1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Unhappy with new suspension

Discussion in '4th Gen 4Runners (2003-2009)' started by 4runningMan, Nov 6, 2019.

  1. Nov 6, 2019 at 4:23 PM
    #1
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    So. We installed KYB front shocks/springs and KYB rear shocks + new oem springs on a 2008 T4R. Everything I read in my research (mostly this and the other forum) said if anything, the new KYB coilovers in the front would lift the front end a bit over stock.

    well, we got it all installed and the front measurements are actually 3/4” lower and the rear is 3/4” higher than it was with all the old stock components.

    and we already had 2.5” rake before we installed all the new stuff. So now we’re sitting with about a 4”+ rake.

    totally opposite of what I was expecting. And we’re really bummed. What’s my best way to fix this? Simply get some adjustable 5100’s and raise the front 2”? That’s getting to be more lift than I’d like (without new control arms, etc).

    can not figure out what happened here. We thought the front was extra low before we started because the bushings were hammered. But to install the new stuff and come down another 3/4” was shocking.
     
    Sawbones likes this.
  2. Nov 6, 2019 at 4:35 PM
    #2
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,542
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    That is kind of odd that it came out 3/4” lower, i hope someone on here can help you. Maybe you can contact Dobinsons and see what they can tell you. Good luck man.
     
    4runningMan[OP] likes this.
  3. Nov 6, 2019 at 5:54 PM
    #3
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    Yeah super weird to be lower in front. The rear coming up as much as it did was to be expected from the old sagging rear springs. But even with the rear coming up, you wouldn’t think the front would go down 3/4” with a new set of coilovers. Just bizarre.

    only thing I can think of is the KYB springs are weaker. But not 3/4” down from 12 year old OEM springs weaker. Stumped.
     
  4. Nov 6, 2019 at 6:19 PM
    #4
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    2,443
    Wrong springs/parts???:notsure:
     
  5. Nov 6, 2019 at 7:44 PM
    #5
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    The boxes from rock auto were labeled for the truck we have. So I assume the correct parts...
     
    WallyT4R[QUOTED] likes this.
  6. Nov 6, 2019 at 7:47 PM
    #6
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,083
    Vehicle:
    1996 SR5 Limited
    I have KYB shocks on my Z28 and Sandrail. But for springs I would of gone with Eibach..
     
  7. Nov 6, 2019 at 7:57 PM
    #7
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    I got the KYB coilovers that came with the spring installed on the shock. If i got eibach springs could they be installed on the same shock? Or better off starting from scratch?

    We weren’t intending to lift at all. But the way it’s sitting with the new oem rear springs, it’s almost like we need a true lift spring in front. That’s what’s baffling to me at this point.
     
  8. Nov 6, 2019 at 7:58 PM
    #8
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,083
    Vehicle:
    1996 SR5 Limited
    Yes with a spring compressor.
     
    4runningMan[OP] likes this.
  9. Nov 6, 2019 at 7:59 PM
    #9
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    2,443
    Did you assemble the front coilovers yourselves? Did you forget to put the top plate in?
     
  10. Nov 6, 2019 at 8:41 PM
    #10
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    I had the Toyota dealer do the install (I’m not set up for this kind of work at the moment). Please spare me the grief ;)

    This is all new to me. What is the top plate? I got the fronts from rock auto. The spring was already installed on the shock when i got it— “quick struts”.
     
  11. Nov 6, 2019 at 9:18 PM
    #11
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    2,443
    No grief intended, just trying to figure it out. If they came assembled the top is probably there. Can you take a good pic of the fronts?
     
  12. Nov 6, 2019 at 9:34 PM
    #12
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    I appreciate you guys helping me brainstorm this one. I’ll grab some photos tomorrow.

    Every single forum review I read about these quick struts said expect the front to come up an inch or two. Some even ended up taller in front than the rear and ended up level after some settling.

    Ha if we get settling now, we’re gonna have like a 4-5” rake. I figured a lot of those guys that ended up taller in front prob just had sagging rear springs. That’s the whole reason I went with new rear springs, too, in addition to the new fronts.
     
  13. Nov 7, 2019 at 5:21 PM
    #13
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    Ok guys. What say you? These look way too compressed to me. Am I correct in my analysis?

    I’ve read that the KYB Quick Strut springs have one more coil than oem, but that alone shouldn’t cause what I’m seeing. Right?

    Driver
    B55A4921-666C-4EBD-96B6-4BD5FE51B87C.jpg

    passenger
    8EB0E8CF-5FF5-417F-93BB-A55C99909881.jpg
     
  14. Nov 7, 2019 at 6:03 PM
    #14
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,542
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    That looks pretty darn tight to me.
     
    Toy4X4, WallyT4R and 4runningMan[OP] like this.
  15. Nov 7, 2019 at 6:07 PM
    #15
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,542
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    I know it is not apples to apples but.

    A8B2AB7F-223E-4374-910D-134A63F027DF.jpg
     
    Toy4X4 and 4runningMan[OP] like this.
  16. Nov 7, 2019 at 6:14 PM
    #16
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    Drivers side is incredibly tight. What would cause this? Only thing I can think of is a weak spring. But getting two weak springs seems unlikely.
     
    Last edited: Nov 7, 2019
    Toy4X4 likes this.
  17. Nov 7, 2019 at 6:35 PM
    #17
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,542
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    Are you sure they shipped you the right setup?
     
