1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

BudBuilt Rock Slider Install 5th Gen 4Runner

Discussion in '5th Gen 4Runners (2010-2024)' started by MyWyfsRnnr, Jun 16, 2019.

  1. Jun 16, 2019 at 10:10 PM
    #1
    MyWyfsRnnr

    MyWyfsRnnr [OP] Have you seen the mall?

    Joined:
    Feb 26, 2019
    Member:
    #8958
    Messages:
    852
    Gender:
    Male
    First Name:
    Chris
    Citrus Heights
    Vehicle:
    2018 4Runner TRD
    Prinsu, Blacked-out taillights, tinted fronts, BudBuilt Sliders, BudBuilt Skids, OME lift, 275/70/17 KO2's, LED interior, C4 Fab Diff Skid, Dvr Grab Handle, AnyTime Backup Camera, Badge Overlays, Wet Okole Covers
    I recently purchased Full Skid and Sliders from BudBuilt and found they did not have directions to aid in installation, it is not a hard install but here is a step by step anyways. I give it a 2 out of 5 beers in difficulty. This is my experience with BudBuilt and their product. Shipping for FULL skids and Sliders was $335 to California. When I ordered, it said 8-10 weeks (+2 week for powdercoating). I received shipping confirmation in 12weeks 2 days. Right on schedule as stated on the website. I ordered the .120DOM Rock sliders in textured black powdercoat. They match our Prinsu rack on top. Apparently, the closest spray paint to match this gloss is the Rustoleum Professional Enamel flat black. I purchased the Krylon PRO Semi-gloss Black. It is VERY close. I purchased some and used it to paint the bolts at the end of the install to hide the bolts. BudBuilt has been very good to talk to and has returned calls and emails. Here is the step by step:

    1) When they came, they were shipped and packaged separately. They were Very well packed and there was no damage to the powder coating as I expected. They were shipped out the same day however they got separated in shipping and arrived a day apart.

    IMG_20190612_182104.jpg

    2) I got a helper to lay out the sliders and hardware and prep the existing steps for removal.

    IMG_20190613_172559.jpg

    3) Remove the (6) 10mm bolts and the plastic frame plugs on the frame rail. It is so easy, a 4 year old can do it!

    IMG_20190613_173740.jpg
    IMG_20190613_174227.jpg

    4)Next remove the front parking brake cable bracket (10mm bolt)

    IMG_20190613_174049.jpg

    5) Apparently it was time for a popsicle break

    IMG_20190613_174951.jpg

    6) Next, I installed the lower front bolt (13mm) and pivoted the Sliders up and installed one in the rear.

    IMG_20190613_180931.jpg

    7) Next, I loosely installed a provided bolts (13mm) in every frame hole that had threads. I don't know if all frames are the same etc but the sliders are drilled for many more holes than my frame had.

    IMG_20190613_181911.jpg
    IMG_20190613_181918.jpg

    8) Next went to the other side (driver side) and performed the same steps for removal but also had to remove the stock KDSS Skids. (12mm bolts)

    IMG_20190613_185231.jpg
    IMG_20190613_185234.jpg

    9) Next I removed and loosened the KDSS pump bolts and KDSS Line Brackets.

    IMG_20190613_185249.jpg

    10) Next I removed the gas tank bolts, (4) 12mm bolts on the outside, (2) 12mm bolts on the inside.

    IMG_20190613_190423.jpg IMG_20190613_190446.jpg
    Next I bent all the gas tank tabs so the stock skid mounts up to the slider mounting plates
    IMG_20190613_201418.jpg

    11) Next, I used a wedge to space the KDSS pump and lines out from the frame so the slider mounting plates could slide under them.

    IMG_20190613_192503.jpg

    12) Next, after fitting the driver sliders I noticed that they didn't line up due to high welds on the frame so I had to grind them a little as shown.

    IMG_20190613_194134.jpg
    IMG_20190613_194654.jpg

    I painted the welds and moved on with installing the sliders the same as the PASS side. First installed the front bolt then one in the rear and loosely installed the others, then slowly snugged them all up (13mm) and mounted the gas tank skid.

