbers.

 

.
My Google Pixel 3XL on night mode, it basically uses AI to fix all the sensor noise.

 

You get a plastic pry tool

 

Very nice set up! I contacted mean green and he told me it is a 200 amp alternator. If you end up needing/wanting more voltage i suggest hitting up Singer for the toyota voltage booster harness. As long as your 4runner is 2019 and older, it still uses the right plug. Its all plug and play and works with stock and HO alts. Gives you more voltage for charging AGMs and to get full potential out of your amps.

I ordered a 280 amp high output alternator and a voltage booster from Singer Alternators.

Pretty cool, Mike Singer also drives a 4runner, a 2014, so he has experience with our vehicles.

Next week i will be doing the big 3 in 0 gauge OFC and running a couple runs of 0 awg OFC wire to the amp location, plus installing the larger amp.

Probably go with the C4 fabrication passenger battery tray for a dual battery setup.




Did get the new 12" subs installed with the new custom D4S box. Looks and sounds great. But these sundown subs are power hungry and the little 1000rms amp is not enough power. Ill change that next week.

 

I used to run Goodyear Wranglers with Kevlar on my 1999 4runner, and will go back to them when the Nitto's on my 2020 TRD Pro 4runner need replacing: https://www.goodyear.ca/en-CA/tires...ave&webprodid=2732&productcode=75804257200000 This is my choice for compromise between off road and pavement, plus long tire life and quiet ride.

You can see the full Goodyear Wrangler line up here: https://www.goodyear.ca/en-CA/tires/search/2020_Toyota_4Runner_TRD-Pro

 

Which replacement bulbs come in this package?

 

Disregard, scrolled down and found the package details....

Replacement Package Includes: 2 Map Lights, 1 Dome Lights, 2 Vanity Mirror Lights, 4 Door Lights, 1 Glove Box Lights, 2 Trunk/Cargo Lights, 2 License Plate Lights, and 2 Side Mirror Puddle Lights(16 LED bulbs total).

This inteior LED lights kit comes with soft installation tool and placement guide, which would help you install easily

 

I still have not replaced the vanity or license plate bulbs yet since I don't see a reason to have brighter lights on the plates and brighter vanity lights might affect night vision.

 

Discount just notified me that my wheels will be here Thursday/Friday!!

 

Added the valance and had it sprayed with bedliner. Love the look and the texture!

 

I got one of these Antics Design fuse covers for the 2020 and a couple of their grommets.

https://www.ebay.com/itm/2020-Toyota-4Runner-Black-Fuse-Box-Cover-with-Side-Slots/153973030117
https://www.ebay.com/itm/5th-Genera...er-firewall-wire-grommet-2-packs/153924950482

Has anyone else used the Antics fuse cover on their 2020 yet? I'm not sure I'm getting it to snap all the way in. The two anchor holes don't seem to want to anchor very well. I tried putting the stock cover back on and had no problems. I'm going to drive for a few days and see if the Antics one stays in place.

I haven't tried the grommets yet. I don't really have any need for them right now, but I was getting the fuse cover and got the grommets anyway. I'm also not sure if the grommets will work on the 2020, but they probably will.

 

Installed Caltrend Neosupreme seat covers today, the fit is pretty much spot on, happy with the results.
Up next is the TRD pro grille mod then I'll stop blowing money into this beast

 

the lies we tell ourselves...

 

Spidertraxx spacers just gave the truck a whole new look

 

It does look good but what year is that old Ford out there? My brother in law had a '31. Cool cars.

 

its a 31 deluxe model a roadster. Belongs to the dad. It’s cool but I’d have rather seen him get something with some horsepower lol

 

Where does the bumper-cover store when not in use?

 

Didn’t do much today. Spent about 5hrs prepping and Plasti-dipping my wheels. Centre-caps will go back on tomorrow. Here’s what 6 coats looks like.

 

I've been wondering about this too, how long does the finish last?
When it finally start to peel, is it easy to peel the rest off?

 

As someone who has plasti dipped a lot of things, I’d powder coat if you want any longevity.

 

I've used wheel paint in the past and it lasted for years with no need to repaint. I don't know about plasti dip I've never used it. I need to get off y butt and paint mine. Undecided on dark metallic grey or gloss black.

 

Took a heat gun to the front mud flaps. Zero rubbing now

 

Pics?

 

Just bought my very first 4runner this week. It's a wedding present to myself and I'm IN LOVE!! 2018 White TRD Pro.
First mod was a no-brainer. 5% ceramic tint. I'm going to need some help from all you guys n gals for all my future mods.

 

Was it the sun's glare coming off that hood scoop??