    WallyT4R likes this.
  18. Nov 7, 2019 at 6:37 PM
    #18
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    2,443
    That just looks weird. Still think it may be the wrong springs/parts. They are to be put on side specific so hopefully you have them on the right sides in front. That part number gels with the 2008 4runner so just weird?? Would be good to see a pic of the top also if you can get one.
     
    Last edited: Nov 7, 2019
  19. Nov 7, 2019 at 7:14 PM
    #19
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    Yes. Part numbers are a match for our 2008 T4R.
     
  20. Nov 7, 2019 at 7:18 PM
    #20
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    Yep, part number is a match. Installed on the correct sides. I’ll go grab a pick of the top...
     
    WallyT4R[QUOTED] likes this.
  21. Nov 7, 2019 at 7:21 PM
    #21
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,542
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    That is really strange for them to be that compressed.
     
  22. Nov 7, 2019 at 7:51 PM
    #22
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    Driver
    7C442001-F078-4C28-BB24-50322F8DDC4B.jpg

    passenger
    EDA90679-2D34-4797-987E-C2B6B80A64A4.jpg
     
    WallyT4R likes this.
  23. Nov 7, 2019 at 7:55 PM
    #23
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    When I bounce on the front end, it feels like I have about an inch of play and then it feels dead.

    Pre-install of new components (hub center to fender)
    18.5” front
    21” rear

    Post-install
    17 3/4” front
    21 3/4” rear (w/ new oem rear springs)
     
  24. Nov 7, 2019 at 9:41 PM
    #24
    ForRun

    ForRun 4Runner

    Joined:
    May 25, 2019
    Member:
    #10019
    Messages:
    3,045
    Gender:
    Male
    Vehicle:
    2020 orp
    Do you trust this dealer? Had a Ford years back I let a dealer do the lift. Took another dealer and 2 grand. They ruined actuators, hubs and needed new axle shafts(1st dealer ate the cost) .
    Not all dealers are talented
     
  25. Nov 7, 2019 at 10:39 PM
    #25
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    Yeah I trust them. I’ve known the service manager for years. He’d feel ashamed if his guys messed up and weren’t upfront about problems encountered (if there were any). I haven’t yet gone back to talk to him about it. Just been too busy this week.

    There were multiple options for KYB suspension components on the rock auto website for this particular vehicle (no surprise there). I’m thinking I must have selected the wrong part.

    When I ordered the coilovers, one arrived damaged (shock was dented). I returned it and got a replacement the next day. No big deal. But now to have both coilovers sitting like they are, installed... it just must be the wrong part. The odds of getting two “faulty” springs is slim to none and they appear to be installed correctly. I’ve looked them up and down and everything looks just fine.

    I’m gonna call rock auto or KYB tomorrow and hopefully figure this out. I do appreciate all you guys chiming in. Thanks.
     
  26. Nov 8, 2019 at 4:37 AM
    #26
    Libagui

    Libagui New Member

    Joined:
    Jul 15, 2019
    Member:
    #10563
    Messages:
    134
    Gender:
    Male
    First Name:
    Librado
    Vehicle:
    2006 Silver 4runner limited.
    Just search for a set of 3rd generation Tacoma. I was 18" and hot 21-1/2" after install.
    IMG_20191030_100418133.jpg
     
    4runningMan[OP] likes this.
  27. Nov 8, 2019 at 4:54 AM
    #27
    Libagui

    Libagui New Member

    Joined:
    Jul 15, 2019
    Member:
    #10563
    Messages:
    134
    Gender:
    Male
    First Name:
    Librado
    Vehicle:
    2006 Silver 4runner limited.
    Your part number from that picture is wright and the installation seems wright too. Only conclusion I can make is it is a quality matter.
     
  28. Nov 8, 2019 at 8:40 AM
    #28
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    Ok guys. I might have figured it out. This is what I ordered. It says it’s for RWD. We have a 4WD truck. I just assumed RWD in the description pertained to our truck being RWD, which is is (most of the time!!!). Ha.

    B031B788-9E89-4222-BD06-980752D6F716.jpg

    and this description here says 4WD.
    6642DAE2-0DDC-406F-BAD9-BAD595415BD7.jpg

    I ordered the RWD ones because it had the US flag next to it, as that means it’s for the US market. The 4wd ones do not have the flag. But maybe that’s an oversight by Rock Auto?

    Anyway— what say you? Might this be the problem? Are there different versions of front coilovers for non-4wd vs. 4wd 4runners??

    Tell me I’m an idiot. That’s fine. We just want to get this fixed!! Thanks guys.
     
  29. Nov 8, 2019 at 8:47 AM
    #29
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,083
    Vehicle:
    1996 SR5 Limited
    I would send them back and reorder directly from KYB. There might be a newer version out with better valve ing. Like KYB gas-a-just....
     
    4runningMan[OP] likes this.
  30. Nov 8, 2019 at 10:38 AM
    #30
    nimby

    nimby in the drink

    Joined:
    Mar 27, 2017
    Member:
    #3777
    Messages:
    4,451
    First Name:
    Jake
    California
    Vehicle:
    2018 SR5P
    You probably got the front springs from a 2wd and with the heavier front end of your 4wd it's compressing the springs, making that scrunched look.

    So yes, ordering the 4wd springs would probably fix your issue.
     

Products Discussed in

To Top