    13) Next, I noticed the rear KDSS line mount does not line up with the holes in the mounting plate. The bar from the skids does support it but I am going to make a few mods in the future to fix this.

    IMG_20190613_203620.jpg

    14) Next, I reinstalled the KDSS Skids and found that the line skid plate needed to be clearanced around the slider supports.

    IMG_20190613_203952.jpg
    IMG_20190613_204523.jpg

    15) Now, pop a beer and enjoy the fruits of your labor!!!!

    IMG_20190613_205723.jpg
    IMG_20190614_150402.jpg
     

    Attached Files:

    Last edited: Jun 17, 2019
  2. Jun 17, 2019 at 2:41 AM
    #2
    mikeymtbs

    mikeymtbs New Member

    Joined:
    May 26, 2019
    Member:
    #10030
    Messages:
    41
    Gender:
    Male
    First Name:
    Mike
    Vehicle:
    19 TRD ORP
    Good looking sliders and a cutie-pie for a helper.
     
    jgcaps, scottalot, Strandskov and 2 others like this.
  3. Jun 17, 2019 at 8:51 AM
    #3
    MyWyfsRnnr

    MyWyfsRnnr [OP] Have you seen the mall?

    Joined:
    Feb 26, 2019
    Member:
    #8958
    Messages:
    852
    Gender:
    Male
    First Name:
    Chris
    Citrus Heights
    Vehicle:
    2018 4Runner TRD
    Prinsu, Blacked-out taillights, tinted fronts, BudBuilt Sliders, BudBuilt Skids, OME lift, 275/70/17 KO2's, LED interior, C4 Fab Diff Skid, Dvr Grab Handle, AnyTime Backup Camera, Badge Overlays, Wet Okole Covers
    She is a HANDFULL! haha
     
    scottalot, KSJ08, Strandskov and 2 others like this.
  4. Jun 17, 2019 at 2:12 PM
    #4
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    2,443
    Great writeup! Looks like your helper checked out after the popsicle break. :D Those are some nice sliders!
     
    KSJ08, Strandskov and MyWyfsRnnr[OP] like this.
  5. Jun 17, 2019 at 2:17 PM
    #5
    DrewMan

    DrewMan 2016 4RTP-KDSS

    Joined:
    Mar 19, 2017
    Member:
    #3731
    Messages:
    399
    Gender:
    Male
    Middle Tennessee
    Vehicle:
    2016 Magnetic Grey 4Runner Trail Premium
    Bilstein 5100 Series Shocks, Daystar 1.5" Rear Coil Spacer (Mid Left), Level 8 Tracker Pros 17x9, 275/70/R17 B.F. Goodrich TKO's, N-Fab Nerf Steps
    Great write up on this install and looks great! … my 4Runner has KDSS and man that seems like a lot of work; any other mods during install that you failed to mention because of having KDSS… like having to add more length to lines .. are you pretty happy with them?

    Great to have help you can count on … Happy Fathers Day!
     
    KSJ08 and Strandskov like this.
  6. Jun 17, 2019 at 2:22 PM
    #6
    MyWyfsRnnr

    MyWyfsRnnr [OP] Have you seen the mall?

    Joined:
    Feb 26, 2019
    Member:
    #8958
    Messages:
    852
    Gender:
    Male
    First Name:
    Chris
    Citrus Heights
    Vehicle:
    2018 4Runner TRD
    Prinsu, Blacked-out taillights, tinted fronts, BudBuilt Sliders, BudBuilt Skids, OME lift, 275/70/17 KO2's, LED interior, C4 Fab Diff Skid, Dvr Grab Handle, AnyTime Backup Camera, Badge Overlays, Wet Okole Covers
    Yeah, her attention span is about as long as she is! haha. She stayed out in the shop the rest of the night working on her own toys, mostly to stay up late I am sure. They are very nice sliders, I am happy with the quality, the welds are good, the plates lined up to the threaded holes well. I have no complaints. I am planning on installing the full skid system this week. There is a good write up on this already so I wont be doing a write up on that one.
     
  7. Jun 17, 2019 at 2:29 PM
    #7
    MyWyfsRnnr

    MyWyfsRnnr [OP] Have you seen the mall?

    Joined:
    Feb 26, 2019
    Member:
    #8958
    Messages:
    852
    Gender:
    Male
    First Name:
    Chris
    Citrus Heights
    Vehicle:
    2018 4Runner TRD
    Prinsu, Blacked-out taillights, tinted fronts, BudBuilt Sliders, BudBuilt Skids, OME lift, 275/70/17 KO2's, LED interior, C4 Fab Diff Skid, Dvr Grab Handle, AnyTime Backup Camera, Badge Overlays, Wet Okole Covers
    No mods to the KDSS, I wedged it out a little to get the plates under the lines and then I bolted it back. There is just enough play in the lines to make this work without modification. I did mention that the one bar actually moves the KDSS line up a little so the mount hole does not line up anymore. I am going to drill and tap the plate and use a factory bolt. A good quality self tapper could do the job quick and dirty if one did not have access to taps etc. I am happy with them, I will be testing them out this weekend in fact! There is a dry bed creek crossing that will break them in for sure this weekend.
     
    eggcouncil, KSJ08, Strandskov and 2 others like this.
  8. Dec 8, 2019 at 2:49 AM
    #8
    eggcouncil

    eggcouncil New Member

    Joined:
    Dec 8, 2019
    Member:
    #12245
    Messages:
    9
    Gender:
    Male
    Vehicle:
    2020 TRD Off-Road Premium w/KDSS
    RSG angled rock sliders; Goodyear Wrangler All-Terrain Adventure With Kevlar
    Do you think the thickness of the mounting plate puts any stress on the KDSS lines or pump? It’s probably paranoia on my part, but the lines are so rigid. It seems that every slider installs behind the lines like this, so I figure it is ok, but my paranoia is kicking in after doing the install...I wasn’t able to loosen the pump, but with a friend’s help, we were able to pull the KDSS lines away enough without exerting too much force.

    Great write-up! Wish I had found it before installing mine yesterday :). Today, I hurt in places I didn’t know existed...
     
    MyWyfsRnnr[OP] likes this.
  9. Dec 8, 2019 at 6:02 AM
    #9
    MyWyfsRnnr

    MyWyfsRnnr [OP] Have you seen the mall?

    Joined:
    Feb 26, 2019
    Member:
    #8958
    Messages:
    852
    Gender:
    Male
    First Name:
    Chris
    Citrus Heights
    Vehicle:
    2018 4Runner TRD
    Prinsu, Blacked-out taillights, tinted fronts, BudBuilt Sliders, BudBuilt Skids, OME lift, 275/70/17 KO2's, LED interior, C4 Fab Diff Skid, Dvr Grab Handle, AnyTime Backup Camera, Badge Overlays, Wet Okole Covers
    I am with you on the Paranoia on bending and stressing the lines. I gave a little extra push on mine with the wedge to bend the lines that go forward to take a little of the stress off permanently. I have not had any problems yet and it really doesn't move everything too far so the added stress is not "that" significant. I wouldn't worry about it. I've done far worse to brake systems on other projets. Like I said, my biggest concern was the lines going to the front because their length doesn't allow for the new tension to be dispersed over a long run. If I remember correctly, they had a little play in their brackets if you loosen the mounts a little. We have been beating on this poor car and the sliders and skids have been put through their paces with no problems yet. You should be very happy with your purchase.
     
    eggcouncil[QUOTED] likes this.
  10. Dec 8, 2019 at 6:06 AM
    #10
    MyWyfsRnnr

    MyWyfsRnnr [OP] Have you seen the mall?

    Joined:
    Feb 26, 2019
    Member:
    #8958
    Messages:
    852
    Gender:
    Male
    First Name:
    Chris
    Citrus Heights
    Vehicle:
    2018 4Runner TRD
    Prinsu, Blacked-out taillights, tinted fronts, BudBuilt Sliders, BudBuilt Skids, OME lift, 275/70/17 KO2's, LED interior, C4 Fab Diff Skid, Dvr Grab Handle, AnyTime Backup Camera, Badge Overlays, Wet Okole Covers
    In fact, this is the first rock that got me 10 seconds after our friend snapped this pic rather than spotting us!... It is always the play and things you don't have to do that gets us in trouble!

    123_1~3.jpg
     
    DrewMan, WallyT4R and eggcouncil like this.
  11. Dec 8, 2019 at 6:11 AM
    #11
    eggcouncil

    eggcouncil New Member

    Joined:
    Dec 8, 2019
    Member:
    #12245
    Messages:
    9
    Gender:
    Male
    Vehicle:
    2020 TRD Off-Road Premium w/KDSS
    RSG angled rock sliders; Goodyear Wrangler All-Terrain Adventure With Kevlar
    Thanks for the reassurance! I think I’d be more nervous about intentionally bending the lines than getting comfortable with the overall addition of tension to the system, so I think I’ll leave it be :). We really didn’t have to yank on the lines too hard to get the mounting plate under them, just a bit harder the closer to the pump we got. I put in RSG angled sliders with a top plate, and they look awesome! Can’t wait to test them out.
     
  12. Dec 8, 2019 at 6:59 AM
    #12
    MyWyfsRnnr

    MyWyfsRnnr [OP] Have you seen the mall?

    Joined:
    Feb 26, 2019
    Member:
    #8958
    Messages:
    852
    Gender:
    Male
    First Name:
    Chris
    Citrus Heights
    Vehicle:
    2018 4Runner TRD
    Prinsu, Blacked-out taillights, tinted fronts, BudBuilt Sliders, BudBuilt Skids, OME lift, 275/70/17 KO2's, LED interior, C4 Fab Diff Skid, Dvr Grab Handle, AnyTime Backup Camera, Badge Overlays, Wet Okole Covers
    RSG was our second choice but we ended up deciding no because of their label on them. I know it is a little petty but I REALLY dont like having companies names on my stuff if they aren't paying me to! Haha! I am really struggling with ordering the victory 4x4 front bumper for this reason, I am probably going to cover the label. I know I am ridiculous but oh well.
     
    Thatbassguy, WallyT4R and KSJ08 like this.
  13. Dec 8, 2019 at 7:01 AM
    #13
    muffdiver

    muffdiver New Member

    Joined:
    May 26, 2019
    Member:
    #10026
    Messages:
    28
    Gender:
    Male
    First Name:
    Ty
    Just out of curiosity, does your 4runner say Toyota on it anywhere?
     
  14. Dec 8, 2019 at 7:02 AM
    #14
    eggcouncil

    eggcouncil New Member

    Joined:
    Dec 8, 2019
    Member:
    #12245
    Messages:
    9
    Gender:
    Male
    Vehicle:
    2020 TRD Off-Road Premium w/KDSS
    RSG angled rock sliders; Goodyear Wrangler All-Terrain Adventure With Kevlar
    Haha, I totally understand that! I don’t like advertising for free either, but their logo is kinda cool, so I went with it :)
     
  15. Dec 8, 2019 at 7:02 AM
    #15
    MyWyfsRnnr

    MyWyfsRnnr [OP] Have you seen the mall?

    Joined:
    Feb 26, 2019
    Member:
    #8958
    Messages:
    852
    Gender:
    Male
    First Name:
    Chris
    Citrus Heights
    Vehicle:
    2018 4Runner TRD
    Prinsu, Blacked-out taillights, tinted fronts, BudBuilt Sliders, BudBuilt Skids, OME lift, 275/70/17 KO2's, LED interior, C4 Fab Diff Skid, Dvr Grab Handle, AnyTime Backup Camera, Badge Overlays, Wet Okole Covers
    Haha! Well played! Yes, however, we did black it out! Haha
     
  16. Dec 8, 2019 at 7:03 AM
    #16
    muffdiver

    muffdiver New Member

    Joined:
    May 26, 2019
    Member:
    #10026
    Messages:
    28
    Gender:
    Male
    First Name:
    Ty
    I'm with ya on the brand logo stuff by the way. :cheers:
     
    MyWyfsRnnr[OP] likes this.
  17. Dec 8, 2019 at 7:08 AM
    #17
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,542
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    I think if it was your company, and you were trying to get your product on the market you would think a little differently. To each their own though.
     
    Thatbassguy likes this.
  18. Dec 8, 2019 at 9:32 AM
    #18
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    2,443
    Then I am ridiculous also, totally agree!
     
  19. Dec 8, 2019 at 9:34 AM
    #19
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    2,443
    Yeah but you can hardly notice it since it's all blacked out. I have had several people come up to me recently and ask me what my vehicle is.
     
  20. Jan 6, 2020 at 10:41 AM
    #20
    TRDPro916

    TRDPro916 New Member

    Joined:
    Jul 13, 2019
    Member:
    #10535
    Messages:
    235
    Gender:
    Male
    Vehicle:
    4Runner Pro
    Currently stock; MODS coming soon.
    Great write up!!!
     
  21. Jan 7, 2020 at 5:42 PM
    #21
    mikeymtbs

    mikeymtbs New Member

    Joined:
    May 26, 2019
    Member:
    #10030
    Messages:
    41
    Gender:
    Male
    First Name:
    Mike
    Vehicle:
    19 TRD ORP
    Just FYI, RSG will sell you their sliders without their logo riveted on the step. I have them on my truck.
     
  22. Jan 31, 2020 at 6:51 AM
    #22
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    5,536
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    @MyWyfsRnnr, thanks for the great writeup and excellent photos.

    Do you happen to know the weight of these sliders?
     
  23. Jan 31, 2020 at 8:41 AM
    #23
    MyWyfsRnnr

    MyWyfsRnnr [OP] Have you seen the mall?

    Joined:
    Feb 26, 2019
    Member:
    #8958
    Messages:
    852
    Gender:
    Male
    First Name:
    Chris
    Citrus Heights
    Vehicle:
    2018 4Runner TRD
    Prinsu, Blacked-out taillights, tinted fronts, BudBuilt Sliders, BudBuilt Skids, OME lift, 275/70/17 KO2's, LED interior, C4 Fab Diff Skid, Dvr Grab Handle, AnyTime Backup Camera, Badge Overlays, Wet Okole Covers
    122 total. They are 94lbs for the pair, plus 28lbs for the diamond plate fillers

    IMG_20200131_083855.jpg
     
    Harringbr99 and WallyT4R like this.
  24. Oct 22, 2020 at 7:43 AM
    #24
    gonecamping

    gonecamping New Member

    Joined:
    Aug 22, 2019
    Member:
    #10990
    Messages:
    6
    Gender:
    Male
    First Name:
    Chris
    SoCal
    Vehicle:
    TRD OR w/ KDSS
    This is a great write up. I really like the diamond plate. Textured powder coat looks awesome too.

    Now that you've had them for a while any regrets? How are they as steps?
     
  25. Oct 22, 2020 at 8:18 AM
    #25
    MyWyfsRnnr

    MyWyfsRnnr [OP] Have you seen the mall?

    Joined:
    Feb 26, 2019
    Member:
    #8958
    Messages:
    852
    Gender:
    Male
    First Name:
    Chris
    Citrus Heights
    Vehicle:
    2018 4Runner TRD
    Prinsu, Blacked-out taillights, tinted fronts, BudBuilt Sliders, BudBuilt Skids, OME lift, 275/70/17 KO2's, LED interior, C4 Fab Diff Skid, Dvr Grab Handle, AnyTime Backup Camera, Badge Overlays, Wet Okole Covers
    Thanks. Yeah, the are awesome. I am still super happy with them. No powder coat fade or chalking. They are on my wife's daily and no wear issues on the driver side where she uses it as a step everyday. These are the angled sliders so as a step they are high but my daughter is 6 now and 41" tall and she can get in and out without help using them as a step. The wife was the one who chose the diamond plate (I was not a fan). After using it and with the "textured" powder coat they use I really like it now. No slipping. I use them for RTT set up and top access/storage. I have beaten the bottom of the up a bit on some trails and they have done their job. No regrets at all and I would buy them again for sure. I attached a picture of the driver slider after years of using it as a step. You can kind of see little scratches but they are barely there.
    16033795667388556356538376702124.jpg
     
    A&P and gonecamping[QUOTED] like this.

Products Discussed in

To Top